Chord 2 Qute User manual

2Qute
Instruction Manual
Mini driverless digital to analogue converter
Thank you for purchasing the Chord 2Qute. In order to get the most from your
product please, take a few moments to read these instructions.
2Qute advances the award-winning Qute EX DAC to the latest Chord DAC
specification. 2Qute features a high-performance Spartan 6 F GA that enables the
latest WTA DAC design with 26,368 tap length filter. The 2Qute boasts astonishingly low
distortion levels of 0.0003%.
2Qute offers support for up to 32-bit/384kHz audio via coax and USB, and 24-bit/192kHz
over optical.DSD64 is supported on all inputs and DSD128 is supported via coax or USB
(all via Do ).
Inputs can easily be changed via a switch to easily move between coax, optical and
USB digital inputs.
2Qute features a Class 2 USB input which is galvanically isolated for greater sonic
performance. The input is driverless on Apple and Android devices, with (ASIO included)
drivers for Windows devices.
Chord Electronics Limited
Chord Electronics Limited

BNC coaxial
connection
ower
12V
Input
switch Optical TOSLink
connection
HD USB
connection
hono
connection
Operation
lug your power adapter into 2Qute and it will cycle through a sequence of colours
and then be ready for operation. Select the input you wish to use using the input switch
and plug in your input cables, as appropriate.
Driver Installation
If you are using the high definition (HD) USB input with a Microsoft WindowsTM Vista,
7 or 8 C then you will need to install the driver software on the supplied memory stick.
Before connecting to 2Qute, double click the driver file to open it and then click the
setup file to start the installation process. Follow the screen prompts to complete the
installation. AppleTMor AndroidTMplatforms are driverless and do not require a driver
to operate.
suitable for all digital devices and computers
Inputs are indicated by coloured source LED
the white LED indicates you are currently using the HD USB input
the green LED indicates you are currently using the TOSLink Optical input
the red LED indicates you are currently using the BNC Coaxial input

Coax Input
Connect a coax digital signal to the BNC type coax socket and select the coax input
indicated by the red source light.
This input supports 44.1kHz - 384kHz operation.
Optical Input
Connect an optical digital signal to the TOSLink socket and select the optical input
indicated by the green source light.
This input supports 44.1kHz - 192kHz operation.
HD USB Input
The high definition (HD) USB input is the highest quality method of digital playback with
galvanic isolation. This input is asynchronous and uses 2Qute’s own highly accurate
clock circuit. This input will support 384kHz CM/DXD and also DSD64 and DSD128 in
Do format. No drivers are required for Apple and Android devices but for Microsoft
WindowsTM, you must firstly load the drivers on the supplied memory stick. This input
supports 44.1kHz - 384kHz operation.
Select the HD USB input indicated by the white source light.
ower Connection
2Qute has been designed to be permanently connected to the AC power adapter.
lug in the supplied power adapter to 2Qute. lease ONLY use the power adapter
supplied. Using an non-genuine power adapter may void your warranty.
Sample Frequency Lights
Each digital sample frequency received will cause 2Qute to illuminate different colours
to indicate correct operation. The key below shows which colour indicates the
sample rate.
44.1 48 88.2 96 176.4 192 352.8 384 DSD

Specifications
Input: Coax, optical and USB digital inputs with input switch
Output: 3v RMS 1kHz RCA phono
Sample Rate: 32-bit/384kHz via coax and USB, and 24-bit/192kHz via optical
USB specification: 32/384kHz galvanically isolated class compliant
Dynamic range: -119dB A/Wt
THD: 0.0003% at 3v RMS 1kHz; 0.0002% at 2v RMS 1kHz
Crosstalk: 126dB 1kHz
Frequency Response: +/- 0.1dB 20-20kHz
ower supply: 12V 0.5A
Dimensions: 0.4Kg
Weight: 160x70x40mm (width x height x depth)
Chord Electronics Limited
Chord Electronics Limited
Made in England by Chord Electronics Ltd
www.chordelectronics.co.uk