Chipolino ZARA User manual

This stroller has been manufactured in accordance with
the Product Safety Directive 2001/95/EU of the European Parliament and The
Council and with European standard EN 1888-1 “Child care articles. Wheeled
child conveyances. Part 1: Baby strollers and carry cot”, EN 1888-2 “Child
care articles. Wheeled child conveyances. Part 2: baby strollers for children
from 15 kg to 22 kg” and the regulations of national law, including Consumer
Protection Law.
IMPORTANT! KEEP THIS MANUAL FOR FUTURE REFERENCE!
INSTRUCTION MANUAL FOR
BABY STROLLER
“ZARA”

1
CAUTION! WARNINGS!
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN THIS
MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT!
NEVER LEAVE YOUR CHILD UNATTENDED!
THE CARRY COT IS SUITABLE ONLY FOR A CHILD, WHO CANNOT SIT UNAIDED, ROLL OVER
AND CANNOT PUSH ITSELF ON ITS HANDS AND KNEES! MAXIMUM WEIGHT OF THE
CHILD IS 9 KGS!
USE THE POSITION OF THE BACKREST FOR THE SITTING POSITION OF THE CHILD
AFTER 6 MONTHS AGE!
KEEP AWAY FROM FIRE!
DO NOT LIFT THE STROLLER BY THE SAFETY BAR!
ALWAYS USE THE RESTRAINT SYSTEM (SAFETY BELTS) ONCE THE CHILD CAN SIT
UNAIDED!
MAKE SURE THAT ALL LOCKING MECHANISMS ARE ENGAGED BEFORE EACH USE!
DO NOT CHANGE BACKREST POSITION, WHEN THE SEAT IS TRANSFORMED INTO CARRY
COT COT MODE!
MAKE SURE YOUR CHILD IS AT SAFE DISTANCE AWAY FROM THE STROLLER DURING
ADJUSTMENTS, FOLDING OR UNFOLDING OF THE STROLLER.
DO NOT ALLOW YOUR CHILDREN TO PLAY WITH THE STROLLER!
BEFORE EACH USE, CHECK THE STABILITY OF FIXING OF SEAT UNIT AND CAR SEAT!
THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SCATING!
To be used for a child with weight up to 22 kg.
Adult assembly is required!
Do not place additional mattress thicker than 20 mm in the seat!
Always activate the parking device when you put the children in or out of the stroller!
Make sure the safety belts are correctly fastened and adjusted before each use.
The maximum load for the storage basket is 2 kg!
The maximum load for a diaper bag (if one is provided) is 2 kg!
Do not overload the stroller! Every load attached to the handle, bumper, and backrest or on the side
 ofthestrollerwilla󰀨ectitsstability!
To be used for one child only at a time. Do not place two or more children in the stroller!
Only use spare parts or other components, which are recommended or supplied by the producer!
In the contrary case the producer is not responsible for the product’s safety.
 Donotmakeanychangesormodicationstothestroller'sconstruction!Incaseofproblemscontact
the dealer or an authorized repair service for advice and/or repair.
The car seat does not replace the crib or cot bed for the baby. When the baby needs to sleep,
you must place him in a suitable baby stroller, crib or cot bed.
 Donotusethisstrollerifyoundmissingordamagedparts!
Do not allow children younger than 3 years near the stroller during its assembly!
 Donotattachanystringsorlongcordstothestrollerinordertoavoidriskofsu󰀨ocation!
Do not use the stroller on stairs or escalators and pay attention when overcoming a curb or a step.
 Keeptheplasticpackagingawayfromchildreninordertoavoidriskofsu󰀨ocation!

2
PRODUCT FEATURES
MAIN PARTS DIAGRAM
This stroller is intended for infants or babies under 4 years of age or weighing up to 22 kg
 (whichevercomesrst);
The seat transforms into a carry cot suitable for newborn baby or baby aged no more than 6 months
 andwithweightupto9kg;
Car seat “Zara”, Group 0+ (0-13 kg). It is safe and compatible with Zara stroller’s frame.
Note: Car seat is sold separately. All instructions and recommendations for safety usage and
installation are given in separate user’s manual
 Seatunitcanbeinstalledin2directions–forwardfacingandrearwardfacing;
 5-pointsafetyharness;
 Adjustableseat–3positions;
 Adjustablebackrest;
 Adjustablecanopy;
Swivel and straight motion of front wheels.
Bumper guard
Safety harness
Button to remove
bumper guard
Button to
fold the seat
Button to adjust
the seat positions
Button to
remove the seat
Parking devices
Button for swiveling /
straight direction
Folding button
Storage basket
Handle
Canopy
Rear wheel
Front wheel
Front wheels Rear wheels

3
ASSEMBLY INSTRUCTIONS AND FUNCTIONS
ASSEMBLY
This stroller is supplied partially assembled. In order to complete the assembly, you don’t need any
tools.
IMPORTANT! Follow exactly the instructions given and check the pictures. Keep your hands from en-
trapment!
IMPORTANT! After each operation, make sure that you have followed the instructions correctly and the
xingisstable!
IMPORTANT! In most cases after the completion of an operation you will hear a clicking sound.
The assembly, disassembly and functions are numbered from 1 to 15. Use the operations descriptions
given in this manual and their matching picture.
1 – FRAME UNFOLDING
1-1Releasethexing
1-2 And 1-3 Pull the handle upwards until stroller unfolds and you hear a click sound.
2 – INSTALLATION AND REMOVAL OF FRONT WHEELS
2-1 and 2-2 – Installation
2-3 – Removal
Press the button for removal and pull out the wheel from the frame.
3 – INSTALLATION AND REMOVAL OF REAR WHEELS
3-1 and 3-2 – Installation
3-3 – Removal
Pull the lever for removal downwards and take the wheel out of the frame.
4 – INSTALLATION AND REMOVAL OF THE SEAT UNIT
4-1 – Installation
Placetheseattotheframeasgureshowsandpressuntilyouhearaclicksoundandseatxes.
4-2 – Removal
Press the buttons for removal of seat at both sides and take the seat out of the frame.
4-3 and 4-4 - Seat unit can be installed in 2 directions – forward facing and rearward facing
5 – INSTALLATION AND REMOVAL OF THE BUMPER GUARD
5-1 – Installation
Placethebumperguardtotheframeasgureshowsandpressuntilyouhearaclicksoundandbumper
guardxes.
Bumper guard
SeatFrame

4
FUNCTIONS
6 – ADJUSTMENT OF THE CANOPY
CAUTION!Ifthecanopyisnotassembled,placeitsplasticendingstotheframeandpressuntiltheyx.
After that close the zipper to the seat fabric.
CAUTION! Always attach the canopy to the backrest to prevent the baby to fall and injury!
Using the canopy:
• Pull the canopy with your hand to fold it.
• Push the canopy with your hand to open it.
7 – SWIVEL AND STRAIGHT MOVMENT OF FRONT WHEELS
IMPORTANT!Whenusingthestrolleronunevensurfaces,xthewheelsforstraightmovementonly.
8 – PARKING DEVICE
CAUTION! Always engage the parking device, when the stroller is stationary to avoid the risk of slipping
of the stroller!
9 – BACKREST ADJUSTMENT
Press the adjusting mechanism (9-1) and move the backrest up or down (9-2). Release the mechanism
inordertoxthedesiredposition.
10 – LEG REST ADJUSTMENT
Fasten the two belts (10-1) underneath the leg rest as shown in the picture 10-2.
11 – SEAT POSITION ADJUSTMENT
Seat can be adjusted in 3 positions.
Press the buttons for seat adjustment at both sides of stroller and set the seat to the desired position.
12 – RESTRAINT SYSTEM (SAFETY BELTS)
12-1 – Join the shoulder and waist belts through the hooks. Fasten the safety belt (points 1 and 2) into
the central buckle (3). Press the central buckle button in order to unfasten the safety belt
12-2 – Adjust the belts length using the plastic sliders
Remark: Belt must be snug to child’s body and must not be twisted
CAUTION! Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
15 – FOLDING THE STROLLER
IMPORTANT! Before folding the stroller, always activate the parking device and empty the storage
basket.
13-1 – Set the seat in upright position and fold the canopy.
13-2 – Press the folding buttons for seat.
13-3 – Fold the seat.
13-4 – Move the slider at locking mechanism left and at the same time press the folding button.
13-5 – Press the handle down until stroller folds.
13–6Lockthexing.
14 – TRANSFORMING THE SEAT INTO COT
14-1 – Set the seat in lying position. Unfasten the belts underneath the seat.
14-2 – Set the backrest in lying position as pressing the mechanism for backrest adjustment and pull it
downwards.
CAUTION! WHEN THE SEAT IS IN CARRY COT MODE, IT MUST BE IN REARWARD POSITION –
CHILD FACING THE PARENT.
IMPORTANT! When the seat is transformed in carry cot, always remove the safety belts or tuck them to
the sides of the seat and cover them with a pad/mattress/ with thickness up to 20 mm.

5
15 – INSTALLATION AND REMOVAL OF CAR SEAT “ZARA” ON FRAME OF STROLLER ZARA
ATTENTION! ALWAYS INSTALL THE CAR SEAT IN REARWARD POSITION – CHILD FACING THE
PARENT.
15-1 - You can install the car seat on the frame of this stroller using adaptors.
15-2and15-3–Placeeachoftheadaptorstothecarseatasshowninthegure.Pressuntilyouhear
aclicksoundandadaptorsx.
15-4 - Place the car seat with adaptors on the adaptors of the frame and press until you hear a click.
Makesurethecarseatisstablexedtothestroller’sfameastryingtopullitupwards.
15-5 – Installed car seat ZARA on frame of stroller ZARA.
15 – 6 - Press the removal buttons upwards and take out the car seat form the frame.
Release the xing
Lever for
removal
Button
for removal
press
press
“click”
“click”
“click”
“click”

6
Button for
seat removal
Button for
removal
Released
parking device Activated parking device
Swiveling Straight motion
press
Folding
Unfolding
Belt
Button for seat
adjustment
“click”
“click”
press

7
Buckle
Slider
Fixing
Frame
adaptors
“click”
Belts Belt
Button for
seat folding
Folding
button
Car seat

8
CARE AND MAINTENANCE GUIDELINES
The brakes and wheels wear out faster than other parts. Replace them when necessary.
Regularly oil the moving parts.Use silicone oil or silicone spray for oiling.
Clean and oil all dirty metal and plastic parts regularly.
Clean the fabrics, plastic parts and metal parts with damp cotton cloth or sponge and mild soap.
Do not use aggressive detergents, solvents, bleach or spirits to clean your stroller.
Always leave the stroller to fully dry after cleaning before you use it or store it. Mold could form if you
keep your stroller moist.
Always store your stroller indoors in clean and dry place. Do not expose to direct environment
 inuence-sun,rain,moistureandhightemperatureintervals.
Please, contact your authorized dealer for problems connected with the use or repair of this stroller.
Fabric Composition:
Outer: 100% Polyester
Filling: 100% Polyester
Used materials: plastic, textile, metal
KKZAT022xxxx
Adaptor
Button for
removal
“click”

Bulgaria, Plovdiv, str. Golyamokonarskoshosse 1
www.chipolino.com