Chord 2go Specification sheet

3.1 Before attaching 2go to
Hugo 2, you must perform
the following step to avoid damage.
Take both locating screws from the
package and carefully thread them into
the holes marked right, thumb-tight.
Charging1.0
2.0
Connect3.0
REGISTER PRODUCT
First name Last name
Product
Email
Product serial number
Registeryour Chord Electronics product now and take the first important step to protecting your investment.Our simple form only takes sixty
seconds to completeand helps us to provide you with the best possible after sales support.
3.3 To prevent damage to the connectors,
you must ‘lock’ both devices together.
Locate the small screws at the top and
bottom of 2go and insert the provided
Allen key. Gently tighten, never using
excessive force.
1 // 2
3.2 Carefully slide 2go onto the locating
screws installed on Hugo 2.
Use gentle pressure (not excessive force)
to align the Micro USB sockets and slot
the two products together.
Get started with 2go
Before initiating playback
with 2go, prepare its battery
for the optimum performance by giving it
a full charge.
Separate 2go from Hugo 2 and connect a
suitable charger capable of delivering at
least a 2-amp current (such as Hugo 2’s)
to 2go’s charger input; charge for six
hours.
To document your purchase
and gain the best service
experience, we recommend you register
2go. Peace of mind can be achieved in
under one minute! Simply visit the
following link:
chordelectronics.co.uk/register-product
Register
Chord Electronics
2go Information Card v1.0
Charging1.0
Register2.0
Connect3.0
Get started with 2go

Get started with 2go
Download4.0
The Gofigure app is a helpful
configuration app for Chord
Electronics streaming products. It is
available for both iOS and Android
devices. First, please download this.
ATTENTION: If you never wish to use a
wireless network, customise your device
or view its settings you can skip steps 01
– 02 and instead plug in an ethernet
cable.
5.0
Once Gofigure has installed,
please open the app and
follow the onscreen instructions to
connect 2go to your wireless network
and personalise its settings.
The app will prompt you to open your
wifi settings and connect to the wifi
network (hotspot) that 2go is broadcast-
ing. This is to complete the intial setup.
OTHER NETWORKS:
2-go
Chord Electronics
Pumphouse
Now that 2go is successfully
connected and you have
followed the instructions for set up, you
can begin playback. You can use Airplay
for an Apple device, a DLNA app from a
mobile/desktop device, Roon and much
more.
To make sure that audio is being
wirelessly routed to 2go please set it as
the output device (also known as the
‘endpoint’).
Playback6.0
Roon
7.0
One of the best ways to enjoy the
freedom and unparalleled sound
quality of 2go is via Roon which is a
premium music management and
listening solution.
Download your exclusive free two-month
Roon trial using the unique code provided:
Sign into your Roon account
EMAIL
You can manage your account details,
memberships, and payment information as
well as refer friends and send gifts.
PASSWORD
SIGN IN
2 // 2
Network
Chord Electronics
2go Information Card v1.0
Download4.0
Network
5.0
Playback6.0
Roon
7.0
Get started with 2go