Christie CineLife+ CP4415-RGB Assembly instructions

Installation and Setup Guide
020-103244-06
CineLife+ 4K-RGB
CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-
RGB

NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Our centers of excellence for manufacturing in Kitchener, Ontario, Canada and in Shenzhen, China are ISO
9001:2015 Quality Management System-certified.
For the most current technical documentation and office contact information, visit http://www.christiedigital.com.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products.
If printing this document, consider printing only the pages you need and select the double-sided option.
Please help us to conserve the environment we live in!

Content
Introduction...................................................... 6
Product documentation................................................6
Related documentation..............................................6
Models..........................................................6
Safety precautions...................................................7
General safety precautions........................................... 7
Laser safety precautions.............................................7
AC power precautions...............................................8
Light intensity hazard distance.........................................8
Product labels...................................................17
Projector components (front)...........................................20
Projector components (rear)............................................21
List of components..................................................21
Accessories.................................................... 21
Key features......................................................25
Contact your dealer.................................................25
Technical support...................................................25
Installing and setting up............................................26
Site requirements.................................................. 26
Preparing the installation site...........................................26
Lifting and positioning the projector.......................................27
Connecting to power................................................ 27
Connecting to an uninterruptible power supply................................ 31
Installing the lens..................................................32
Projector power modes...............................................34
Using the Remote user interface (UI)......................................35
Turning the projector on or off.......................................... 35
Logging on to the projector............................................ 35
Turning the light source on or off.........................................36
Activating marriage.................................................36
Activating IMB marriage.............................................. 36
Disposing of the product packaging....................................... 37
Completing the installation checklist.......................................37
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 3
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Video Input panel................................................. 38
HDMI video source..................................................39
HDMI video formats...............................................39
SDI video source...................................................41
SDI video formats................................................41
DisplayPort video source..............................................54
DisplayPort video formats........................................... 54
Integrated Media Block (IMB) video source...................................56
Series 2 IMB video formats.......................................... 56
HDMI video source connection from an IMB................................59
SDI video source connection from an IMB................................. 59
Managing the light source...........................................60
Creating a new laser file for CP4415-RGB, CP4420-RGB, CP4425-RGB, and CP4435-RGB......60
Creating a new laser file for external chiller-based projectors....................... 61
Modifying an existing laser file.......................................... 62
Copying existing laser settings to a new file..................................62
Deleting a laser file................................................. 62
LiteLOC™ sensor-to-screen calibration ..................................... 63
LiteLOC sensor-to-screen calibration: Workflow..............................63
Creating a new calibration file.........................................63
Recalibrating an existing calibration file...................................65
Editing the existing calibration file parameters.............................. 66
Verifying the sensor-to-screen calibration .................................66
Adding a calibration file to the Channel Setup...............................67
Adjusting the image............................................... 68
Calibrating the Intelligent Lens System.....................................68
Correcting vignetting................................................ 68
Adjusting tilt and leveling the projector.....................................68
Correcting keystone effect.............................................69
Displaying a test pattern..............................................70
Adjusting the integrator rod and fold mirror..................................70
Adjusting boresight................................................. 73
Adjusting DMD convergence............................................76
Correcting on-screen color.............................................78
Correcting color convergence using ECC.................................... 78
Regulatory...................................................... 80
Content
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 4
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Safety......................................................... 80
Electro-magnetic compatibility.......................................... 80
Emissions..................................................... 80
Immunity..................................................... 80
Environmental.................................................... 81
Content
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 5
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Introduction
This manual is intended for professionally trained operators of Christie high-brightness CineLife+ 4K-
RGB projection systems.
Only trained Christie qualified technicians who are knowledgeable about the hazards associated with
high-voltage, laser safety, and the high temperatures generated by the projector are authorized to
assemble and install the projector. Only Christie qualified technicians are authorized to service the
projector.
For complete production documentation and technical support, go to www.christiedigital.com.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
• Go to this URL: https://bit.ly/3vxrm4Y or
https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
•CineLife+ User Guide (P/N: 020-103073-XX)
•CineLife+ 4K-RGB Product Safety Guide (P/N: 020-103243-XX)
•CineLife+ 4K-RGB Service Guide (P/N: 020-103257-XX)
•CineLife+ Serial Commands Guide (P/N: 020-103075-XX)
Models
• CP4415-RGB
• CP4420-RGB
• CP4425-RGB
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 6
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

• CP4435-RGB
Safety precautions
Learn about the safety precautions related to the Christie CineLife+ 4K-RGB projector.. This projector
is intended for use in a cinema environment.
General safety precautions
Read all safety and warning guidelines before installing or operating the projector.
Warning! If not avoided, the following could result in death or serious injury.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• High leakage current present when connected to IT power systems.
• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
Laser safety precautions
Read all safety and warning guidelines before operating the projector laser.
Warning! If not avoided, the following could result in death or serious injury.
• Do not operate the cinema projector without all of its covers in place.
• LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the laser module.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• Possible hazardous optical radiation emitted from this product. (Risk group 3)
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 7
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

AC power precautions
Read all safety and warning guidelines before connecting to AC power.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
• SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• Install the product near an easily accessible AC receptacle.
Caution! If not avoided, the following could result in minor or moderate injury.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
• SHOCK HAZARD! Power supply uses double pole/neutral fusing.
Light intensity hazard distance
This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to
possible hazardous optical and thermal radiation being emitted.
Warning! If not avoided, the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. Class 1 Laser Product - Risk Group 3 according to IEC 60825-1:2014 and IEC
62471-5:2015.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam
within the hazard distance or install the product at the height that prevents exposure of
spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters
(US installations) or 2.0 meters (global installations) above any surface upon which any persons
are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0
meters.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
The following show the zones for ocular and skin hazard distances.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 8
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

• A—Hazard zone. The region of space where the projection light from the laser-illuminated
projector is above emission limits for Risk Group 2. The light intensity may cause eye damage
after a momentary or brief exposure (before a person can avert his or her eyes away from the
light source). The light may cause skin burns to occur.
• B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US
installations) or 2.0 meters (global installations) above any surface upon which any persons
are permitted to stand.
If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal
clearance distance (Zone C) is not needed.
• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
CP4415-RGB and CP4420-RGB lenses
Lens Part number
High brightness fixed
0.9:1HB Fixed 38-809071-xx
High brightness zoom
1.13-1.66 108-342100-xx
1.31-1.85 108-335102-xx
1.45-2.17 108-336103-xx
1.63-2.71 108-337104-xx
1.95-3.26 108-338105-xx
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 9
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Lens Part number
2.71-3.89 108-278101-xx
3.89-5.43 108-279101-xx
4.98-7.69 108-280101-xx
High brightness premium zoom
1.13-1.72 163-141107-xx
1.35-1.84 163-142108-xx
1.45-2.10 163-143109-xx
1.65-2.70 163-144100-xx
High contrast zoom
1.13-1.66 152-117100-xx
1.31-1.85 152-118101-xx
1.45-2.17 152-119102-xx
1.63-2.71 152-120104-xx
1.95-3.26 108-404109-xx
High contrast premium zoom
1.13-1.72 152-155102-xx
1.35-1.84 152-156103-xx
Ultra-high contrast fixed
0.9:1UHC Fixed 163-117100-xx
Ultra-high contrast zoom
1.13-1.66 163-103105-xx
1.31-1.85 163-104106-xx
1.45-2.17 163-105107-xx
1.63-2.71 163-106108-xx
1.95-3.26 163-107109-xx
2.71-3.89 163-108100-xx
3.89-5.43 163-109101-xx
4.98-7.69 163-110103-xx
Ultra-high contrast premium zoom
1.45-2.10 152-157104-xx
1.65-2.70 152-158105-xx
1.13-1.72 163-145101-xx
1.35-1.84 163-146102-xx
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 10
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Lens Part number
1.45-2.10 163-147103-xx
1.65-2.70 163-148104-xx
CP4425-RGB and CP4435-RGB lenses
Lens Part number
High brightness fixed
0.9:1 38-809071-XX
High brightness zoom
1.13-1.66:1 108-342100-XX
1.31-1.85:1 108-335102-XX
1.45-2.17:1 108-336103-XX
1.63-2.71:1 108-337104-XX
1.95-3.26:1 108-338105-XX
2.71-3.89:1 108-278101-XX
3.89-5.43:1 108-279101-XX
High brightness premium zoom
1.13-1.72:1 163-141107-XX
1.35-1.84:1 163-142108-XX
1.45-2.10:1 163-143109-XX
1.65-2.70:1 163-144100-XX
High contrast zoom
1.13-1.66:1 152-117100-XX
1.31-1.85:1 152-118101-XX
1.45-2.17:1 152-119102-XX
1.63-2.71:1 152-120104-XX
1.95-3.26:1 108-404109-XX
High contrast premium zoom
1.13-1.72:1 152-155102-XX
1.35-1.84:1 152-156103-XX
1.45-2.10:1 152-157104-XX
1.65-2.70:1 152-158105-XX
Ultra-high contrast fixed
0.9:1 163-117100-XX
Ultra-high contrast zoom
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 11
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Lens Part number
1.13-1.66:1 163-103105-XX
1.31-1.85:1 163-104106-XX
1.45-2.17:1 163-105107-XX
1.63-2.71:1 163-106108-XX
1.95-3.26:1 163-107109-XX
2.71-3.89:1 163-108100-XX
3.89-5.43:1 163-109101-XX
Ultra-high contrast premium zoom
1.13-1.72:1 163-145101-XX
1.35-1.84:1 163-146102-XX
1.45-2.10:1 163-147103-XX
1.65-2.70:1 163-148104-XX
The following give the hazard distance for the projector lens with the zoom adjusted to its most
hazardous position.
Hazard distance graph for CP4415-RGB lenses
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 12
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Hazard
distance
(m)
0
1
2
3
4
5
6
7
8
01235
4678
Throw ratio
High brightness lenses
High contrast lenses
Ultra high contrast
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 13
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Hazard distance graph for CP4420-RGB lenses
Hazard
distance
(m)
0
1
2
3
4
5
6
7
8
01235
4678
Throw ratio
High brightness lenses
High contrast lenses
Ultra high contrast
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 14
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Hazard distance graph for CP4425-RGB lenses
Hazard
distance
(m)
Throw ratio
High brightness lenses
High contrast lenses
Ultra high contrast
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 15
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Hazard distance graph for CP4435-RGB lenses
Hazard
distance
(m)
Throw ratio
High brightness lenses
High contrast lenses
Ultra high contrast
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
• The projection room shall be clearly identified by the posting of laser warning and restricted
access signs, and by restricting entry through physical means. The projection room sign must
display the warning "No direct exposure to beam shall be permitted".
• The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to [email protected]. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 16
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

• Certain US states have additional laser regulatory requirements. Contact
[email protected] for additional regulatory requirements.
Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Warning! If not avoided, the following could result in death or serious injury.
Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.
Electrocution hazard. To avoid personal injury, always disconnect all power sources
before performing maintenance or service procedures.
Optical radiation hazard. To avoid personal injury, never look directly at the light
source.
Voltage hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 17
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Caution! If not avoided, the following could result in minor or moderate injury.
General hazard.
Hot surface hazard. To avoid personal injury, allow the product to cool for the
recommended cool down time before touching or handling for maintenance or
service.
Burn hazard. To avoid personal injury, allow the product to cool for the recommended
cool down time before touching or handling for maintenance or service.
Moving parts hazard. To avoid personal injury, keep hands clear and loose clothing
tied back.
Moving fan blades. To avoid personal injury, keep hands clear and loose clothing tied
back. Always disconnect all power sources before performing maintenance or service
procedures.
Notice. If not avoided, the following could result in property damage.
General hazard.
Not for household use.
Mandatory actions
Caution! If not avoided, the following could result in minor or moderate injury.
Consult the service manual.
Disconnect all power sources before performing maintenance or service procedures.
IEC 60417-6172 (2012-09)
Electrical labels
Indicates the presence of a protective earth ground.
Indicates the presence of an earth ground.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 18
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Additional hazard labels
Indicates high leakage current. Earth or ground
connection essential before connecting the power
supply.
Indicates a light hazard. Do not look directly into the
lens. The extreme high brightness can cause permanent
eye damage.
Laser labels
CP4415-RGB, CP4420-RGB, CP4425-RGB, and CP4435-
RGB FDA laser variance (US projectors only)
This product is in conformity with performance
standards for laser products under 21 CFR 1040, except
with respect to those characteristics authorized by
Variance Number 2018-V-3898 effective on November
21, 2018.
CLASS 1 LASER PRODUCT IEC 60825-1:2014
CP4415-RGB wavelengths: 450 nm - 661 nm
CP4420-RGB wavelengths: 450 nm - 661 nm
CP4425-RGB wavelengths: 450 nm - 661 nm
CP4435-RGB wavelengths: 450 nm - 661 nm
Indicates a light hazard. Do not look directly into the
lens. The extreme high brightness can cause permanent
eye damage.
Class 1 Laser Product - Risk Group 3 according to IEC
60825-1:2014 and IEC 62471-5:2015
Indicates Class 4 laser radiation when open. Avoid eye
or skin exposure to direct or scattered radiation.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 19
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.

Projector components (front)
Learn about the components on the front of the projector
.
ID Component
A Projector lens
B Top cover
C Adjustable feet—Turn the adjustable feet to increase or decrease the projector height.
D Service access door
E Communications panel—External devices are connected here.
Introduction
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB 20
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.