Chicago Electric 95000 Parts list manual

SOLAR CHARGER 12V-18V
Model 95000
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright©2006 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
Fortechnicalquestionsorreplacementparts,pleasecall1-800-444-3353.

Page 2SKU 95000 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Features
Solar Panels in a Portable Folding Design
For Charging 12V through 18V Batteries, Charging Indicator LED,
Blocking Diode to Prevent Draining, Four Different Adaptors
Overall Dimensions 26 1/2” L X 20 1/2” W x 3/4” T (open position)
Output
400 mA Maximum
~24 V Direct Sunlight, ~17.5 V Indirect Sunlight
Power Cord 10 ft. Length, Two Way Insulated Plug
Weight 9.7 lb.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric
shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. Cluttered areas invite accidents.
Keep bystanders, children, and visitors away while operating this product. This
product is not a toy.
Stay alert. Watch what you are doing, and use common sense when operating
this product. Do not set up this product while tired or under the influence of
drugs, alcohol, or medication.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of this product in unexpected situations.
Use the correct charger for your application. Do not use the charger for a purpose
for which it is not intended.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one charger may become hazardous
when used on another charger.
1.
2.
3.
4.
5.
6.

Page 3SKU 95000 For technical questions, please call 1-800-444-3353.
Charger service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
Follow instructions in the “Inspection, Maintenance, And Cleaning” section of
this manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of property damage or injury.
Maintain labels and nameplates on the charger. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Do not use this product in a damp or wet
location.
Follow all safety precautions provided with the battery you will charge. Lead-
acid batteries are especially dangerous and caution must be exercised.
Lead-acid batteries generate hydrogen gas during normal operation, and even
more gas is generated when the battery is charging. Hydrogen gas is explosive
and highly flammable. Never smoke near a charging battery.
Do not attempt to start a vehicle with Charger connected to its battery.
If battery acid comes in contact with skin, wash with soap and water and apply
water and baking soda to the site. If the fluid comes into contact with eyes, flush
with water for several minutes and contact a physician immediately.
Do not attempt to charge a leaking battery.
CAUTION: To Prevent Property Damage
The Solar Charger is fragile. Be careful, after opening up and positioning the support
legs, that the Solar Charger is on a level surface and will not fall over.
Keep the Solar Charger free of dirt, dust and grime. Dust covering the Solar
Charger will block out sunlight causing a decrease or stoppage of efficiency in re-
charging the batteries.
Only use this Charger with charging bases from Harbor Freight Tools that ac-
cept a 5.5 x 2.1 mm plug and are from 12 V – 18 V. Do not use on another brand,
another voltage, or a charging base designed for a different plug.
Do not hook up more than one solar charger in series.
Do not short circuit the positive to the negative.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
7.
8.
9.
10.
11.
a.
b.
c.
d.
1.
2.
3.
4.
5.

Page 4SKU 95000 For technical questions, please call 1-800-444-3353.
OPERATION
Figure 1
Leg
Solar Charger (1)
Unfold the Solar Charger. Open the “support legs” on the backs. See Figure 1.
Place the Charger in a position that can receives direct sunlight without shade. Turn
the Solar Charger toward the sun. The blue LED will go on (or flash) whenever the
Solar Charger is generating electricity. A blocking Diode in the Solar Charger helps
to ensure that it will not drain your battery. If the weather is cloudy or if the charger
is even partially shaded, the output will be drastically reduced.
Charging Base
Adapter (2)
Alligator Clamp
Adapter (3)
Cigarette Lighter
Receptacle
Adapter (4)
Cigarette
Lighter Plug
Adapter (5)
Figure 2
Identify the Adapter charger connection you need. See Figure 2.
Plug the adaptor to the Power Cord on the Solar Charger.
Connect the correct Adapter (2 through 5) to the device you are powering.
1.
2.
3.
4.
5.

Page 5SKU 95000 For technical questions, please call 1-800-444-3353.
See below for charging function instructions:
Charging Base Adapter:
Refer to the manual that comes with the charging base. The charging time will
be altered substantially–the Solar Charger must receive at least four hours direct
sunlight to fully charge a battery. Different batteries will have different capacities
and may require different charging times. Periodically check on the charger.
Alligator Clamp Adapter:
Connect cables to the 12V lead-acid car battery in a well-ventilated area outside
the vehicle. Periodically remove the cables and check the battery’s voltage. Once
the battery’s voltage reaches 13-1/2 V it is completely charged.
Cigarette Lighter Receptacle Adapter:
This item can be used to power certain accessories that use 12 V nominal input
from a cigarette lighter-style plug. Do not use this item to power sensitive elec-
tronics.
Cigarette Lighter Plug Adapter:
This item can be used to provide a trickle or maintenance charge to a car’s battery
through the car’s cigarette lighter receptacle. The vehicle’s ignition may need to
be in the accessory position to permit the connection.
Disconnect charger, fold, and store after use.
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! BEFORE EACH USE, inspect the general condition of the tool. Check
for loose screws, misalignment or binding of moving parts, cracked or broken parts,
damaged electrical wiring, and any other condition that may affect its safe operation.
If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
Disposing of solar panels should comply with the standards for waste disposal in your
community. Contact your local city government office for the nearest waste disposal
area in your community.
6.
2)
3)
4)
5)
7.
1.
2.

Page 6SKU 95000 For technical questions, please call 1-800-444-3353.
PARTS LIST
Part Description Q’ty
1 Solar Charger w/Power Cord 1
2 Charging Base Adapter 1
3 Alligator Clamp Adapter 1
4 Cigarette Lighter Receptacle Adapter 1
5 Cigarette Lighter Plug Adapter 1
(1)
(2)
(3)
(4)
(5)
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
Charging Base not shown.