Cisco CGR 1120 User manual

CHAPTER
1-1
Cisco Connected Grid Device Manager Installation and User Guide
OL-28081-01
1
Introduction
This chapter provides an overview of the Cisco Connected Grid Device Manager (Device Manager) and
includes the following sections:
•Overview, page 1-1
•Additional Information, page 1-4
Overview
This section includes the following topics:
•Application
•Tasks
Application
The Cisco Connected Grid Device Manager (Device Manager) is a Windows-based application that field
technicians can use to manage the Cisco 1000 Series Connected Grid Routers (CGR 1000) remotely.
Cisco CG-NMS manages multiple CGR 1000 routers whereas the Device Manager connects and
manages a single CGR 1000 at a time.
Cisco CGR 1000 routers are multi-service communications platforms designed for use in field area
networks. The portfolio consists of two models–Cisco CGR 1240 and Cisco CGR 1120–both ruggedized
to varying degrees for outdoor and indoor deployments. Both models are modular and support a
wide-range of communications interfaces such as 2G/3G, Ethernet, and WiFi.
Device Manager connects to the Cisco CGR 1000 by using a secure Ethernet or WiFi link. See Figure 1-1

1-2
Cisco Connected Grid Device Manager Installation and User Guide
OL-28081-01
Chapter 1 Introduction
Overview
Figure 1-1 Device Manager Application Within a Connected Grid Network
Tasks
The Device Manager enables you to:
•Troubleshoot connectivity between a CGR 1000 and the devices connected to the router.
See Test Connectivity, page 3-6
•Bring up or shut down an CGR 1000 interface.
See Manage Interfaces, page 3-11
•Check and update the current CGR 1000 configuration.
See Advanced Command, page 3-23 and Change Configuration, page 3-15
•Update the CGR 1000 image and reset the router.
See Update Image, page 3-18
•View real-time CGR 1000 configuration information for troubleshooting.
See Retrieve Report, page 3-21
•Use advanced commands to troubleshoot the CGR 1000.
See Advanced Command, page 3-23
You initiate all tasks from the At a Glance page. See Figure 1-2
IPSec Tunnel
IPSec Tunnel
303104
CGR 1240
Router
Head-end
Router
Head-end
RPDON server
CG-NMS
IPv4/IPv6
LAN
IPv6 link 6LoWPANs
Field Technician with
Device Manager
Field Technician with
Device Manager
Metering Data
Collection System
CGR 1240
Router
IPv4 link
IPv4 link
Utility
Network

1-3
Cisco Connected Grid Device Manager Installation and User Guide
OL-28081-01
Chapter 1 Introduction
Overview
Figure 1-2 At a Glance Page for the CGR 1120
In addition to supported tasks (right-side), the At a Glance page provides a view of the CGR 1000 router
to which the Device Manager is connected (left-side).
At the bottom of the page, you can find the following information:
•Name of the router
•Version of the software
•Model number of the CGR 1000
•Serial number of the CGR 1000
•Door status of the system casing, (Open or Closed) for the router (CGR 1240 only)
•Battery status, when an optional backup battery is installed (CGR 1240 only)
•Slots within the system and modules installed in those slots (CGR 1120 only)
•Storage status including amount of storage available
•Connection method of the Device Manager to the CGR 1000 (WiFi or Ethernet)
•Certificate status
•Authorization indicates the user role of the connected user
Tip To refresh the At a Glance page, click the Refresh icon (lower right-side).

1-4
Cisco Connected Grid Device Manager Installation and User Guide
OL-28081-01
Chapter 1 Introduction
Additional Information
Additional Information
You can find configuration guides and release notes for Cisco 1000 Series Connected Grid products at:
www.cisco.com/go/cgr1000-docs