Cisco 800 Series User manual

Quick Start Guide
Cisco 800 Series Router Cabling and Setup
1Cisco One-Year Limited Hardware Warranty Terms
2Overview
3Parts List
4Verify the PC Setup
5Connect the Cisco 800 Series Router to a PC
6Connect the Cisco 800 Series Router to a Hub
7Connect an ISDN Line
8Connect Telephone, Fax Machine, or Modem
9Connect the Power and Turn On the Router
10 Verifying the LEDs
11 Obtaining Documentation
12 Documentation Feedback
13 Cisco Product Security Overview
14 Obtaining Technical Assistance
15 Obtaining Additional Publications and Information

2
1 Cisco One-Year Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use during the warranty period.
Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on
Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements
from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the Information Packet appears.
d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document
Format (PDF).
Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s
website: http://www.adobe.com
3. To read translated and localized warranty information about your product, follow these steps:
a. Enter this part number in the Warranty Document Number field:
78-10747-01C0
b. Select the language in which you would like to view the document.
c. Click Go.
The Cisco warranty page appears.
d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document
Format (PDF).
You can also contact the Cisco service and support website for assistance:
http://www.cisco.com/public/Support_root.shtml.
Duration of Hardware Warranty
One (1) Year
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after
receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco
Sales and Service Representative.

3
Complete the information below, and keep it for reference.
2 Overview
This document describes the basic process of cabling and configuring the Internet access device, the Cisco 800 series router. For
advanced cabling information, refer to the Cisco 800 Series Router Hardware Installation Guide. For advanced configuration
information, refer to the Cisco 800 Series Router Software Configuration Guide. These documents are available on Cisco.com.
3 Parts List
The shipment of your Cisco 800 series router includes the following items:
•One Cisco 800 series router
•One yellow Ethernet cable
•One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)
•One red ISDN U cable (Cisco 802 and Cisco 804 only)
•One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)
•One blue console cable
•One DB-9-to-RJ-45 adapter (for use with the blue console cable)
•One DB-25-to-RJ-45 adapter (for use with the blue console cable)
•One black power supply
•One black power supply cord
•Product Documentation
4 Verify the PC Setup
Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed
and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on
how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which
is available on Cisco.com.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number

4
5 Connect the Cisco 800 Series Router to a PC
Follow these steps to connect the Cisco 800 series router to a PC:
Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 802 routers) or from the yellow
Ethernet port with the number 0 (Cisco 803 and 804 routers) on the back panel of the router to the Ethernet port on
the NIC on the computer.
Figure 1 Connecting a Cisco 800 Series Router to a PC
Step 2 Verify that the HUB/NO HUB switch on the left side of the back panel has been set to the NO HUB position (out). If
the button is in, press it to set it to the out position.
Note The HUB/NO HUB button corresponds to the Ethernet port on Cisco 801 and 802 routers and to Ethernet
port 0 on Cisco 803 and 804 routers.
Step 3 For Cisco 803 and 804 routers, connect additional computers to the Cisco 800 series router by connecting Ethernet
cables from the Ethernet ports labeled with the numbers 1, 2, and 3 to the Ethernet ports on the computers.
Caution Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router. Do not connect
the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device. Accidently connecting the cable
to the wrong port can damage your router.
PC
SER 0
OK
LAN
AUXAUX
Cisco 803 router
HUB
NO HUB
PHONE
Cisco 803
3
2
1
0
ETHERNET 10 BASE T CONSOLE
12
ISDNS/T

5
6 Connect the Cisco 800 Series Router to a Hub
Follow these steps to connect the Cisco 800 series router to a hub:
Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 802 routers) or from the yellow
Ethernet port with the number 0 (Cisco 803 and 804 routers) on the back panel of the router to the Ethernet port on
the hub.
Figure 2 Connecting a Cisco 800 Series Router to a Hub
Step 2 Verify that the HUB/NO HUB switch on the left side of the back panel has been set to the HUB position (in). If the
button is out, press it to set it to the in position.
Note The HUB/NO HUB button corresponds to the Ethernet port on Cisco 801 and 802 routers and to Ethernet
port 0 on Cisco 803 and 804 routers.
Caution Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router. Do not connect
the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device. Accidently connecting the cable
to the wrong port can damage your router.
Cisco 803 router
HUB
NO HUB
PHONE
Cisco 803
3
2
1
0
ETHERNET 10 BASE T CONSOLE
12
ISDN S/T
Cisco 1528 Micro Hub 10/100
1
SPEED
100BaseTX
10BaseT
LED
SOLID
BLINK
234
5678
MDI MDI-X
5X6
X7X8
X
1X2X3X4X
10/100

6
7 Connect an ISDN Line
Refer to the section corresponding to your router model and follow the steps to connect the Cisco 800 series router to an ISDN
line.
•Option A—Connecting Cisco 801 and Cisco 803 Routers
•Option B—Connecting Cisco 802 and Cisco 804 Routers
Caution Always connect the orange cable to the orange ISDN S/T port and the red cable to the red ISDN U port on the
router. Do not connect either cable to the yellow Ethernet port. Accidently connecting these cables to the wrong
port can damage your router.
Option A—Connecting Cisco 801 and Cisco 803 Routers
This section describes how to connect Cisco 801 and Cisco 803 routers outside of North America. For information on
connecting these routers in North America, see the Cisco 800 Series Routers Hardware Installation Guide.
Figure 3 Connecting an 801 or 803 Router to an ISDN Line
Step 1 Connect the orange cable to the orange ISDN S/T port.
Step 2 Connect the other end of the cable to the ISDN wall jack.
HUB
NO HUB
PHONE
Cisco 803
3
2
1
0
ETHERNET 10 BASE T CONSOLE
12
ISDNS/T
ISDN wall jack
Cisco 803 router

7
Option B—Connecting Cisco 802 and Cisco 804 Routers
Figure 4 Connecting an 802 or 804 Router to an ISDN Line
Step 1 Connect the red cable to the red ISDN U port.
Step 2 Connect the other end of the cable to the ISDN wall jack. If your wall jack has an RJ-11 connector, attach the
RJ-45-to-RJ-11 adapter cable to the red cable, and then connect the RJ-11 connector to the ISDN wall jack.
HUB
NO HUB
PHONE
12
Cisco 804
3
2
1
0
ETHERNET 10 BASE T CONSOLE ISDN U
Cisco 804 router
ISDN wall jack
RJ-45-to-RJ-11
adapter cable

8
8 Connect Telephone, Fax Machine, or Modem
If you have a Cisco 803 or Cisco 804 router, you can connect a touch-tone telephone, fax machine, or modem. Use the cables
provided with these devices.
The gray PHONE 1 and PHONE 2 ports are RJ-11 connectors. If you are outside of North America, you must buy and attach
adapters that allow your telephones, faxes, or modems to be connected to these RJ-11 connectors. In some countries, these
adapters need additional electronics to convert the telephones, faxes, or modems to work properly with the router phone ports.
For example, in the United Kingdom, you must buy an adapter that also provides a master socket, which causes incoming calls
to ring the connected devices. For information on recommended master sockets, see the Cisco 800 Series Routers Hardware
Installation Guide.
Caution Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct
connection to the public network. This connection can damage your router.
Figure 5 Connecting an 800 Series Router to a Telephone
Step 1 Connect one end of the telephone cable to the gray PHONE 1 or PHONE 2 port. If you are connecting only one device,
use the PHONE 1 port.
Step 2 Connect the other end of the cable to your device.
HUB
NO HUB
PHONE
12
Cisco 804
3
2
1
0
ETHERNET 10 BASE T CONSOLE ISDN U
Analog telephone
Cisco 804 router

9
9 Connect the Power and Turn On the Router
Follow these steps to connect power to the Cisco 800 series router and turn it on.
Figure 6 Connecting the Power to an 800 Series Router
Step 1 Make sure the router power is off.
Step 2 Set the power switch to the STANDBY ( ) position.
Step 3 Connect the power supply cable to the 8-pin connector on the router.
Step 4 Connect the power cord to the desktop power supply.
Step 5 Connect the other end of the power cord to an electrical outlet.
Step 6 Turn ON the router. Press the power switch to on (|).
10 Verifying the LEDs
Verify the power connection and all other connections (links) by checking the LEDs in the table below. If the LEDs are not on,
see the troubleshooting information in the Cisco 800 Series Routers Hardware Installation Guide.
Power/Link LEDs To Check Normal Patterns
Power OK On
To hub, server, PC, or workstation Cisco 801 or Cisco 802 back panel:
LINK LED
Cisco 803 or Cisco 804 front panel:
LKØ, LK1, LK2, and LK3 LEDs
On
To ISDN network using ISDN S/T port LINE, CH1, or CH2 On. CH1 or CH2 is on only when the router
has an active voice or data connection.
To ISDN network using ISDN U port NT1, LINE, CH1, or CH2 On. CH1 or CH2 is on only when the router
has an active voice or data connection.
To telephone, fax, or modem PH1 or PH2
You can also pick up the handset and
listen for a dial tone.
On. PH1 or PH2 is on only when telephone,
fax, or modem is in use.
HUB
NO HUB
PHONE
Cisco 803
3
2
1
0
ETHERNET 10 BASE T CONSOLE
12
ISDN S/T
Desktop power supply
To electrical outlet

10
11 Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical
assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/cisco/web/psa/default.html?mode=prod
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Documentation DVD
Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with
your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The
Documentation DVD package is available as a single unit.
Registered Cisco.com users (Cisco direct customers) can order a Cisco Documentation DVD (product number
DOC-DOCDVD=) from the Ordering tool or Cisco Marketplace.
Cisco Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
Cisco Marketplace:
http://www.cisco.com/go/marketplace/
Ordering Documentation
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems
Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS
(6387).
12 Documentation Feedback
You can send comments about technical documentation to [email protected].
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the
following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.