Childcare 043050 User manual

BOOSTER SEAT
Model # 043050
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
IM_Booster Seat_043050-272.indd 1 28/02/2013 09:27:03

Read all instructions before assembly and use of the booster seat. Keep
instructions for future use.
Safety Precautions
PREVENT SERIOUS INJURY OR DEATH. DO NOT USE IN
MOTOR VEHICLES.
PREVENT SERIOUS INJURY OR DEATH FROM SLIDING OUT,
FALLS, OR TIPPING OVER.
ALWAYS SECURE CHILD IN THE RESTRAINT UNTIL CHILD IS
ABLE TO GET IN AND OUT OF THE BOOSTER SEAT WITHOUT
HELP (ABOUT 2 ½ YEARS OLD).
NEVER LEAVE CHILD UNATTENDED.
NEVER ALLOW A CHILD TO PUSH AWAY FROM THE TABLE.
THIS BOOSTER IS DESIGNED FOR USE WITH ADULT-SIZED
CHAIRS ONLY.
ALWAYS SECURE BOTH SEAT AND BACK CHAIR STRAPS.
ALWAYS CHECK SECURITY OF FIT TO ADULT CHAIR BEFORE
EACH USE AND ANY LIMITATIONS OF THE PRODUCT.
THIS PRODUCT IS TO BE USED ONLY AS A BOOSTER SEAT.
DO NOT USE AS A CAR SEAT, STEP STOOL, BATH SEAT OR
ANY OTHER PURPOSE.
THE CHILD SHOULD BE SECURED IN THE BOOSTER SEAT AT
ALL TIMES BY THE RESTRAINING SYSTEM. THE TRAY IS NOT
DESIGNED TO HOLD THE CHILD IN THE CHAIR.
IT IS RECOMMENDED THAT THE BOOSTER SEAT BE USED IN
THE UPRIGHT POSITION ONLY BY CHILDREN CAPABLE OF
SITTING UPRIGHT UNASSISTED.
WARNING
Always keep child in view while in booster seat.
Not recommended for a child under 6mths old.
Use body harness at all times.
Always secure your child in the restraint. Ensure that your child wears a correctly tted and adjusted harness at
all times.
Do not carry the booster seat with a child in it.
To reduce the risk of injury, position the booster seat away from furniture, walls, hot surfaces and liquids, window
covering cords, and electrical cords.
Periodically check that all parts of the booster seat are in good working order.
Do not use the booster seat if it is damaged or broken, contact CNP Brands for repair advice.
The weight of the child using this booster seat should not exceed 28kgs.
Promptly replace worn out or broken parts.
IM_Booster Seat_043050-272.indd 2 28/02/2013 09:27:03

3
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Contents list
Operating instructions
How to care for your Childcare Booster Seat
Congratulations on your purchase of the
Childcare Booster Seat.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
IM_Booster Seat_043050-272.indd 3 28/02/2013 09:27:03

4
x1
x1
x1
Contents
Check what you have received...
You have received 1 pre-assembled booster seat. Please check the contents of the
booster seat against the list below. If anything is missing, please contact Customer
Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Supplied pre-assembled in box:
Booster Seat with body harness
Tray
Sub-tray
IM_Booster Seat_043050-272.indd 4 28/02/2013 09:27:04

5
Assembly/Operating Instructions
Height Adjustment
PLEASE NOTE: Height adjustment must be made prior to fastening
booster seat to chair.
1. Turn booster seat upside down.
2. Squeeze grey quick release levers together and pull upwards to
desired height position. Release levers.
Fastening Booster Seat to Chair
1. Place booster seat on adult-sized chair.
2. Wrap the booster seat backrest restraint straps around backrest
of chair and engage buckle. Ensure length of the straps are
altered so they are tight and rm around the backrest of the
chair.
3. Wrap the booster seat base restraint straps around the seat of
the chair and engage buckle. Ensure length of the straps are
altered so they are tight and rm around the seat of the chair.
Tray assembly/adjustment
1. To attach tray; line up the sides of the tray with the grooves on
each side of the booster seat and slide towards the backrest
of the seat. The tray locking buttons on the each side of the
booster seat will ‘click’ and release into place.
2. To adjust tray; simultaneously push in both locking buttons and
slide to next position. Locking buttons will ‘click’ and release
into place.
IM_Booster Seat_043050-272.indd 5 28/02/2013 09:27:05

6
Potable/Travel Mode
PLEASE NOTE: Tray must be removed in order to convert booster
seat to portable/travel mode.
Reclining the backrest
1. Push down both backrest locking buttons located on the lower
back side of the backrest and pull backwards until backrest
clicks into reclined position.
1. Push down both backrest locking
buttons located on the lower back
of the backrest and push forwards
until backrest folds and ‘clicks’
into position.
Assembly/Operating Instructions
Restraints - Harness
1. To secure the child in the harness, insert left buckle (a) into
housing buckle (c) until it snaps into position.
2. Repeat previous step for right buckle (b).
3. Once all attached, carefully adjust the harness straps by pulling
each slider (d) until the desired t is achieved.
4. To release the buckles, squeeze the top and bottom buckles (a)
and (b) together until harness disengages.
Removing Tray
1. Simultaneously push in both locking buttons located on each
side of the tray and pull forwards until tray is removed.
(a)
(c)
(d)
(d)
(d)
(b)
IM_Booster Seat_043050-272.indd 6 28/02/2013 09:27:07

7
Assembly/Operating Instructions
1. Push down both white buttons located on the lower back of the
backrest and push forwards until backrest folds forwards and
clicks into position.
2. Turn booster seat upside down and return height adjustment to
it’s lowest position. Refer to ‘Height Adjustment’ on page 3 for
instructions on how to do so.
3. Ensure tray is facing downwards and place in the underneath
of the booster seat, push down until it ‘clicks’ and locks into
position. Ensure tray is in orientation shown it image.
How to care for your Childcare booster seat
Cleaning
To ensure the long-lasting use of your booster seat, use a damp cloth to clean it. Do not use
abrasive cleaners. Allow it dry completely before folding or storing it away.
Maintenance
Check booster seat regularly to ensure that locking devices and components are secure
and working properly. Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required. To maintain the safety of your booster seat, seek
prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories
approved by CNP Brands. To prevent mould or mildew, do not fold or store the product if it is
damp or wet. Allow it to dry thoroughly. Always store the product in a well ventilated area and
away from direct sunlight.
If you have any difculties in assembling the stroller, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
IM_Booster Seat_043050-272.indd 7 28/02/2013 09:27:08

8
Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000 [email protected]
IM_Booster Seat_043050-272.indd 8 28/02/2013 09:27:08