Chefman RJ25-C User manual

CHOICE CUT ELECTRIC
Meat grinder
QUICK LINKS
• Quick Start Guide
• User Guide
This is your one-stop guide to using your
product. From the below links, you can jump
ahead to a specific document if desired.

12
QUICK START GUIDE
BEFORE FIRST USE
WHAT’S IN THE BOX
1. Remove all packing materials and stickers, but don’t throw away just yet! Reference
this guide to check that all parts are included.
2. Wash the Loading Tray, Food Pusher, Chute, Auger, Blade, Fastening Ring, Collection
Tray, Grinding Plates, Sausage and Kibbeh Attachments in warm, soapy water.
WARNING: Never immerse the Main Body of the Meat Grinder or its plug in water or any
other liquids.
3. Dry thoroughly.
4. Read all instructions in the User Guide and follow them carefully.
Main Body
Chute
Auger
Fastening Ring
Blade
1
WHAT’S IN THE BOX

34
HOW TO USE
STEP 1:
Attach Chute to Main Body,
Twist Knob clockwise to tighten.
WHAT’S IN THE BOX
3mm Fine
Grinding Plate:
Used for pâté,
hamburgers, bread
crumbs, bologna,
hot dogs and jerky.
Food Pusher:
Used to guide
food down
into the Chute.
Collection Tray/
Storage Tray (Clear)
Kibbeh
Attachments
(Black):
Used to
make kibbeh.
Round Sausage
Attachment (Black)
Round Sausage
Attachment (White)
Loading
Tray
5mm Medium
Grinding Plate:
Used for hamburgers,
meatballs, meatloaf
and most sausages.
8mm Coarse
Grinding Plate:
Used for chili,
chorizo and chunky
ground meat.
12mm Small Sausage
Stuffing Funnel:
Used for jerky and
breakfast sausages.
20mm Large Sausage Stuffing Funnel: Hot dogs,
breakfast sausages and bratwurst.
16mm Medium Sausage
Stuffing Funnel: Used for
jerky, bratwurst and italian
and breakfast sausages.
GRINDING PLATES:
SAUSAGE ATTACHMENTS:
OTHER TOOLS:

56
STEP 2:
Place Loading Tray on top of Chute.
STEP 4:
Twist Fastening Ring
clockwise over
Grinding Plate to secure.
STEP 6:
Put chilled meat cubes onto Loading
Tray. Plug in grinder and turn Back
switch On first, then the side switch.
• Make sure all pieces are connected and fully assembled to Main Body before
using.
• Double-check that the meat you’ve prepared for grinding has no bones or hard
cartilage that could potentially jam the grinder.
• Do NOT grind fibrous foods like nuts and ginger.
• Meat may be seasoned with spices and/or herbs before grinding, if desired.
• Use this Meat Grinder for all types of meats! Try out your favorites like lamb,
duck, chicken and beef.
STEP 7:
When meat is done grinding, allow
Meat Grinder to run for an
additional 30-60 seconds to fully
push through any remaining meat.
STEP 3:
Insert Auger into Chute. Place
Blade (smooth, curved side
facing Auger) onto Auger and
then place desired Grinding
Plate over Blade.
STEP 5:
Put chilled meat cubes onto
Loading Tray. Plug in grinder
and turn Back switch On first,
then the side switch.
STEP8:
Turn the front switch Off. Note: Back
switch does not have an off, only on
and reverse.
STEP 9:
Unplug Meat Grinder.
HOW TO USE
TIPS
HOW TO USE

7
1. Ensure that the Meat Grinder is unplugged and cool before cleaning.
2. Disassemble parts from Main Body and clean out meat from Chute and Grinding Plates
with a bottle brush.
3. Clean all parts- except for Main Body- with warm, soapy water using a cloth or
non-abrasive sponge.
4. Dry all pieces and attachments.
5. Evenly coat a thin layer of vegetable or food-grade mineral oil on Grinding Plates, Auger,
Blade, Fastening Ring and Chute. This will help prevent rust from developing.
6. Once these parts are fully dry, store individually in a sealable bag with a handful of rice.
Or, store parts in Collection Tray. The Loading Tray also doubles as its lid for storage.
CLEANING AND MAINTENANCE

9
READ ALL INSTRUCTIONS BEFORE USE
For your safety and continued enjoyment of this product, always read the instruction manual before using.
USER GUIDE
COOKING FORWARD™
Thanks for purchasing a Chefman® appliance.
Love to cook or rarely enter the kitchen? We’ve got you covered. Creating innovative
kitchen appliances and guides for all skill levels just so happens to be our expertise.
Saving time, reducing stress, and cooking more efficiently are just a few things to enjoy
as you create restaurant-quality meals using our products. You’ll embrace a new world of
culinary possibilities and cook with confidence. We like to call this the cooking forward
effect!
So go ahead, promote yourself from cook to head chef in your household. (You deserve it!)
From our kitchen to yours,
The Chefman® Team
8
Gone are the days where the only place for meat grinders was behind the counter at
your local butcher shop. Grinding meat at home not only allows you to control exactly
what goes into your food, but it also allows you to choose the perfect grind for
specific recipes. Want a chunky burger that’s half beef, half pork? Use the 5mm plate.
Want a thinner patty? Use the 3mm plate. With the Chefman Choice Cut 700-Watt
Electric Meat Grinder, you can grind meat for everything from meatballs to specialty
sausages. The flavor will be fresher, and you’ll save money by buying in bulk and
grinding yourself.
The Chefman Choice Cut Electric Meat Grinder has a heavy-duty 700-watt motor that
grinds about 3½ lbs of meat per minute; plus, a sleek, compact design—and not to
mention bragging rights next time you see your butcher! Whether you’re new to meat
grinding, it’s a hobby of yours, or you’re a meat connoisseur, we know you’ll love using
this Meat Grinder. Great cooking starts long before the food hits the flame, so be sure
to read this User Guide before you get started.
INTRODUCTION

10 11
12 Safety Instructions
16 Features
17 Operating Instructions
21 Cleaning and Maintenance
22 Troubleshooting
23 Cooking Tips
25 Terms and Conditions
26 Warranty Card
CONTENTS
• “Kibbeh” is derived from the Arabic word for “ball.” Kibbeh that’s rolled by hand
resembles small footballs, while in the meat grinder it comes out sausage-shaped.
• The Italian word for meatball is polpetta. In the Abruzzo region of Italy small meatballs,
or polpettine, are served in small bites the size of marbles.
• References to the “hamburger” being served as a sandwich date back as far as the
1880s, but the World’s Fair in St. Louis infamously claims it was the first to invent the
hamburger as well as the hot dog and iced tea.
• The first recorded recipe for meatloaf is from the 1870s, and it instructed you to add
pepper, salt, onion, bread and egg—the very same ingredients you’ll find in most
recipes today!
FUN FACTS

12 13
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS
FOR HOUSEHOLD USE ON LY.
WARNING: When using electrical appliances, especially when children are present, basic safety
precautions should always be followed to reduce the risk of fire, electric shock and/or injury to
persons, including the following:
• Read all instructions.
• Before using for the first time, remove all packaging, and wash and dry parts.
• Use caution when handling raw meat. Ensure that it is fresh and properly stored, before
and after grinding. Always wash all parts of the Meat Grinder thoroughly, with warm, soapy
water and a soft towel or non-abrasive sponge, after every use.
• This Meat Grinder should NOT be used by or near children or individuals with certain
disabilities.
• This Meat Grinder is not intended for use by persons, including children, with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning the use of this Meat Grinder by a
person responsible for their safety.
• Children should always be supervised when the Meat Grinder is present. Children should not
play with the Meat Grinder.
• Do NOT operate your Meat Grinder in an appliance garage or under a wall cabinet. When
storing in an appliance garage, always unplug the unit from the electrical outlet. Failure
to do so will result in risk of fire, especially if the Meat Grinder touches the walls of the
appliance garage or the door touches the unit as it closes.
• Always carry the Meat Grinder by the base, or Main Body. Do NOT carry the grinder by the
Chute.
• Always operate the Meat Grinder on a flat, sturdy surface.
• Ensure that the Meat Grinder is not placed close to the edge of the table, worktop, etc.,
where it can be pushed off or fall.
• Never put this Meat Grinder near a hot burner, oven or in a dishwasher.
• Never plug in the Meat Grinder where water may flood the area.
• Do NOT let the cord hang over edge of table or counter, come in contact with sharp edges
or touch hot surfaces.
• Do NOT use outdoors or use for anything other than its intended use.
• Only operate the unit when it is completely assembled.
• Do NOT operate this Meat Grinder, or any other electrical equipment, with a damaged cord
or plug.
• Do NOT use this Meat Grinder if it malfunctions or it has been dropped or damaged. In such
cases, contact Chefman Customer Service for assistance.
• CAUTION: The Blade is sharp. Handle with care when assembling and cleaning.
• The use of attachments not recommended or sold by Chefman may cause fire, electric
shock or injury.
• CAUTION: Never feed food into the Chute by hand; always use the Food Pusher.
• Keep fingers, hair, clothing and utensils away from moving parts during operation to reduce
the risk of personal injury and/or damage to the Meat Grinder.
• Avoid contact with moving parts.
• Never put your fingers near the inside of the Chute while the Meat Grinder is in use.
• Do NOT use your fingers to scrape away ground meat from where it emerges while the
Meat Grinder is plugged in. Laceration may result.

14 15
SAFETY INSTRUCTIONS
IMPORTANT SAFEGUARDS
SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the hazards of entanglement or tripping
over a longer cord. Longer detachable power-supply cords or extension cords are available
and may be used if care is exercised in their use. If a longer detachable power-supply
extension cord is used:
1. The marked electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance.
2. The cord should be arranged so that it will not drape over the countertop or tabletop
where it can be pulled on by children or tripped over unintentionally.
POWER CORD SAFETY TIPS
1. Never pull or yank on cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found,
this indicates that the appliance should be serviced, and the power cord replaced. Please
contact Chefman Customer Support for assistance.
5. Never wrap the cord tightly around the appliance, as this could place undue stress on the
cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
Do not place the appliance on a
stovetop or any other heatable
surface.
SAFETY INSTRUCTIONS
IMPORTANT SAFEGUARDS
• Do NOT leave the Meat Grinder unattended while it is running.
• Do NOT run the Meat Grinder continuously for longer than 10 minutes at a time. Allow at
least 30 seconds to 1 minute for the appliance’s motor to cool before grinding again.
• Never tug at the Power Cord. Insert the plug by grasping it firmly and guiding it into a
grounded electrical outlet. Disconnect by grasping the plug and removing it from the
grounded electrical outlet.
• Unplug the Meat Grinder from outlet when not in use, before putting on or taking off parts
and before cleaning.
• Never use abrasive cleaning agents or abrasive cloths when cleaning the Meat Grinder.
• To protect against risk of electrical shock, do NOT put this Meat Grinder in water or any
other liquids.
• Do not attempt to replace parts or repair this Meat Grinder by yourself.
SAVE THESE INSTRUCTIONS.

16 17
OPERATING INSTRUCTIONS
FEATURES
BEFORE FIRST USE
1. Make sure all to check all of the packaging to ensure that all parts have been safely
removed and unpacked.
2. Unbox and remove all packing materials from the inside and outside of the Meat Grinder.
3. Refer to the Features section on page 4 to make sure you have all parts and attachments.
4. Use a sponge and warm, soapy water to wash the Loading Tray, Food Pusher, Chute, Auger,
Blade, Grinding Plates and Sausage and Kibbeh Attachments (everything but the Main Body).
Dry thoroughly. Do NOT use abrasive cleaning agents or scouring pads when cleaning.
5. Before plugging in the Meat Grinder, check that both switches are both turned to “Off.”
6. Read all instructions and follow them carefully.
Reminder: Use caution when handling raw meat. Ensure that it is fresh and properly stored,
before and after grinding. Always wash and dry all parts of the Meat Grinder thoroughly after
every use.
HOW TO USE
1. Cut meat into 1-inch to 2-inch cubes. Chill until firm.
2. Place the Meat Grinder on a flat, sturdy surface and ensure it’s not close to the edge of a table
or countertop where it can be pushed off or fall. Allow for enough space around the Meat
Grinder to avoid sources of heat and water. Since raw meat will be used, create a designated
workspace to avoid cross-contamination.
3. Hold the Main Body steady with one hand.
4. Insert the back of the Chute into the Inlet with the narrower tube facing up. Make sure the
top and bottom rivets fit into the matching divots of the Inlet. (Refer to Figure 1 on next page
for correct assembly.) Twist the Knob to secure the Chute in place.
5. Insert the non-spiral end of the Auger into the Chute ensuring that the hexagonal end fits into
the hexagonal hole in the Inlet. Note: The Auger should stay in place but will be slightly loose
until the rest of the attachments are secured.
1
2
13 14 17
18
15
16
19
19
20 21 22
3
7
9
8
10 11
12
5
4
6
1. Main Body
2. Inlet
3. Knob
4. Back On/Off/Reverse Switch
5. Side Reverse/On Switch
6. Power Cord
7. Chute
8. Collection Tray/Storage Lid
9. Loading Tray
10. Blade
11. Fastening Ring
12. Auger
13. Food Pusher
14. Stainless Steel Grinding Plate- 3mm holes
15. Stainless Steel Grinding Plate- 5mm holes
16. Stainless Steel Grinding Plate- 8mm holes
17. Round Sausage Attachment (Black)
18. Sausage Stuffing Plate (White)
19. Kibbeh Attachments (Black)
20. Small Sausage Stuffing Funnel- 12mm
21. Medium Sausage Stuffing Funnel- 16mm
22. Large Sausage Stuffing Funnel- 20mm

18 19
6. Once the Auger is secure, place the Blade onto the Auger’s pin. Ensure that the curved,
smooth side is facing in and the raised sides are facing out towards you. Caution: This
Blade has sharp points and edges. (Refer to Figure 1 on next page for correct assembly.)
7. Select the appropriate Grinding Plate.
• Meat Grinding Plates Breakdown:
• 3mm- Fine--for cooked meats, pâté, bread crumbs, bologna, hot dogs and jerky.
• 5mm- Medium--for coarse raw or cooked meats, hamburgers, meatballs, meatloaf and
breakfast, Polish or German sausages.
• 8mm- Coarse--good to use for chili, chorizo and chunky ground meat.
8. Place the desired Grinding Plate on the pin in front of the Blade. Ensure the rivets on the
Grinding Plate fit into the Chute’s divots. (Refer to Figure 1 for correct assembly.)
9. Hold the Grinding Plate in place
and attach the Fastening Ring
over it. Turn the Fastening Ring
clockwise to secure.
10. Place the Loading Tray on top of
the Chute.
11. Position the Collection Tray or a
bowl or dish in front of the Meat
Grinder to catch the ground meat
as it exits the grinder.
12. Make sure that both switches are
turned to “Off.” Then, plug in the
Meat Grinder.
13. Load cut and chilled meat cubes
into the Loading Tray.
14. Switch the Back switch to “On”
and then, when ready to grind,
switch the Side switch to “On.”.
15. Use the Food Pusher to gently push meat into the Chute through the hole on the Loading
Tray. Note: Do NOT use the Food Pusher to forcefully push meat through the Chute. This
will jam the Meat Grinder.
16. If meat is jammed or grinding significantly slows down, use the Reverse function.
• Turn both switches to “Off,” then wait 30 seconds. Then turn the Back switch to
“Reverse,” and then the side switch to “Reverse.” Pieces that are jammed will reverse
out back into the Chute.
17. Allow the Meat Grinder to grind for at least an additional 30 seconds to 1 minute after the
last piece of meat has been grinded. This will ensure all meat has been grinded and helps
protect the motor.
18. Switch the Meat Grinder off using both switches.
HOW TO MAKE SAUSAGE:
1. Grind chilled meat cubes using the the desired Grinding Plate. For chunkier sausage such
as chorizo, use the Coarse plate.
2. Grind for a second time into the casing by following the below instructions.
• In order to use casings with the Meat Grinder, insert the Auger, Blade, desired Sausage
Funnel and Round Sausage Attachment into the fastened Chute in this specific order.
Secure with the Ring.
• Rub vegetable oil or shortening onto the Sausage Funnel Attachment so that casing
does not rip or stick to the funnel.
• Slide the casings over the funnel. Pin-prick the casings with a knife to create tiny holes
to avoid air bubbles. If necessary, knot the end of the casing.
• Load cut and chilled meat into the Loading Tray.
• Position the Collection Tray or a bowl or dish in front of the Meat Grinder to catch the
ground meat as it grinds through.
• Make sure that both switches are turned to “Off.” Then, plug in the Meat Grinder.
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

20 21
• Place hand by casing and funnel to catch and guide sausage as it forms.
• Switch dual switches to “On” to begin grinding and making sausage.
• Create separate sausage links by using both hands and twisting sides in opposite
directions. Repeat with each section.
HOW TO MAKE KIBBEH:
Kibbeh is a popular Middle Eastern stuffed sausage made with ground meat, seasonings and
bulgur. The Kibbeh Attachments may be used to make the hollow “meat dough” that will later
be stuffed and cooked.
1. Cut meat into 1-inch to 2-inch cubes. Chill until firm.
2. Grind meat twice using the coarsest Grinding Plate (8mm). Follow Operating Instructions
on page 5.
3. To make the meat mixture for kibbeh, combine the ground meat with soaked and rinsed
bulgur. (A good ratio is 1 ½ lbs ground meat with 1 ½ cups bulgur). Chill mixture for about
30 minutes.
4. When ready to make kibbeh, remove the Blade and Grinding Plate from the Meat Grinder
after initial grinding. Attach the Kibbeh attachment and secure with the Fastening Ring.
5. Fill Loading Tray with chilled, ground meat and bulgur mixture and use the Food Pusher
to load meat down into the Chute. Turn the Meat Grinder on using both switches.
6. The ground mixture will emerge out of the Kibbeh Attachment in a hollow tube shape.
Use one hand to steadily guide it out so the meat tube does not collapse or break.
7. Cut tube into desired length and stuff with desired filling. After stuffing, gently pinch both
sides to seal.
Note: Because raw meat is used in this appliance, it is very important to follow proper food
safety and ensure appliance is fully cleaned after each use.
1. Disassemble all parts and attachments from the motorized Main Body.
2. Wipe Main Body with a damp cloth. DO NOT USE ABRASIVE MATERIALS.
3. Clean out the Chute and the Grinding Plates with a bottle brush and warm, soapy water
to remove excess bits of meat out of holes.
4. Wipe Main Body with a damp cloth. Wash all parts of the Meat Grinder except for the
Main Body in warm, soapy water. The sausage and kibbeh attachments, Food Pusher and
Collection Tray are dishwasher safe.
Note: Bleach cleaning solutions containing chlorine will discolor surfaces of the Meat
Grinder.
5. Dry all parts by wiping down with a dry towel. Lay flat on a fresh towel or wire rack to air-
dry any remaining moisture. To avoid rust and oxidation, ensure all parts are completely
dry before storing.
6. (Optional) After fully towel or air-drying, put the Blade, Grinding Plates, Auger and
Fastening Ring in the oven at 170°F for 10-15 minutes to completely remove any moisture.
Note: Cleaning solutions containing chlorine will discolor surfaces.
7. After drying, wipe all cutting parts that were in the Chute (Blade, Grinding Plates, Auger)
with vegetable oil or a food-grade silicone or mineral oil spray to lubricate and prevent
rust. This is especially important if the Meat Grinder pieces and attachments will be stored
in a high-humidity area.
8. Bag dry metal parts individually in a sealable bag with a handful of rice. Then store in
freezer, if possible, or a dry place.
9. If you do not want to freeze parts, place parts in the Collection Tray and cover with the
Loading Tray as a storage container.
10. Do NOT store in a high-moisture environment.
CLEANING AND MAINTENANCEOPERATING INSTRUCTIONS

22 23
TROUBLESHOOTING COOKING TIPS
TYPES OF SAUSAGE CASINGS:
Sausage casings come in many shapes and sizes. Some are synthetic, others are natural. Below is a
breakdown of the most commonly used casings and how to use them. Casings can be purchased
at stores, local farmers’ markets, online or at local specialty butcher shops.
Collagen Casings- Natural product made from beef protein; come in edible and non-edible forms.
Variations include:
• Fresh Casings, most tender.
• Commonly used for brats and breakfast sausages.
• No soaking needed; can use right out of the package.
• Best Cooked: Broiled, grilled or fried.
• Smoked/Processed Casings, second most tender.
• Commonly used for hot dogs, smoked and cured bratwurst.
• No soaking needed; can use right out of the package.
• Best Cooked: These casings are made stronger to be hung in a smoker but can be
cooked in an oven or dehydrator.
• Snack Stick Casings, least tender.
• Used for snack sticks, jerky and breakfast sausages.
• No soaking needed; can use right out of the package.
• Best Cooked: These are also made stronger to be hung in a smoker but can be
cooked in oven.
Old Fashioned Collagen Middles (Non-Edible)- Made of beef protein; eliminates the loose,
wrinkled look you get with fibrous casings. These casings usually come string tied.
Variations include:
• Collagen Rounds
• Commonly used for summer sausages.
• Soak in non-iodized salted water for 3 to 5 minutes before using.
• Best Cooked: In a smoker, or cooked in an oven until the internal temperature
reaches 165°F.
• Shrinks with the meat to prevent wrinkling.
• These casings will curve when stuffed.
• Since casings are not edible, peel off casings after cooking and before consuming.
Problem Cause Solution
The Meat Grinder is not turning on. 1. There could be possible damage
to the Power Cord, or the outlet is
not working.
2. Back Switch or Side Switch is
not on.
1. Check to see if there is any visible
damage to the Power Cord. If there is,
do not operate the Meat Grinder. Instead,
contact Chefman Customer Service at
888-315-6553 or email customerservice@
chefman.com.
2. Check that the Back and Side Switches
are turned on.
The Chute is jammed. 1. Warm fat can sometimes cause
the Chute to jam.
2. Pieces that are loosely assembled
onto the Meat Grinder will cause
meat to get caught and clog the
grinder.
1. Use the Reverse function on the switch
to release anything that may be jamming
the Chute. Refer to step 16 in Operating
instructions on page 6 for directions.
2. Fully turn off and unplug the grinder.
Check that all parts are tightly assembled.
Kibbeh is not forming properly. A not-quite-ground piece of meat
is stuck, causing ground kibbeh
meat to emerge only partially.
Kibbeh mixture may also not be
chilled enough or mixed with
enough bulgur.
Turn off and unplug the Meat Grinder and
check the Chute for stuck pieces.
My sausages have air bubbles. Sausage casings were not pricked
to create small holes before
stuffing.
Use the tip of your knife to carefully create
tiny holes in casings; these holes will allow
air to escape as the casings are filled.
The meat is not coming out in a
consistent texture.
The Blade could be assembled
backwards.
Turn off and unplug Meat Grinder.
Disassemble and turn Blade around. The
curved, smooth side should face away from
you towards the Auger.

24
COOKING TIPS
Natural Casings- Made from sheep, hog and cow intestines. These casings come in a
salted brine and need to be soaked at least 1 hour in clear, warm water. Change the water
regularly while the casings are soaking. Soaking will make these casings more pliable to
use with the Meat Grinder. After soaking, open casings and rinse with water to remove salt.
Then refrigerate in a sealed air-tight container. Refrigeration will help eliminate the odor
that naturally comes from these fresh casings.
Note: Natural casings will stay fresh on the shelf and in the refrigerator for at least 1 year so
long as they are kept in brine in an airtight bag or container. Variations include:
• Natural Hog Casings
• Used for brats, franks or melts.
• Soak at least 1 hour in clear, warm water, changing water regularly.
• Best Cooked: Broiled, grilled or fried.
• Natural Sheep Casings
• Used for snack sticks and breakfast sausage links.
• Soak at least 1 hour in clear, warm water, changing water regularly.
• Best Cooked: Baked, smoked or broiled.
• High Barrier Casings- Leak-proof casings made of a nylon/poly blend. Great for beginner
sausage-makers. These casings are impermeable so liquid cannot escape.
• Used for summer sausages, bolognas and salamis.
• Soak for 30-60 minutes in cold water prior to use.
• Best Cooked: In a smoker, oven or cooked in water until the internal temperature
reaches 165°F.
• Hot Dog Casings- Made from collagen or non-edible plastic. Used to make good old-
fashioned franks.
• Used for franks.
• No soaking needed; can use right out of package
• Cooked Best: Boiled or smoked until internal temperature reaches 165°F.
• Do NOT use in an oven.

25 26
Our products are backed by a limited 1-year warranty. To register, follow the instructions on the Chefman®
Warranty Registration page in this User Guide.
We offer a limited 1-year warranty from the date of purchase. This warranty is void without proof of purchase
within the USA, Canada or Mexico. Service centers and retail stores do not have the right to alter or change
the Terms & Conditions of this warranty.
WHAT THE WARRANTY COVERS
• Manufacturer Defects
Chefman® products are warranted against defects in material and workmanship for a period of 1 year from
the date of purchase, when used in accordance with the Chefman® User Guide.
• Qualified Replacements
If your product does not work as it should, we will send you a new one. If the product is no longer available,
we will replace it with an identical product or one that is comparable.
THIS WARRANTY DOES NOT COVER
• Misuse - Damage that occurs from neglectful or improper use of products; damage that occurs as a result of
usage with incompatible voltage. See Safety Instructions for information on proper use.
• Poor Maintenance - General lack of proper care. See Cleaning & Maintenance Instructions for information on
proper maintenance.
• Commercial Use - Damage that occurs from commercial use.
• Altered Products - Damage that occurs from alterations or modifications by any entity other than
Chefman®; removal of rating label.
• Catastrophic Events - Damage that occurs from fire, floods or natural disasters.
• Loss of Interest - Claims of loss of interest or enjoyment.
Register your product to extend your warranty for 3 months.
What do I need to register my product?
•Contact Information
•Model Number
•Proof of Purchase
(i.e. online confirmation, receipt, gift receipt)
•Date code
How do I register my product?
We offer 2 convenient ways to access the Chefman® registration form:
1. Visit chefman.com/register.
2. Scan the QR code below to access the form:
Have a question?
Please reach out to us at Chefman.com/contact.
Need more help?
We’re here for you! Contact us at cust[email protected] or 888.315.6553 Monday-Friday.
OTHER LIMITATIONS: ALL WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS, IMPLIED AND STATUTORY, ARE HEREBY DISCLAIMED. ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED, PROVIDED THAT IF ANY IMPLIED
WARRANTIES OF ANY KIND IS REQUIRED BY ANY JURISDICTION, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, THE
DURATION OF SUCH IMPOSED IMPLIED WARRANTY IS LIMITED TO ONE (1) YEAR. THIS WARRANTY DOES NOT COVER, AND CHEFMAN® SHALL NOT BE
LIABLE, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, DAMAGE TO, OR LOSS OF USE OF THE
PRODUCT, OR LOST SALES OR PROFITS OR DELAY OR FAILURE TO PREFORM THIS WARRANTY OBLIGATION. THE REMEDIES PROVIDED HEREIN ARE THE
EXCLUSIVE REMEDIES UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT OR OTHERWISE.
This Warranty gives you specific legal rights, and you may also have other rights that vary from state to state or Province to Province. Some states or Provinces do not
allow the exclusions or limitations set forth in this Warranty, so the above limitations or exclusions may not apply to you depending on the jurisdiction of purchase.
Chefman® is a registered trademark of RJ BRANDS, LLC. ETLCM is a registered certification mark of Intertek Testing Services NA, Inc.
TERMS & CONDITIONS
Limited Warranty
CHEFMAN® WARRANTY REGISTRATION
MADE IN CHINA/FABRIQUE EN CHINE
AC ONLY/ AC SEULEMENT
DATE CODE:
ACCESS CODE:
Model/Modele: RJ25-C
Conveyor toaer
120v~60hz 1800W
CONFORMS TO UL STD. 1026
CERTIFIED TO CSA STD.C22.2 No.64
CAUTION: DO NOT IMMERSE IN WATER
ATTENTION: NE PAS PLONGER DANS L’EAU
WARNING: TO PREVENT ELECTRIC SHOCK,
UNPLUG BEFORE CLEANING
PRÉAVIS: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
DÉBRANCHEZ L’APPAREIL AVANT DE L’UTILISER
READ INSTRUCTIONS BEFORE USING
LISEZ LES INSTRUCTIONS AVANT DE L’UTILISER
HOUSEHOLD USE ONLY
POUR USAGE DOMESTIQUE SEULEMENT
0000000
0000
XXXXXXXX

27
®
CHEFMAN.COM | @MYCHEFMAN
©CHEFMAN 2019