Christie CP2309-RGB User manual

User Guide
020-103081-02
CP2309-RGB

NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2021 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Manufacturing facilities in Canada and China are ISO 9001 certified.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty. For preventative maintenance schedules, refer to
www.christiedigital.com.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!

Content
Introduction..................................................... 10
Product documentation...............................................10
Related documentation.............................................10
Safety precautions..................................................11
General safety precautions...........................................11
Laser safety precautions............................................11
AC power precautions..............................................12
Light intensity hazard distance........................................12
Product labels...................................................14
List of components..................................................16
Key features......................................................16
Contact your dealer.................................................17
Projector components (front)...........................................17
Projector components (rear)............................................18
Operating the projector.............................................19
Turning the projector on or off.......................................... 19
Projector power modes.............................................19
Logging on to the projector............................................ 19
Logging out of the projector..........................................20
Turning the touch panel on or off.........................................20
Calibrating the touch panel display........................................20
Turning the light source on or off.........................................20
Opening or closing the shutter.......................................... 21
Changing the orientation of the projected image...............................21
Changing the projector host name........................................22
Changing the temperature display........................................22
Configuring the projector time.......................................23
Adding a network time protocol server..................................... 23
Deleting a network time protocol server.................................... 23
Changing the time zone.............................................. 24
Changing the time format............................................. 24
Automatically adjusting the time for Daylight Saving Time.........................24
CP2309-RGB User Guide 3
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Manually adjusting the time offset........................................24
Managing the light source...........................................26
Creating a new laser file..............................................26
Modifying an existing laser file.......................................... 27
Copying existing laser settings to a new file..................................28
Deleting a laser file................................................. 28
Managing user accounts............................................29
Default user access permissions......................................... 29
Adding a user account............................................... 29
Changing user account permissions.......................................29
Changing a user account password........................................30
Deleting a user account...............................................30
Network settings..................................................31
Connecting the projector to the theater network...............................31
Connecting the projector to network attached storage............................31
Connecting the projector to a media or content network.......................... 32
Activating SNMP...................................................32
Downloading MIB information...........................................32
Setting up an integrated media block..................................34
Selecting IMB preferences.............................................34
Activating IMB marriage.............................................. 34
Managing content.................................................36
Ingesting content and keys............................................ 36
Content manager icons.............................................36
Canceling an ingest.................................................37
Viewing remaining NAS storage capacity....................................37
Filtering content by type..............................................37
Viewing available keys............................................... 37
Filtering the key list.................................................37
Deleting local content................................................38
Deleting keys.....................................................38
Viewing content details...............................................38
Playback controls...................................................38
Loading and playing content............................................39
Viewing an active content item..........................................40
Content
CP2309-RGB User Guide 4
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Looping content................................................... 40
Unloading content..................................................40
Managing playlists................................................ 41
Creating a new playlist...............................................41
Reordering playlist content.............................................41
Adding a time offset to a macro..........................................42
Replacing playlist content............................................. 42
Removing playlist content............................................. 42
Copying a playlist.................................................. 43
Opening an intermission playlist......................................... 43
Viewing an active playlist..............................................43
Viewing details about playlist content......................................43
Importing a playlist.................................................44
Exporting a playlist................................................. 44
Deleting a playlist..................................................44
Working with channels.............................................45
Selecting the active channel............................................45
Adding a channel for HDMI input.........................................45
Adding a channel for IMB input..........................................46
Editing an existing channel.............................................47
Copying existing channel settings to a new channel.............................48
Viewing the channel list...............................................48
Moving a channel up or down the channel list.................................48
Deleting a channel..................................................48
Managing color setting files.........................................49
Creating a MCGD file................................................ 49
Editing an existing MCGD file........................................... 49
Copying existing MCGD file settings to a new file...............................50
Deleting a MCGD file................................................ 50
Creating a TCGD file.................................................50
Editing an existing TCGD file............................................51
Copying existing TCGD file settings to a new file...............................51
Deleting a TCGD file.................................................51
Adjusting the image size and position................................. 52
Activating the Intelligent Lens System......................................52
Content
CP2309-RGB User Guide 5
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Creating a new ILS file...............................................52
Automatically calibrating the ILS.........................................52
Editing ILS file settings...............................................53
Copying existing ILS file settings.........................................53
Deleting an ILS file................................................. 53
Resetting the lens..................................................53
Creating a source file................................................53
Editing source file settings.............................................54
Copying existing source file settings to a new source file..........................54
Deleting a source file................................................54
Creating a screen file................................................55
Editing screen file settings.............................................55
Copying existing screen file settings to a new screen............................ 56
Deleting a screen file................................................56
Performing digital convergence..........................................56
Resetting digital convergence to the default settings.............................57
Adjusting the image............................................... 58
Correcting vignetting................................................ 58
Correcting keystone effect.............................................58
Masking the screen edges.............................................59
Test patterns.....................................................61
Displaying a test pattern..............................................61
Turning off a test pattern..............................................61
Importing a test pattern..............................................62
Deleting a test pattern............................................... 62
Working with the scheduler......................................... 63
Scheduling a playlist, content, or automation.................................63
Editing a scheduled event............................................. 64
Copying and pasting an existing scheduled event...............................64
Copying and pasting scheduled events for an entire day.......................... 64
Cutting and pasting a scheduled event..................................... 64
Deleting a scheduled event............................................ 65
Deleting scheduled events for an entire day..................................65
Changing the day of the week the scheduler starts..............................65
Turning the scheduler off..............................................65
Content
CP2309-RGB User Guide 6
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Managing storage devices.......................................... 66
Adding a new storage device........................................... 66
Editing storage device settings..........................................66
Setting a storage device as a primary drive.................................. 66
Deleting a storage device............................................. 67
Adding a remote ingest source..........................................67
Editing remote ingest source settings......................................67
Deleting a remote ingest source......................................... 68
Managing projector setting files......................................69
Creating a 3D file.................................................. 69
Editing an existing 3D file............................................. 69
Copying a 3D file...................................................70
Deleting a 3D file...................................................70
Managing audio settings............................................71
Setting the global audio delay...........................................71
Setting the audio output rate...........................................71
Mapping channels.................................................. 71
Enabling Dolby Atmos................................................72
Editing Dolby Atmos settings........................................... 72
Disabling Dolby Atmos............................................... 72
Setting up multiple projectors........................................73
Enabling multiple projectors............................................73
Adding a secondary projector...........................................73
Disabling multiple projectors........................................... 74
Disabling a secondary projector..........................................74
Deleting a secondary projector..........................................74
Automation......................................................75
Available macro actions...............................................75
Fire alarm macro...................................................76
Christie ACT actions.................................................76
JNIOR actions.....................................................77
Dolby Cinema processor actions......................................... 77
SKA-3D actions....................................................78
Creating a macro...................................................78
Running a macro...................................................78
Content
CP2309-RGB User Guide 7
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Adding an action item to an existing macro.................................. 79
Adding a macro to an existing macro...................................... 79
Deleting a macro...................................................79
Adding an automation device to your auditorium...............................79
Modifying automation device settings......................................80
Removing an automation device from your auditorium........................... 80
Creating a new playlist trigger.......................................... 81
Editing existing playlist trigger settings.....................................81
Deleting a playlist trigger..............................................81
Creating a new global trigger...........................................81
Editing existing global trigger settings......................................82
Deleting a global trigger.............................................. 82
Importing a device library.............................................82
Viewing a device library...............................................82
Deleting a device library..............................................82
Enhancements and licensing........................................84
Enabling an enhancement.............................................84
Enabling RealD 3D EQ................................................84
Importing a rental license file...........................................84
Backing up, restoring, and upgrading files..............................86
Creating a new backup file.............................................86
Sorting backup files by name and date created................................86
Exporting a backup file...............................................86
Importing a backup file...............................................87
Restoring settings from a backup file...................................... 87
Deleting a backup file................................................87
Adding an upgrade package............................................87
Comparing upgrade packages...........................................88
Installing an upgrade package.......................................... 88
Deleting an upgrade package...........................................88
Restoring factory default settings.........................................88
Accessing projector diagnostics..................................... 89
Retrieving and downloading system logs....................................89
Running the projector interrogator........................................89
Viewing laser diagnostic information.......................................90
Downloading a certificate..............................................90
Content
CP2309-RGB User Guide 8
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Regulatory...................................................... 91
Safety......................................................... 91
Electro-magnetic compatibility.......................................... 91
Emissions..................................................... 91
Immunity..................................................... 91
Environmental.................................................... 91
Content
CP2309-RGB User Guide 9
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

Introduction
This manual is intended for operators of Christie CP2309-RGB projection systems.
For complete production documentation and technical support, go to www.christiedigital.com.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
• Go to http://bit.ly/2V2E9wp or
https://www.christiedigital.com/en-us/cinema/cinema-products/digital-cinema-projectors/
christie-cp2309-rgb
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
•CP2309-RGB Installation and Setup Guide (P/N: 020-103078-XX)
•CP2309-RGB Product Safety Guide (P/N: 020-103079-XX)
•CP2309-RGB Service Guide (P/N: 020-103080-XX)
•CineLife Serial Commands Guide (P/N: 020-102714-XX)
•CP2309-RGB Specifications Guide (P/N: 020-103082-XX)
CP2309-RGB User Guide 10
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.