Christie GS 2K Series User manual

Christie GS Series 2K
DWU880-GS, DWU880A-GS, DWU9200-GS,
DWU1100-GS, DWU1100A-GS
User Manual
020-001908-01

NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy,however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties
of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the
performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.
For the most current technical documentationand office contact information, visit www.christiedigital.com.
WARRANTY
Products are warranted under Christie’s standard limited warranty, the complete details of which are available at https://www.christiedigital.com/help-center/
warranties/or bycontacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, andin
accordance with the maintenance schedule specified by Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limitsfor a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense. Changes or modificationsnot expressly approved by the party responsible for compliance could void theuser's
authority to operate the equipment.
CAN ICES-003 (A) / NMB-003 (A)
이기기는 업무용 (A 급 ) 으로 전자파적합등록을 한기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며 , 가정 외의 지역에서 사용하는 것을 목적으로 합니다 .
ENVIRONMENTAL
The product is designed and manufactured with high-quality materialsand components that can be recycled and reused. This symbolmeans that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!

3GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.
Content
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
AC/power precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installation safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Laser safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Product labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Projector overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Contact your dealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
How the projector works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
List of components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Product documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installation and setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Site requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Physical operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Power connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Projector components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Right view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Built-in keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Input/output (I/O) panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
IR remote keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Positioning the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Turning on the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Turning off the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
LED status indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Shutter LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

4
Content
Adjusting the size and position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting the image size preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Setting the digital size of display image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Setting the digital position of display image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Geometry correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Saving geometry correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Applying geometry correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Enabling basic image blending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Blending multiple images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Downloading a blend from the projector memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Adjusting horizontal keystone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Adjusting the vertical keystone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Adjusting horizontal pincushion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Adjusting vertical pincushion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Adjusting 4-corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Enabling auto warp filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Adjusting warp filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Resetting geometry correction setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Configuring warp and blend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Warping an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Downloading a warp from the projector memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Performing auto warp and blend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Adjusting the image settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adjusting the brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Adjusting the contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Adjusting the color space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Adjusting the image sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting up 3D display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting 3D format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Inverting 3D signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Selecting the 3D sync input signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Setting the 3D sync output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Setting the frame delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Configuring the video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Adjusting black and white video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Adjusting the color balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Adjusting the skin color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

5
Content
Reducing the temporal noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Reducing the MPEG noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Setting the input levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Adjusting the color gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Adjusting the color offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Resetting the input levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Configuring picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Applying customized user configuration setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Editing customized picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setting the contrast ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Enabling the image freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting the high dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Adjust the color of the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Adjusting primary colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting the wall color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Adjusting advanced image settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Adjusting the color value based on gamma setting . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Adjusting the white peaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Adjusting the color temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Saving user settings for data recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Configuring system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changing the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Adjusting lens settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Aligning the image with focus and zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Adjusting lens position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Saving lens setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Applying the previous lens setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Locking the lens motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Resetting the lens to home position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Selecting screen image orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Adjusting on-screen display menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Determining the on-screen display position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Showing messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Setting the transparency of the on-screen display position . . . . . . . . . . . . . . . . . . . . . .51
Changing the splash screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Setting time out for on-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Setting up password protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Changing password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

6
Content
Setting up power mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Setting the standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Setting the AC power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Setting the time for auto shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Enabling high altitude setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Setting the projector communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Enabling the 12V Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Configuring communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting network environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Adjusting LAN setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Using the web interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Using the RS-232C interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Re-connecting the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Adjusting WLAN setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Adjusting network setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Setting serial port baud rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Enabling serial port echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Setting the projector address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Adjusting the back light settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Setting the hot key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Configuring date and time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Scheduling events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Setting up a schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Configuring light settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting light source mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Adjusting the light power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Diagnostic tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Viewing projector information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Selecting a test pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Restoring factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Configuring input settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setting main input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Setting second input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Enabling second input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Swapping main input and second input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

7
Content
Setting the size of second input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Setting up the display layout with two input sources . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Input sources layout and size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Setting the timing detection mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Setting the input searching method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Setting up the backup input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Adjusting the sub image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Enabling low latency mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Configuring the HDMI setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Configuring the HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Signal connectivity specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
HDMI1/HDMI2 video formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
DVI video formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
3G-SDI video formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
HDBaseT video formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Picture-in-picture/picture-by-picture (PIP/PBP) compatibility . . . . . . . . . . . . . . . . . . . . . . .86
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Electro-magnetic compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

8
Introduction
This manual is intended for Christie-qualified installers and trained operators of the GS Series 2K
projector—DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, and DWU1100A-GS.
For complete GS Series 2K product documentation and technical support, go to
www.christiedigital.com.
This projector is intended for use in a non-cinema environment.
Safety and warning guidelines
This projector must be operated in an environment that meets the operating range specification.
Use only the attachments and/or accessories recommended by Christie. Use of others may result in
the risk of fire, shock, or personal injury.
Warning! If not avoided, the following could result in death or serious injury.
• Do not expose the product to moisture.
•Do not operate the product without all of its covers in place.
• This product must be installed within a restricted access location not accessible by the general
public.
•Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
•FIREHAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
•SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• OPTICAL RADIATION HAZARD! Disconnect the power plug from the AC outlet if the product is not
being used for an extended period of time.
•Donot allow anything to rest on the power cord.
•Always provide proper ventilation for the product to prevent overheating.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie-qualified technicians are permitted to open product enclosures.
• All procedures must be performed by Christie-qualified technicians.
Notice. If not avoided, the following may result in equipment or property damage.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause
product damage and void the warranty.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

9
Introduction
AC/power precautions
Read all safety and warning guidelines before powering on the projector.
Installation safety and warning guidelines
Read all safety and warning guidelines before installing the projector.
Warning! If not avoided, the following could result in death or serious injury.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
•FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
•SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
•FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
•SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
• SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• Install the product near an easily accessible AC receptacle.
Warning! If not avoided, the following could result in death or serious injury.
• High leakage current present when connected to IT power systems.
Caution! If not avoided, the following could result in minor or moderate injury.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• Only Christie-qualified technicians are authorized to use the tools provided in the toolbox.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

10
Introduction
Laser safety precautions
This projector has been classified as Class 1 Laser Product - Risk Group 2 according to IEC 60825-
1:2014 and IEC 62471-5:2015 standard. Read all safety and warning guidelines before installing or
operating the projector.
Warning! If not avoided, the following could result in death or serious injury.
• LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the laser module.
• Any operation or adjustment not specifically instructed in the User manual creates the risk of
hazardous laser radiation exposure.
• Do not operate the product without all of its covers in place.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• Only Christie-qualified technicians who are knowledgeable about the hazards associated with
laser use, high-voltage, and high temperatures generated by the product are authorized to
assemble, install, and service the Christie Laser Projection System.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage. Class 1 laser product of IEC/EN 60825-1:2014 and Risk Group 2
according to IEC 62471-5:2015.
• Additional instructions to supervise children, no staring, and not use optical aids.
• Additional instructions to install above the reach of children.
• Notice is given to supervise children and to never allow them to stare into the projector beam at
any distance from the projector.
• Notice is given to use caution when using the remote control for starting the projector while in
front of the projection lens.
• Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside
the beam.
• As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
• MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is recommended with this
product to place it above the eyes of children.
• Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as
defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019. IEC 60825-1:2014: CLASS 1 LASER PRODUCT - RISK GROUP 2.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

11
Introduction
Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension Cords.
Do not remove the product enclosure.
Only Christie-qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie-qualified technicians are authorized to service the product.
General hazard.
Electric shock hazard. To avoid personal injury, disconnect all power sources before performing
maintenance or service.
Electrocution hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.
Fire hazard. To avoid personal injury and property damage, follow the instructions provided in
this document.
Hot surface hazard. To avoid personal injury, allow the product to cool for the recommended cool
down time before performing maintenance or service.
Burn hazard. To avoid personal injury, allow the product to cool for the recommended cool down
time before performing maintenance or service.
Moving parts hazard. To avoid personal injury, keep hands clear and loose clothing tied back.
Fan hazard. To avoid personal injury, keep hands clear and loose clothing tied back. Always
disconnect all power sources before performing maintenance or service procedures.
Voltage hazard. To avoid personal injury, always disconnect all power sources before performing
maintenance or service procedures.
Not for household use.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

12
Introduction
Mandatory action
Electrical labels
Laser labels
Consult the service manual.
Disconnect all power sources before performing maintenance or service procedures.
Indicates the presence of an earth ground.
This projector has been classified as Class 1 Laser Product-Risk Group 2
according to the IEC 60825-1:2014 and IEC 62471-5:2015 standard.
Indicates a light hazard. Do not look directly into the lens. The extreme
high brightness can cause permanent eye damage. Class 1 Laser Product-
Risk Group 2 according to Class 1 IEC 60825-1:2014 and
IEC 62471-5:2015.
Do not look into the projector lens when the laser is on. The bright light
may result in permanent eye damage.
Mount above the heads of children. When within 1 m of the product, avoid
eye exposure to avoid temporary or permanent eye damage.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

13
Introduction
Projector overview
The GS Series 2K is a high brightness, high-resolution video graphics one-chip laser-based
projector. The projector is available in WUXGA resolution and uses Digital Light Processing (DLP™)
technology from Texas Instruments. It is primarily designed for fixed installation and secondary
applications including rental-staging and LBE (Location Based Entertainment). This product is used
for professional applications and is not for domestic use.
Contact your dealer
Record the information about your projector and keep this information with your records to assist
with the servicing of your projector. If you encounter a problem with your Christie projector, contact
your dealer.
Key features
• WUXGA 0.67" 1920 x 1200 resolution
• Projection lens compatibility:
• Horizontal offset ranges with half image size: +/-30%
• Vertical offset ranges with half image size: +/-100%
Measurements comply with industry standards where offset is calculated as a ratio of the
number of pixels shifted up or down to half image size.
• Operation at all orientations (a full 360 degrees in any axis)
• Full HD 3D technology with frame sequential up to 120Hz
• Support 2D high frame rate 1080P@120Hz
• Embedded warping, curve blending
Purchase record
Dealer:
Dealer or Christie Sales/Service contact phone number:
Projector serial number:
The serial number can be found on the license label located on the display panel
Purchase date:
Installation date:
Ethernet settings
Default gateway
Projector IP address
Subnet mask
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

14
Introduction
• Christie TwistTM and MystiqueTM allows for easy and quick blending and warping
• A wide range of connectivity including HDMI, HDBaseT, and 3G-SDI inputs
• Integrated HDBaseT solution support HD video streaming through RJ45
• SNMP traps and email notifications
• 10-bit image processor electronics with modular design
• All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio
• The projector can be operated using any of the following:
• The built-in keypad, the infrared (IR) remote keypad, a wired remote keypad, a PC/
device using serial communications (Ethernet or RS232)
• A web page using Ethernet or from a PC
How the projector works
The GS Series 2K projectors accept a variety of input signals for a wide range of commercial
projection applications.
Designed with solid-state illumination light sources and phosphor technology, the red, green and
blue color elements are segmented through a phosphor wheel and modulated by one Digital
Micromirror Device (DMD) panel responding to incoming data streams of digitized red, green, and
blue color information. As these digital streams flow from the source, light from the responding on
pixels of the DMD panel is reflected, converged, and projected to the screen through projection
lenses, where all pixel reflections are superimposed in sharp full-color images.
List of components
This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
• AC power cord
• IR remote keypad
• Product Safety Guide
Product documentation
For installation, setup, and user information, see the product documentation available on the
Christie Digital Systems USA Inc. website at www.christiedigital.com. Read all instructions before
using or servicing this product.
1. Access the documentation from the Christie website:
• Go to this URL: https://bit.ly/37SaOcN or
https://www.christiedigital.com/products/projectors/all-projectors/gs-series/
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

15
Introduction
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
• GS Series 2K Product Safety guide (P/N: 020-001960-XX)
• GS Series 2K Service guide (P/N: 020-001949-XX)
• GS Series 2K Serial Command guide (P/N: 020-103480-XX)
Technical support
Technical support for Christie Enterprise products is available at:
• North and South America: [phone] or [e-mail]
• Europe, Middle East, and Africa: [phone] or [email protected]om
• Asia Pacific ([email protected]):
• Australia: [phone] or [email protected]
• China: [phone] or [email protected]
• India: [phone] or [e-mail]
• Japan: 81-3-3599-7481
• Singapore: [phone] or [e-mail]
• South Korea: [phone] or [email protected]
• Christie Professional Services: [phone] or [email protected]
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

16
Introduction
Additional information
Lens type for WUXGA (DWU880-GS, DWU880A-GS, DWU1100-GS, DWU1100A-GS).
Platform WUXGA
DMD 0.67"
Lens type 140-
133108-
xx
140-
143109-
xx
140-
119102-
xx
140-
1491
05-xx
140-
101103-
xx
140-
131106-
xx
140-
102104-
xx
140-
107109-
xx
Throw Ratio 0.36 0.65 - 0.75 0.75 - 0.95 0.8 0.95 - 1.22 1.22 - 1.52 1.52 - 2.92 2.90 - 5.50
Projection
Lens Ultra Short Throw Short Throw Short Throw Short Throw Wide Zoom Standard Long Zoom Ultra-Long Zoom
Zoom Ratio No Zoom 1.15X 1.26X No Zoom 1.28X 1.25X 1.9X 1.9X
Throw
Distance 0.93
- 2.62m 0.68 - 4.95m 0.81 - 6.13m 1 - 3.5m 1.02 - 7.88m 1.29 - 9.93m 1.64 - 18.87m 3.12 - 35.54m
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

17
Installation and setup
Learn how to install, connect, and optimize the projector display.
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Physical operating environment
Provides specifications for the operating environment.
Power connection
The projector uses an AC power system allowing the projector to operate at full brightness with a
power supply of 100 to 240 VAC. Operating the device outside of the voltage range may cause
unsatisfactory operation or damage to the projector. To ensure safety operation, only use the AC
power cord provided with the product or recommended by Christie.
Item Specification
Ambient temperature (operating) 0 to 40°C (32 to 104°F) for 0 to 762 meters (0 to 2500 feet)
0 to 35°C (32 to 95°F) for 762 to 1524 meters (2500 to 5000 feet)
0 to 30°C (32 to 86°F) for 1524 to 3048 meters (5000 to 10,000 feet)
Storage temperature range -10 to 60°C (14 to 140°F)
Humidity range 10% to 85% RH (maximum), non condensing
Storage humidity range 5% to 90% RH (maximum), non condensing
Operating altitude 3048 meters (10,000 feet) maximum
Model name Power requirements
DWU880-GS / DWU880A-GS • 100 - 120 VAC, 50/60 Hz, 6.5 A
• 220 - 240 VAC, 50/60 Hz, 3.0 A
DWU1100-GS / DWU1100A-GS • 100 - 120 VAC, 50/60 Hz, 9.0 A
•220 - 240 VAC, 50/60 Hz, 4.0 A
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

18
Installation and setup
Projector components
Identify the main components of the projector.
Front view
Identify the main components on the front of the projector.
Rear view
Identify the main components on the rear of the projector.
ID Part name Description
1 Front IR sensor Receives signals from the IR remote keypad. Keep the signal path to the sensor
unobstructed for uninterrupted communication with the projector.
2 Projection lens Allows automated lens control and adjustment: vertical and horizontal offsets, zoom,
and focus.
3 Adjustable feet Raises or lowers the feet to level the projector.
ID Part name Description
1 Rear IR sensor Receives signals from the IR remote keypad. Keep the signal path
unobstructed for uninterrupted communication with the projector.
2 Input/Output (I/O) panel Connects the projector to external devices.
3 Built-in keypad Controls the projector.
4 AC input Connects to the supplied power adapter.
1
2
3
1
2
3
4
5
6
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

19
Installation and setup
Left view
Identify the main components on the left side of the projector.
Right view
Identify the main component on the right side of the projector.
5 Power button Powers the projector on or off.
6 Kensington Security Slot Secures the projector to help prevent theft or unauthorized removal.
ID Part name Description
1 Cooling air vents (intake) Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
ID Part name Description
1 Cooling air vents (exhaust) Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
ID Part name Description
1
1
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.

20
Installation and setup
Built-in keypad
The built-in keypad controls the projector.
ID Button Description
1 Auto Automatically optimizes an image.
2 Power Turns the projector on or off.
3 Shutter Displays or blanks the video image.
4 OSD Hides or shows the on-screen display (OSD) menus.
5 Help Displays the instructions for source connection. (Not supported)
6 Menu Displays the menus.
7 Arrow Keys Adjusts a setting up or down, or navigate within a menu.
8 Input Selects an input for the main or picture in picture/picture by picture (PIP/PBP) image.
9 Focus Adjusts the focus.
10 Lens Adjusts the lens vertical or horizontal offset setting.
11 Zoom Adjusts the zoom.
• Press the up arrow key to zoom in.
• Press the down arrow key to zoom out.
12 Back Returns to the previous level or exits the menus if at top level.
7
9
8
11
12
1
2
3
5
6
410
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022Christie Digital Systems USA Inc. All rights reserved.