Childcare Glider Rocking Chair & Ottoman "Sand" User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Glider
Rocking Chair & Ottoman “Sand”
Model # 164100A-110

Read all instructions before assembly and use of the glider rocking chair
& ottoman.Keep instructions for future use.
BEFORE ASSEMBLINGTHIS COT, READ AND UNDERSTAND THE INSTRUCTIONS.
Crush and amputation hazards:
A child’s hands can be trapped in moving parts of the Rocking Chair or Ottoman.
Always ensure child’s hands are clear from moving parts of the Rocking Chair or Ottoman.
Ensure the fabric covers over the Chair and Ottoman bases are tted at all times.
Stop using this Glider Rocking Chair & Ottoman if any part is broken, torn or missing.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
SAFETY PRECAUTIONS
WARNING

Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic,therefore product fabrics,colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Glider Rocking Chair & Ottoman
Congratulations on your purchase of the Glider
Rocking Chair & Ottoman“Black”
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS

ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
InAustralia,contact CNP Brands on 1300 667 137,in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Chair frame
Ottoman frame
x 1
x 1
x 1
x 1
x 2
x 4
x 2
x 2
Seat cushion
Ottoman
cushion
Armrest pads
(L+R)
Plastic nut
Plastic spacer
45mm bolt
There are no accessories recommended for use with this Childcare Glider Rocking Chair & Ottoman.

ASSEMBLY / OPERATING INSTRUCTIONS
Supplied loose in box continued:
To assemble Chair Frame...
1
2
3
Unfold backrest of chair frame.
Insert plastic nuts into both sides of the hole in
the backrest frame.
Insert 45mm bolt through plastic nuts so it is
pointing to the outside of the chair.
Place plastic spacer onto bolt.
1a.
2a.
2b.
3a.
42mm bolt
38mm bolt
(dome head)
x 4
x 4
x 1
x 1
Rocker frame
base cover
Ottoman frame
base cover

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Chair Frame continued...
To attach Seat Cushion...
4
1
2
3
Tighten bolt onto locating tube on armrest using
Phillips head screwdriver (not included).
Repeat steps 2-5 to assemble other side screw.
Slide backrest cushion over the top of the seat frame.
Pull cushion down until it is completely in position.
Slide pocket underneath base of seat cushion over
the front of the seat frame.
4a.
1a.
2a.
3a.
Ensure screws are secure but not over-tightened.
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To attach Seat Cushion continued...
To assemble Armrests...
4Hook seat cushion loops onto the pins.4a.
1
2
3
Place armrest into position on the seat frame.
Ensure the correct armrest is located on the correct
side,as indicated by stickers on the frame and
armrests.
Secure the armrests using 42mm bolts and tighten
with Phillips head screwdriver.
Secure the Velcro tabs on the armrests around the
bottom bar of the seat frame as shown.
Repeat steps 1-3 to assemble other side armrest.
1a.
1b.
2a.
3a.
3b.
Ensure screws are secure but not over-tightened.
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Fabric Base Cover..
1
2
3
4
5
Secure cover to rear of seat frame by wrapping Velcro
around rear bar as shown.
Attach Velcro loops on top and bottom of rear
fabric around frame as shown.
Repeat for loops on other side of rear.
Pass sides of cover behind frame and armrests as
shown.
Attach lowermost Velcro loops on cover front
around rocking mechanism frame as shown.
Attach uppermost Velcro loops around seat
frame as shown.
Join the two Velcro ends of the fabric cover together.
1a.
2a.
2b.
3a.
4a.
4b.
5a.

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Ottoman...
1
2
3
4
Place fabric Ottoman cover over frame of Ottoman.
Turn Ottoman over, and secure Velcro loops around
bottom of Ottoman frame.
Place Ottoman frame onto Ottoman cushion.
Secure Ottoman cushion onto frame using 38mm
domed head screws.
Tighten using Phillips head screwdriver.
1a.
2a.
3a.
4a.
Ensure screws are secure but not over-tightened.
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Ottoman continued...
To adjust Back Rest...
5
1
Fasten Velcro loops on Ottoman sides around base of
Ottoman frame.
To adjust backrest,push lever down and slide base of
cushion forwards or backwards.
5a.
1a.