Cheminees Philippe RADIANTE 800 User manual

RAD ANTE 800 STANDARD NSTALLAT ON
LEGEND
Firebox Dimension
Exact Dimension
Minimum Dimension
Air ntake
Air Outlet
F REPLACE
CONSTRUCT ON STEP 1
F REPLACE
CONSTRUCT ON STEP 2
SECT ON ‘A’
A
500
820
445
600
Flue
Lintel
Firebox
Air Grille
Firerock nsulation
Hearth Fireplace base
500
1800
See note [3]
50
850 840
To ceiling height
Cutaway
showing
lintel
840
200
Air intake
grille
Air intake
grille
Air grilles to be
either large front
as shown, or sides
x2 (dotted).
Air intake grilles
600
50
600
IMPORTANT:
NO BRICKWORK TO
BE COMMENCED
UNTIL FIREBOX IS
PLACED IN POSITION
NOTES:
[1] Air intake grilles minimum air flow area required
= 180cm2each side.
[2] Air outlet grilles minimum air flow area = 240cm2each side
and 480cm2if one grille is used.
[3] Hearth height dimensions optional (Refer to Technical Data
& nstallation nstructions)
[4] All dimensions in millimetres.
[5] Heater can be left freestanding.
[6] Do not scale from these diagrams
[7] Air transfer kits mandatory for exempt units to comply to
AS/NZ 4012/4013:2014. Fan optional depending
on duct length. ( Refer to Technical Data & nstallation
nstructions )
August 2018
Cheminees Philippe’s policy is one of continuous development. We reserve the right to change sizes and specifications without notice.
430 Johnston St., Abbotsford, Victoria 3067 Phone: [phone]
e-mail: [email protected] www.chemphilaust.com.au
Air Transfer Kit
Ceiling
Brick Masonry
OR
50mm Skamotec 225
*
*
*
*
= 30mm air gap
to combustibles
w en using
Skamotec

OPT ONAL NSTALLAT ON 1
980
820
445
RAD ANTE 800
LEGEND
Firebox Dimension
Exact Dimension
Minimum Dimension
Air ntake
Air Outlet
F REPLACE
CONSTRUCT ON STEP 1
F REPLACE
CONSTRUCT ON STEP 2
Flue
Lintel
Firebox
Air Grille
Firerock nsulation
Hearth Fireplace base
500
1800
See note [3]
SECT ON ‘A’
A
500
600
50
980
840
980
70
70 200
Optional
Mesh vents
To ceiling height
Cutaway
showing
lintel
Air grilles to be
either large front
as shown, or sides
x2 (dotted).
Optional
Mesh vents
600
50
600
IMPORTANT:
NO BRICKWORK TO
BE COMMENCED
UNTIL FIREBOX IS
PLACED IN POSITION
NOTES:
[1] Air intake grilles minimum air flow area required
= 180cm2each side.
[2] Air outlet grilles minimum air flow area = 240cm2each side
and 480cm2if one grille is used.
[3] Hearth height dimensions optional (Refer to Technical Data
& nstallation nstructions)
[4] All dimensions in millimetres.
[5] Heater can be left freestanding.
[6] Do not scale from these diagrams
[7] Air transfer kits mandatory for exempt units to comply to
AS/NZ 4012/4013:2014. Fan optional depending
on duct length. ( Refer to Technical Data & nstallation
nstructions )
August 2018
Cheminees Philippe’s policy is one of continuous development. We reserve the right to change sizes and specifications without notice.
430 Johnston St., Abbotsford, Victoria 3067 Phone: [phone]
e-mail: [email protected] www.chemphilaust.com.au
Air Transfer Kit
Ceiling
Brick Masonry
OR
50mm Skamotec 225
*
*
*
*
= 30mm air gap
to combustibles
wen using
Skamotec