Chipolino SPEED User manual

This product is produced in conformity with the Toy Safety
Directive 2009/48/EC of the European parliament and the council, the National
Legislation and the applicable European standards.
IMPORTANT! KEEP THIS MANUAL FOR FUTURE REFERENCE!
INSTRUCTION MANUAL FOR USE
FOR KID’S BALANCE TOY ON WHEELS
“SPEED”

1
TO GUARANTEE THE SAFE USE OF THIS PRODUCT, FOLLOW THE WARNINGS,
GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL:
IMPORTANT! MAJOR WARNINGS!
CAUTION! USE ONLY UNDER DIRECT ADULT SUPERVISION AND WITH A COMPANION –
DANGER OF FALLING!
CAUTION! THIS TOY HAS NO BRAKES!
CAUTION! TO BE USED ONLY BY CHILDREN OLDER THAN 24 MONTHS! THE TOY IS NOT
SUITABLE FOR CHILDREN UNDER 24 MONTHS!
CAUTION! MAXIMUM CHILD WEIGHT 30kg. DO NOT OVERLOAD! NOT TO BE USED BY
CHILDREN MORE THAN 30kg.
CAUTION! BEFORE USING THE TOY, TEACH THE CHILD THE CORRECT USAGE AND SAFETY
RULES.
CAUTION! THE CHILD MUST WEAR A HELMET, KNEE AND ELBOW PROTECTORS AND
SHOES WHEN USING THE TOY!
CAUTION! USE THE TOY ONLY DURING THE DAY AND ON EVEN SECURED PLAYGROUNDS
AT A SAFE DISTANCE FROM STREETS AND ROAD LANES FOR VEHICLES.
CAUTION! KEEP AWAY FROM FIRE!
CAUTION! USE THE TOY ONLY FOR ITS PURPOSE.
ONLY an adult should assemble the TOY!
DO NOT let children under 3 years near the TOY before you have assembled it, to avoid their access
to small and disassembled parts!
This TOY is intended for ONLY one child!
DO NOT use the TOY if some parts are damaged or missing.
DO NOT put additional strings or accessories to the TOY to avoid risk of suffocation!
DO NOT leave items or luggage on the handle bar to avoid risk of balance disturbance.
DO NOT put items or heavy objects on the TOY during transportation and storing to avoid damage
of the construction.
DO NOT move the TOY by pulling it with another transport means!
DO NOT let the child playing with the TOY or other children near it to touch the wheels or put items
inside them!
Keep away from rivers, pools, stairs and hurdles!
 make changes or modications to the TOY construction! If necessary, contact the retailer
or an authorized service for advice and repair.
DO NOT use spare parts or other components, which are not provided by the producer!
The producer revokes all responsibility in case spare parts have been used, which are different from
the original ones or recommended by the producer.
Keep the nylon package away from children to avoid risk of suffocation!

2
The TOY is intended for children older than 24 months with weight not more than 30kg.
The handle bar and saddle are adjustable in height.
Safe grips on the handle bar
The toy is supplied by the producer partially assembled.
Please make sure all parts are available in the package.
Tools needed: Hex key and bike wrench (included in the set).
KIDS BALANCE TOY ON WHEELS is a bicycle without pedals, which develops in your child sense
of orientation and speed in a safe way. This creates a feeling of balance and safety because the
child’s feet are in contact with the ground at all times. While riding the bike, the child learns to bal-
ance and exercises different moves (turn left and right), learns to control speed depending on its
abilities.
1 – HANDLEBAR
2а –ENDCAPOFHANDLE-
BAR CLAMP
2b – END CAP OF SADDLE
CLAMP
3а –HANDLEBARCLAMP
3b – SADDLE CLAMP
4 – FLAT WASHER
5а –HANDLEBARCYLINDER
WITH BEARING
5b – FRONT WHEEL FOR CYL-
INDER WITH BEARING
6 – FROTN WHEEL FORK
7 – BIKE FRAME WITH REAR
WHEEL
8 – SADDLE
9 – HEZ KEY
10 – BIKE WRENCH
PRODUCT FEATURES
MAIN PARTS
CAUTION! FOLLOW EXACTLY THE GUIDELINES AND SEQUENCE OF ASSEMBLY AND USE,
WHICH YOU WILL FIND IN THE TEXT AND FIGURES.
CAUTION! CHECK FIXING IS SECURE AFTER COMPLETING EACH OPERATION!
CAUTION! TIGHTEN THE BRACKETS WELL. IF THEY ARE LOOSE, THE PRODUCT MAY FALL
APART AND THE CHILD MAY BE INJURED.
ASSEMBLY AND USE GUIDE
10
2a
3a
5a
5b
2b
3b
9
8
1
4
6 7

3
STEP 1:
А– Insert the fork with 5b cylinder bearing into the front part of the bike frame. Be careful not to damage
the bearing.
В– The fork rod should protrude beyond the front part of the frame.
STEP 2:
А – Remove the cylinder bearing 5а from the handlebar, then place it on the protruding fork rod. The
narrow part of the cylinder should completely retract in the front part of the frame. This way the fork will
be properly connected to the frame which will prevent it from shifting.
В – Place the handlebar in the front wheel fork. Make sure that the rst element that will be placed above
the cylinder bearing is the at washer (part 4), then the handlebar clamp (part 3a) and at the top the end
cap for handlebar (part 2a).
С– Adjust the height of the handlebar to suit your child’s height and tighten the hex screw of the han-
dlebar clamp clockwise.
CAUTION! There is a security tag on the handle bar post. The handle bar must be adjusted in position
so that the security tag is never visible!
1
A B
2
5a
5a
2a
3a
4
6
B C
A - 2A - 1

4
STEP 3:
А– First loosen the saddle clamp (part 3b) with hex key so that you can slide the saddle rod through
it. When mounting the saddle, remember to adjust it to t the child’s height. Set the saddle in a suitable
height position, so that the saddle front is positioned above the tube frame and not sideways
В– To lock the saddle at the selected height, tighten the saddle clamp with a hex key clockwise.
CAUTION! Adjust the height of the saddle by following the security tag on the post (the mark must not
be visible).
CAUTION! The toy must be used with increased caution, because it requires balance skills. In this way,
you will avoid falling or collisions, which may injure the child or third persons.
CHOOSING THE OPTIMAL POSITION OF THE SEAT
The child must be comfortably seated, not leaning forward to the handle bar and its feet must be in full
contact with the ground.
IMPORTANT! For beginners we recommend initially to use the lowest position of the seat!
HELMET, KNEE AND ELBOW PROTECTORS, AND SHOES
FOR MORE SAFETY WHEN THE CHILD USES THE TOY, IT SHOULD WEAR A HELMET, KNEE AND
ELBOW PROTECTORS AND SHOES!
The helmet must be steady on the head, not tilted back or in
position in which it does not protect the forehead.
3
A B

5
CARE AND MAINTENANCE
Periodically check the good working order of all parts.
Do not wet the TOY. Clean with a soft damp towel and a neutral liquid soap.
Do not use aggressive detergents containing abrasive particles, ammonia, bleach or spirit.
Regularly oil the moving parts.
Do not use on sandy surfaces.
Do not store the TOY in areas with hot air or close to heat sources, because it will deform.
 Store the TOY in a clean and dry place. Do not subject to direct environmental inuence – sun, rain,
moisture or harsh temperature changes!
Always dry the TOY or let it dry before storing or using it again. Mildew may appear if you store the
product moist.
In case of problems related to the normal exploitation, contact the authorized service for advice or
repair.
Materials used: plastic, metal, rubber.
DIKSD021xxx/ BB003

Golyamokonarsko shosse 1, Plovdiv, BULGARIA
www.chipolino.com