Child Craft Lucas F36701 User manual

1
AB20258C
AB20258_G1
Assembled as Crib
AB20258_G2
Assembled as Toddler Bed
Foundations Worldwide, Inc.
5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: [phone]
www.childcraftbaby.com
Lucas™4-in-1 Convertible Crib
ASSEMBLY ASSISTANCE
IMPORTANT: Retain for future reference and
read carefully.
Foundations strives for the highest quality in our
products but occasionally a missing part or problem
can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.childcraftbaby.com or call Foundations
for assistance at 1-877-716-2757 (U.S. Only) or
1-330-722-5033 (Monday through Friday, 9:00
a.m.– 4:00 p.m. Eastern Time). Please have the
model number and manufacture date available
when you call or write us at:
Foundations, 5216 Portside Dr., Medina, OH 44256
KEEP INSTRUCTIONS FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-877-716-2757
(outside of U.S. 330-722-5033). DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY STANDARD
COMPLIANCE CERTIFICATES, PLEASE VISIT OUR
WEBSITE AT
www.childcraftbaby.com
Record the information for your product here:
Model number:
Manufacture date:
PO number:
Model Covered: F36701
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including polybag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS
THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

2
A. Headboard Assembly
B. Short Foot Assembly
C. Long Foot Assembly
D. Short Head Assembly
E. Stretcher
F. Spring
G. Allen Head Bolt 6mm x 60mm
H. Allen Head Bolt 6mm x 45mm
I. Allen Head Bolt 6mm x 25mm
J. Allen Head Bolt 6mm x 20mm
K. Joint Connector Nut
L. Connector Nut
M. Allen Wrench
N. Guard Rail Extension - Left
P. Guard Rail Extension- Right
Hardware Package
G
H
IJ
KL
M
AB20258_G4
Crib Parts
PARTS LIST BASIC CRIB
Part Description Part Number Quantity
22302598
22302587
22302582
22302588
22302597
11200624
11200326
11200373
11200327
11200384
11200330
11200331
11200070
22302604
22302605
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct Crib on an even at oor.
Note: during the assembly process whenever
using screws or bolts, check each with the parts list
by letter and size identication. Place each screw
or bolt on the diagram of the item which is sketched
actual size. Be sure to use the proper size specied
in the assembly directions. If any parts are missing
or broken or you need assistance with assembly
DO NOT return your product to the dealer.
Please identify the crib by the model number
identication stamped on the inside face of the Foot
and Head Assembly when you call or write to
Foundations. Make note of all identification numbers
and include this information with your request.
The Allen Head Bolts (I and J) have a friction
enhancing patch on the thread which may cause
resistance during tightening.
DO NOT Substitute Parts!
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
AB20258_G3
AB
CD
E
FN
P
1
1
1
1
1
1
12
8
8
12
4
16
2
1
1

3
STEP 1
AB20258_G5
AD
J
H
JL
STEP 2
AB20258_G6
A
J
H
L
B
J

4
STEP 3
AB20258_G7
E
G x 4
K x 4
STEP 4
AB20258_G8
H x 4
C

5
AB20258_G9
J
F
L x 4 1
2
STEP 5

6
WARNING
WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a
small child. NEVER use bed with children younger than 15 months. ALWAYS follow
assembly instructions.
WARNING:STRANGULATION HAZARD: NEVER place bed near windows
where cords from blinds or drapes may strangle a child. NEVER suspend strings
over bed. NEVER place items with a string, cord or ribbon, such as hood strings or
pacifier cords, around a child’s neck. These items may catch on bed parts.
CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310
mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
•This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Foundations® for assistance. Refer to maintenance section for contact
information.
WARNING
WARNING
WARNING
WARNINGS (For Toddler Bed)
Finishing Touches
Place a purchased full sized mattress on the spring.
After completing the crib assembly, and after
making yourself aware of WARNINGS, CAUTIONS,
CLEANING,STORAGE,USE and MAINTENANCE
of crib on pages 9 and 10, store the assembly
directions in the pouch which was pre-attached to
the spring. For future referral to assembly directions
you will only need to remove them from the pouch.
We caution you not to store excess hardware in
pouch as this would be a danger to child if retrieved
by him/her.

7
Toddler Bed 1
AB20258_G10
H x 4
C
Toddler Bed 2
AB20258_G11
I x 4
L x 4

8
Guard Rail Option Step 2
AB20258_GGR
X
G
G
P
N
I
Mounting hardware (X) provided with Guard Rail Kit. Refer to Guard Rail instructions
Guard Rail Option Step 1
AB20258_G10
H x 4
C

9
Full Size Bed Conguration
Guard Rail and Full Bed Options are complete kits that can be purchased separately
from your Child Craft dealer.
AB20258_GFB
G
G

10
Maintenance Cleaning and Storage
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and
secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after
assembly and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need assistance DO NOT return crib to your dealer.
Call Foundations at 330.722.5033 and include model identication numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly
dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a
soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s
skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne
furniture.
STORAGE:
When storing crib use caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away
from any wood furniture item.
After completing the assembly the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND, MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the
crib spring for the permanent storage of the assembly directions. Please place the complete set of
assembly directions into the pouch for future referral. We caution the user to not place excess
hardware in the pouches as it could present danger to the child if retrieved.
CAUTION
•ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST
27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING
6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A
TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN.
(100 MM ) THICK.
• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND
FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK
SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND
TIGHTEN IF NEEDED.