adjust height, press the push pin on each leg and slide
the leg to the proper position. Always check that all 4
legs are the same height and that the push pins fully
protrude from the holes.
LOCK/UNLOCK SWIVEL WHEELS: Press down on the
green lever to lock wheel and lift to unlock. Make sure
that wheel clicks into place when locking the wheel.
NOTE: This feature is not available on models with 8” wheels.
ONE-DIRECTIONAL REAR WHEELS: To disengage
directional lock, raise aluminum pin and place into
override bracket.
ANTERIOR/POSTERIOR SETUP: Front and rear legs
can be interchanged to switch from posterior to
anterior use for all walkers other than KP210R, KP410R
and KP510R.
FOLD WALKER: Face walker from the open end, raise
front wheels so that walker is resting on rear
wheels/legs, press in latch push pins and push front legs
towards rear legs.
SEAT: Flip up seat when standing and walking. Fold
down seat for sitting and resting. When folding walker,
seat must be raised
Inspect your walker by checking all screws, nuts and
bolts regularly.
Keep your walker clean to ensure longevity and
comfort while using it. Mix warm water with a mild
detergent and gently scrub your walker. Wipe clean
with a dry soft cloth.