Checkpoint Quantum SMART-1 600-M User manual

[Classification: Protected]
17 February 2022
QUANTUM SMART-1 600-
M/6000-L/6000-XL
APPLIANCES
REPLACING

Check Point Copyright Notice
© 2021 - 2022 Check Point Software Technologies Ltd.
All rights reserved. This product and related documentation are protected by copyright and distributed under
licensing restricting their use, copying, distribution, and decompilation. No part of this product or related
documentation may be reproduced in any form or by any means without prior written authorization of Check
Point. While every precaution has been taken in the preparation of this book, Check Point assumes no
responsibility for errors or omissions. This publication and features described herein are subject to change
without notice.
RESTRICTED RIGHTS LEGEND:
Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraph (c)
(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and FAR
52.227-19.
TRADEMARKS:
Refer to the Copyright page for a list of our trademarks.
Refer to the Third Party copyright notices for a list of relevant copyrights and third-party licenses.

Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Transceivers
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Transceivers|3
Important Information
Latest Software
We recommend that you install the most recent software release to stay up-to-date with the
latest functional improvements, stability fixes, security enhancements and protection against
new and evolving attacks.
Certifications
For third party independent certification of Check Point products, see the Check Point
Certifications page.
Check Point Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing
Transceivers
For more about this release, see the home page.
Latest Version of this Document in English
Download the latest version of this document in PDF format.
Feedback
Check Point is engaged in a continuous effort to improve its documentation.
Please help us by sending your comments.
Revision History
Date Description
17 February 2022 Rebranding - New Check Point logo
12 April 2021 Updated for Smart-1 600-M appliances
25 February 2021 First release of this document for Smart-1 6000-L/6000-XL appliances

Table of Contents
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Transceivers|4
Table of Contents
Safety Instructions 5
Replacing a Transceiver 6

Safety Instructions
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Transceivers|5
Safety Instructions
Important
nRead the Health and Safety Information in the Getting Started guide for your appliance. For a list of
all Appliances Getting Started guides, see sk96246.
nTo protect the appliance and transceivers from electrostatic discharge, make sure that you are
grounded.
nWe recommend that you use an ESD grounding wrist strap. Connect the grounding plug on the wrist
strap to the chassis grounding point.

Replacing a Transceiver
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Transceivers|6
Replacing a Transceiver
If your expansion line card contains removable transceivers, you can install and replace these transceivers.
For a list of supported transceivers, see:
https://www.checkpoint.com/downloads/products/smart-1-security-management-platform-datasheet.pdf
Item Description
1 Expansion line card with fiber optic ports
2 Transceiver
3 Transceiver latch
To install a transceiver:
1. Push the transceiver into an expansion line card port until it snaps into position.
2. Turn the transceiver latch lever up to lock into the expansion line card.
3. Connect the fiber optic cable to the transceiver.
To remove a transceiver:
1. Disconnect the fiber optic cables from the transceiver.
2. Pull the latch lever down to release the transceiver.
3. Gently, pull the transceiver out of the expansion line card.