Cisco D9854 Operator's manual

CiscoD9854/D9854-I Advanced
Program Receiver Software Version
4.50 Installationand Configuration
Guide

Please Read This Entire Guide
Veuillez lire entièrement ce guide
Bitte das gesamte Handbuch durchlesen
Sírvase leer completamente la presente guía
Si prega di leggere completamente questa guida
Important
Please read this entire guide before you install or operate this product. Give
particular attention to all safety statements.
Important
Veuillez lire entièrement ce guide avant d'installer ou d'utiliser ce produit. Prêtez
une attention particulière à toutes les règles de sécurité.
Zu beachten
Bitte lesen Sie vor Aufstellen oder Inbetriebnahme des Gerätes dieses Handbuch in
seiner Gesamtheit durch. Achten Sie dabei besonders auf die Sicherheitshinweise.
Importante
Sírvase leer la presente guía antes de instalar o emplear este producto. Preste
especial atención a todos los avisos de seguridad.
Importante
Prima di installare o usare questo prodotto si prega di leggere completamente questa
guida, facendo particolare attenzione a tutte le dichiarazioni di sicurezza.

Notices
Trademark Acknowledgments
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its
affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
The DVB logo is a registered trademark of the DVB Project.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Publication Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or omissions that may
appear in this publication. We reserve the right to change this publication at any
time without notice. This document is not to be construed as conferring by
implication, estoppel, or otherwise any license or right under any copyright or
patent, whether or not the use of any information in this document employs an
invention claimed in any existing or later issued patent.
Copyright
© 2014 Cisco and/or its affiliates. All rights reserved.
Information in this publication is subject to change without notice. No part of this
publication may be reproduced or transmitted in any form, by photocopy,
microfilm, xerography, or any other means, or incorporated into any information
retrieval system, electronic or mechanical, for any purpose, without the express
permission of Cisco Systems, Inc.

AVC/MPEG-4/H.264 Products
With respect to each AVC/MPEG-4/H.264 product, Cisco is obligated to provide the
following notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE
FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)
ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO")
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,
L.L.C. SEE HTTP://WWW.MPEGLA.COM.
Accordingly, please be advised that service providers, content providers and
broadcasters are required to obtain a separate use license from MPEG LA prior to
any use of AVC/MPEG-4/H.264 encoders and/or decoders.

Safety Precautions
v
Safety Precautions
1Read Instructions –All the safety and operating instructions should be read
before the product is operated.
2Retain Instructions –The safety and operating instructions should be retained for
future reference.
3Heed Warnings –All warnings on the product and in the operating instructions
should be adhered to.
4Follow Instructions –All operating and use instructions should be followed.
5Cleaning –Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Exception: A product that is meant for uninterrupted service and that, for some
specific reason, such as the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the product in the
cleaning description above.
6Attachments –Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7Water and Moisture –Do not use this product near water –for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
Accessories –Do not place this product on an unstable cart, stand, tripod,
bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious
damage to the product.

Safety Precautions
vi
Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
8A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
9Ventilation –Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s instructions
have been adhered to.
10 Power Sources –This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instructions.
11 Grounding or Polarization –This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug. Alternate Warnings –
This product is equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
12 Power-Cord Protection –Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.

Safety Precautions
vii
13 Protective Attachment Plug –The product is equipped with an attachment plug
having overload protection. This is a safety feature. See Instruction Manual for
replacement or resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by
the manufacturer that has the same overload protection as the original plug.
14 Outdoor Antenna Grounding –If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
15 Lightning –For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
16 Power Lines –An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
17 Overloading –Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
18 Object and Liquid Entry –Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the
product.

Safety Precautions
viii
19 Servicing –Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
20 Damage Requiring Service –Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
aWhen the power-supply cord or plug is damaged,
bIf liquid has been spilled, or objects have fallen into the product,
cIf the product has been exposed to rain or water,
dIf the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation,
eIf the product has been dropped or damaged in any way, and
fWhen the product exhibits a distinct change in performance –this indicates a
need for service.
21 Replacement Parts –When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
22 Safety Check –Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
23 Wall or Ceiling Mounting –The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
24 Heat –The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
Protect yourself from electric shock and your system from damage!
This product complies with international safety and design standards. Observe
all safety procedures that appear throughout this guide, and the safety symbols
that are affixed to this product.
If circumstances impair the safe operation of this product, stop operation and
secure this product against further operation.
Avoid personal injury and product damage! Do not proceed beyond any symbol
until you fully understand the indicated conditions!
You will find this symbol on the product and/or in the literature that
accompanies this product.
It indicates important operating or maintenance instructions.

Safety Precautions
ix
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates a live terminal; the symbol pointing to the terminal device.
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates a protective earth terminal.
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates excessive or dangerous heat.
Power
Important! This is a Class I product. You must earth this product. This
equipment may have up to two power supply cords. To reduce the risk of
electric shock, two power supply cords may have to be disconnected before
servicing.
This product plugs into a socket-outlet. The socket-outlet must be near this
product, and must be easily accessible.
Connect this product only to the power source that is indicated on the rear panel
of this product.
If this product does not have a mains power switch, the power cord serves this
purpose
Enclosure
Do not allow moisture to enter this product.
Do not open the enclosure of this product unless otherwise specified.
Do not push objects through openings in the enclosure of this product.
Cables
Always disconnect all power cables before servicing this product.
Always pull on the plug or the connector to disconnect a cable. Never pull on the
cable itself.
Do not walk on or place stress on cables or plugs.
Factory service
Refer service only to service personnel who are authorized by the factory.

Safety Precautions
x
Règles de sécurité
Protégez-vous des risques d'électrocution et protégez votre système contre les
endommagements éventuels.
Ce produit respecte les standards internationaux de sécurité et de conception.
Veuillez observer toutes les procédures de sécurité qui apparaissent dans ce guide,
ainsi que les symboles de sécurité qui figurent sur le produit.
Si, du fait des circonstances, ce produit cesse de fonctionner normalement, cessez de
l'utiliser et empêchez-en l'utilisation future.
Évitez le risque de blessures et de dommages aux produits! Ne procédez à aucune
tâche tant que vous n'aurez pas entièrement assimilé les conditions indiquées par un
symbole!
Ce symbole figure dans la documentation accompagnant ce produit. Il indique
d'importantes instructions de fonctionnement ou d'entretien.
Ce symbole peut être attaché à ce produit. Il indi que une borne sous tension;
la direction indique la borne.
Ce symbole peut être attaché à ce produit. Il indique une borne de terre de
protection.
Ce symbole peut être attaché à ce produit. Il indique une température
excessive ou dangereuse.
Alimentation
Important! Ce produit fait partie de la classe I. Vous devez le mettre à la terre.
Ce produit se branche dans une prise murale. Cette dernière doit être placée à
proximité du produit et doit être facilement accessible.
Ne branchez ce produit qu'à la source d'alimentation indiquée sur son panneau
arrière.
Si ce produit n'a pas d'interrupteur d'alimentation générale, le cordon
d'alimentation remplit ce rôle.
Enceinte
Ne laissez pas l'humidité pénétrer dans ce produit.
N'ouvrez pas l'enceinte de ce produit, sauf instructions contraires.
Ne forcez pas d'objets dans les ouvertures du boîtier.
Câbles
Débranchez toujours tous les cordons d'alimentation avant de réparer ce produit.
Tirez toujours sur la prise ou le connecteur pour débrancher un câble. Ne tirez
jamais directement sur le câble.

Safety Precautions
xi
Ne marchez pas sur les câbles ou les prises et n'y exercez aucune pression.
Réparations effectuées à l'usine
Ne confiez les travaux de réparations qu'au personnel autorisé par l'usine.
Sicherheitsvorkehrungen
Schützen Sie sich gegen elektrischen Schlag, und Ihr Gerät gegen Beschädigung!
Dieses Gerät entspricht internationalen Sicherheits-und Ausführungsnormen.
Beachten Sie alle in diesem Handbuch enthaltenen Sicherheitshinweise sowie die
am Gerät angebrachten Warnzeichen.
Sollten örtliche Umstände den sicheren Betrieb dieses Gerätes beeinträchtigen,
schalten Sie es ab und sichern es gegen weitere Benutzung.
Vermeiden Sie Verletzungen sowie Beschädigung des Gerätes! Wenn Sie zu einem
der folgenden Warnzeichen gelangen, nicht weiterarbeiten, bis Sie seine Bedeutung
voll verstanden haben!
Dieses Symbol erscheint auf dem Gerät und/oder in der ihm beiliegenden
Literatur. Es bedeutet wichtige, zu beachtende Betriebs-oder
Wartungsanweisungen.
Wenn dieses Zeichen am Gerät angebracht ist, warnt es vor einer
spannungsführenden Stelle.
Dieses Symbol kennzeichnet auf dem Gerät die Anschlußstelle der
Sicherheitserde.
Wenn dieses Zeichen am Gerät angebracht ist, warnt es vor heißen Stellen, die
zu Verbrennungen führen können.
Netzspannung
Wichtig! Dieses Gerät ist ein Produkt der Schutzklasse I. Es muß geerdet werden.
Das Gerät ist an einer Steckdose anzuschließen. Diese muß sich leicht zugänglich
in unmittelbarer Nähe des Gerätes befinden.
Die Netzversorgung muß den auf der Rückwand des Gerätes angegebenen
Werten entsprechen.
Falls sich kein Hauptschalter am Gerät befindet, dient das Netzkabel diesem
Zweck.
Gehäuse
Das Innere des Gerätes ist vor Feuchtigkeit zu schützen.
Das Gehäuse ist nicht zu öffnen.
Niemals einen Gegenstand durch die Gehäuseöffnungen einführen!

Safety Precautions
x ii
Kabel
Vor jeglicher Wartung des Gerätes sind alle Kabel zu entfernen.
Hierzu grundsätzlich am Stecker oder Verbindungsstück und niemals am Kabel
selber ziehen.
Nicht auf die Kabel oder Stecker treten oder diese einer Zugbelastung aussetzen.
Hersteller-Wartung
Wartungsarbeiten sind nur durch vom Hersteller autorisierte Techniker
vorzunehmen.
Precauciones de seguridad
¡Protéjase contra la electrocución y proteja su sistema contra los daños!
Este producto cumple con los criterios internacionales de seguridad y diseño.
Observe todas los procedimientos de seguridad que aparecen en esta guía, y los
símbolos de seguridad adheridos a este producto.
Si las circunstancias impiden la operación segura de este producto, suspenda la
operación y asegure este producto para que no siga funcionando.
¡Evite lastimarse y evite dañar el producto! No avance más allá de cualquier símbolo
hasta comprender completamente las condiciones indicadas!
Encontrará este símbolo en el impreso que acompaña a este producto. Este símbolo
indica instrucciones importantes de funcionamiento o mantenimiento.
Es posible que este símbolo esté pegado al producto. Este símbolo indica un
terminal vivo, la flecha apunta hacia el aparato terminal.
Podría encontrar este símbolo pegado al producto. Este símbolo indica un terminal
de protección de tierra.
Podría encontrar este símbolo pegado al producto. Este símbolo indica calor
excesivo o peligroso.
Alimentación
Importante! Este es un producto de Clase I. Tiene que estar conectado a tierra.
Este producto se conecta a un enchufe. El enchufe necesita estar cerca del
producto y ser fácilmente accesible.
Conecte este producto únicamente a la fuente de suministro eléctrico indicada en
el panel posterior del producto.
Si el producto no tiene interruptor para la linea principal, utilice el cordón toma
de corriente para este propósito.

Safety Precautions
x iii
Cubierta
No permita que la humedad penetre en este producto.
No abra la cubierta del producto a menos que se indique lo contrario.
No introduzca objetos a través de las aberturas de la cubierta del producto.
Cables
Siempre desconectar todos los cables eléctricos antes de revisar o reparar el
producto.
Tire siempre del enchufe o del conector para desconectar un cable. Nunca tire del
cable mismo.
No camine ni aplique presión sobre los cables o enchufes..
Revisión y reparación de fábrica
Solo personal aprobado por la fábrica puede darle servicio al producto.
Precauzioni di sicurezza
Proteggetevi da scosse elettriche e proteggete il vostro sistema da possibili danni!
Questo prodotto soddisfa le norme internazionali per la sicurezza ed il design.
Seguite tutte le procedure di sicurezza contenute in questa guida e i simboli di
sicurezza applicati al prodotto.
Se circostanze avverse compromettono la sicurezza d'uso di questo prodotto,
interrompetene l'uso e assicuratevi che il prodotto non venga più utilizzato.
Evitare infortuni alla persona e danni al prodotto! Non procedere oltre a qualunque
simbolo fino a quando non si siano comprese pienamente le condizioni indicate!
Questo simbolo, che appare nella letteratura di accompagnamento del
prodotto, indica importanti istruzioni d'uso e di manutenzione.
Sul prodotto potete vedere questo simbolo che indica un dispositivo terminale
sotto tensione; la freccia punta verso il dispositivo.
Potrete trovare il presente simbolo applicato a questo prodotto. Questo
simbolo indica un terminale protettivo di messa a terra.
Potrete trovare il presente simbolo attaccato a questo prodotto. Questo
simbolo indica un calore eccessivo o pericoloso.
Alimentazione
Importante! Questo prodotto è di Classe I. Va messo a terra.
Questo prodotto si inserisce in una presa di corrente. La presa di corrente deve
essere in prossimità del prodotto, e deve essere facilmente accessibile.

Safety Precautions
x iv
Collegare questo prodotto solamente alla fonte di alimentazione indicata sul
pannello posteriore di questo prodotto.
Se questo prodotto non è dotato di un interruttore principale, il cavo di
alimentazione funge a questo scopo.
Chiusura
Proteggete da umidità questo prodotto.
Non aprire la chiusura di questo prodotto a meno che non sia specificato
diversamente. Non inserire oggetti attraverso le fessure della chiusura.
Cavi
Staccare sempre tutti i cavi di alimentazione prima di svolgere l'assistenza
tecnica al prodotto.
Per scollegare un cavo tirate la spina o il connettore, non tirare mai il cavo stesso.
Non calpestare o sottoporre a sollecitazioni i cavi o le prese.
Riparazionoi di fabbrica
Per le riparazioni contattate solamente personale tecnico autoizzato dalla
fabbrica.

Contents
Safety Precautions v
About This Guide xxiii
Objective.............................................................................................................xxiii
Audience ............................................................................................................xxiii
Required Knowledge.........................................................................................xxiii
Chapter 1 Introduction 1
D9854/D9854-I Advanced Program Receiver...................................................................2
Key Features............................................................................................................2
Transport Stream Inputs/Outputs.....................................................................................5
DVB-ASI Output.....................................................................................................5
MPEGoIP Output ...................................................................................................5
MPE Output............................................................................................................5
HD-SDI Outputs.....................................................................................................6
MPEGoIP Input.......................................................................................................6
Disaster Recovery................................................................................................................8
Local Settings ..........................................................................................................8
Uplink Profile Settings ...........................................................................................9
NIT Retune Recovery ........................................................................................................11
Chapter 2 Quick Setup - Read Me First! 13
Connecting the Receiver to Other Equipment ................................................................14
Maintenance of EMC Compliance.......................................................................15
Setting up for Network Connection.................................................................................16
Quick Setup Instructions for RF Acquisition ..................................................................17
Assigning a Program Channel to a PE (Program Entry) ................................................19
ASI Out...............................................................................................................................20
Setting up the HD-SDI Outputs (SDI Model, with SD/HD-SDI and AES outputs)....21
Setting up the MOIP Outputs...........................................................................................22
Setting the DPM Mode......................................................................................................23
Chapter 3 Installation 25
Rack Installation ................................................................................................................26
Power Connection ................................................................................................26
Mechanical Loading .............................................................................................26
Elevated Operating Ambient Temperature ........................................................26

x vi
Equipotential Bonding .........................................................................................27
Installing the D9854/D9854-I Receiver............................................................................28
Rack Mounted.......................................................................................................28
Cooling ..................................................................................................................28
Grounding .............................................................................................................28
Mounting the D9854/D9854-I Receiver to a Rack..............................................28
Connecting AC Power to the D9854/D9854-I Receiver.....................................29
D9854/D9854-I Receiver Rear Connector Pa nel .............................................................30
Connecting the Input/Output Signals.............................................................................32
Connecting the RF Inputs ....................................................................................32
Connecting the ASI Input ....................................................................................32
Connecting t he Video Outputs ............................................................................32
Connecting the Audio Outputs ...........................................................................33
Connecting the Ethernet Management Interface................................................34
Connecting the IP TS Input/Output ...................................................................34
Connecting the ASI Output .................................................................................34
External Alarm System Connector ......................................................................35
Connecting the RS-232 Data Interface.................................................................35
Cue Tone/Cue Trigger Interface .........................................................................36
Configuring Open-collector Outputs..................................................................37
Setting Admin User Privileges via a Telnet/SSH Connection.......................................38
Administrator User Privileges .............................................................................38
Starting a Telnet/SSH Session .............................................................................38
Adding a New User..............................................................................................39
Deleting a User......................................................................................................39
Changing a Username ..........................................................................................39
Changing a Password (allowed by all Users) .....................................................40
Printing the List of Users......................................................................................40
Resetting the Login Credentials ..........................................................................40
Common Interface Modules .............................................................................................41
Chapter 4 Front Panel Operation 43
About the Front Panel .......................................................................................................44
LCD........................................................................................................................44
Keypad ..................................................................................................................44
CI Slots...................................................................................................................44
Front Panel LEDs..................................................................................................44
Navigation/Selection Keypad .............................................................................45
Locking/U nlocking the Front Panel ................................................................................48
Startup Screen....................................................................................................................49
Main Structure ......................................................................................................49
Channel Authorization Status .............................................................................49
LCD Panel .............................................................................................................49
LCD Symbol ..........................................................................................................50
Assigning Program to the Program Entry ..........................................................51
Deleting a Program from the Program Entry .....................................................52

Main Menu.........................................................................................................................53
Status Menu .......................................................................................................................54
Status Menu: General ...........................................................................................55
Status Menu: Services ...........................................................................................56
Status Menu: TS Input ..........................................................................................59
Status Menu: TS Output.......................................................................................64
Status Menu - IP....................................................................................................64
Status Menu - D/R ...............................................................................................67
Setup Menu........................................................................................................................70
Setup Menu: Admin .............................................................................................71
Setup Menu: TS Input...........................................................................................76
Setup Menu: IP......................................................................................................87
Setup Menu: Services ...........................................................................................95
Setup Menu: Common Interface (CI) ................................................................108
Setup Menu: Outputs.........................................................................................112
Setup Menu: CA .................................................................................................137
Setup Menu: Alarm/Warning ...........................................................................139
Setup Menu: Noise Cutoffs ................................................................................141
Setup Menu: D/R ...............................................................................................143
About Menu.....................................................................................................................147
General ................................................................................................................147
Licenses ...............................................................................................................148
Features ...............................................................................................................148
Versions Menu.................................................................................................................149
Diagnostics Menu............................................................................................................152
Alarms/Warnings ..............................................................................................152
Logs......................................................................................................................152
PSI - Frequency Plan...........................................................................................153
PSI - Channels .....................................................................................................153
PSI - Tables ..........................................................................................................154
Power On.............................................................................................................154
Health Monitor ...................................................................................................155
Chapter 5 Web GUI Setup and Monitoring 157
Logging On to the Web Interface ...................................................................................158
D9854/D9854-I Summary Overview .............................................................................159
Shortcuts..............................................................................................................159
Modules...............................................................................................................160
Auto-Refresh .......................................................................................................160
Alarms/Warnings ..............................................................................................160
D9854/D9854-I Menus....................................................................................................162
D9854/D9854-I Web GUI Environment ........................................................................164
Window Buttons .................................................................................................164
Setting up Input Information .........................................................................................165
Setting up the RF Input ......................................................................................165
Validating the Orbital Position ..........................................................................167

x viii
Reacquiring the Network Information..............................................................168
Viewing the Current Input Status .....................................................................168
Setting up the ASI Input.....................................................................................170
Configuring the IP Input ....................................................................................171
Setting up SI Receive Parameters ......................................................................178
Setting up Muting Threshold Controls .............................................................181
Viewing the Input Status....................................................................................183
Configuring the Disaster Recovery Settings .....................................................183
Viewing the Disaster Recovery Status ..............................................................187
Setting up the Channel Selections .....................................................................192
Viewing the Channel Status...............................................................................193
Configuring the Common Interface (CI) Information .....................................195
Viewing the Common Interface (CI) Status......................................................199
Viewing the CA Status .......................................................................................200
Setting up the BISS Mode...................................................................................201
Viewing the PSI Tables .......................................................................................202
Viewing PSI Frequency Table Information.......................................................203
Viewing the PSI Channels..................................................................................204
Viewing the PID Input Status............................................................................205
Setting up Audio and Video Information......................................................................206
Setting up the Video Parameters .......................................................................206
Setting up Captions ............................................................................................208
Setting up Subtitles .............................................................................................209
Setting up the VBI ...............................................................................................211
Setting up Audio Parameters .............................................................................212
Setting up Cueing Parameters ...........................................................................217
Setting up Cue Tone Test ...................................................................................219
Setting up Cue Tones..........................................................................................220
Setting up SDI .....................................................................................................221
Setting up Services to be Decoded by the D9854/D9854-I Receiver...............223
Configuring Transport Stream Information..................................................................224
Configuring the ASI Output ..............................................................................224
Configuring the DP M ASI Details .....................................................................230
Viewing the ASI Output Transport Status........................................................236
Configuring the MPEGoIP Output....................................................................237
Configuring the DPM MPEGoIP Output Details .............................................251
Viewing the MPEG Output Transport Status...................................................258
Typical set up for Digital Program Mapping (DPM) .......................................258
Configuring System Settings ..........................................................................................261
Viewing the System Identification ....................................................................261
Viewing Hardware Features and Software License Information ...................262
Setting up IP Information...................................................................................263
Setting up IP Unicast Routing Information ......................................................269
Configuring the MPE Settings ...........................................................................271
Setting up SNMP Information and Trap Destinations ....................................273
Configuring Time/Clock Settings .....................................................................275
Viewing the Alarm/Warning Status.................................................................277

Setting up Alarms and Warnings ......................................................................279
Viewing Alarm/Warning History ....................................................................282
Viewing Version Information ............................................................................283
Setting up Import/Export File Information .....................................................287
Setting up Import/Export FTP Information.....................................................288
Managing D9854/D9854-I Web GUI Accounts................................................290
Configuring Lock Level Settings .......................................................................294
Configuring Front Panel Settings ......................................................................296
Viewing Support Information ........................................................................................297
Viewing Contact Information ............................................................................297
Viewing Diagnostic Logs ...................................................................................298
Viewing the Usage Counters .............................................................................299
Viewing Operating Board Temperatures .........................................................300
Viewing Alarm/Warning History ....................................................................301
Loading a Software Version...............................................................................302
Chapter 6 Service and Maintenance 305
D9854/D9854-I Receiver Alarm Messages ....................................................................306
Alarms .................................................................................................................306
Warnings .............................................................................................................347
Chapter 7 Customer Information 369
Appendix A Technical Specifications 371
L-Band Input and Processing .........................................................................................372
General ................................................................................................................372
LNB LO Stability.................................................................................................372
LNB Power and Control.....................................................................................373
DVB-S/DVB-S2...................................................................................................373
Video Inputs/Outputs and Processing..........................................................................376
General ................................................................................................................376
Video Outputs.....................................................................................................376
Embedded Data in SDI .......................................................................................379
Audio Outputs....................................................................................................380
Conditional Access .............................................................................................380
Transport Stream Inputs/Outputs.................................................................................381
ASI Output..........................................................................................................381
MPEGoIP Output ...............................................................................................381
MPE Output........................................................................................................382
MPEGoIP Input (D9854-I only) .........................................................................382
ASI Input.............................................................................................................383
Control, Management and Data Interfaces ...................................................................384
Ethernet Management Interface ........................................................................384
Ethernet Data Interface.......................................................................................384

xx
RS-232 Data Interface .........................................................................................384
Alarm Interface ...................................................................................................384
Contact Closure Interface...................................................................................385
Power and General Specifications ..................................................................................386
General ................................................................................................................386
Power...................................................................................................................386
Mechanical ..........................................................................................................387
Environment .......................................................................................................387
Appendix B Default Settings and Lock Levels 389
Factory Default Settings and Lock Levels .....................................................................390
Administration....................................................................................................390
ASI Input.............................................................................................................391
RF Input ...............................................................................................................391
IP Input................................................................................................................392
Tune Mode ..........................................................................................................393
Disaster Recovery ...............................................................................................393
IP..........................................................................................................................394
Trap Destinations ...............................................................................................395
Protocols ..............................................................................................................395
Video....................................................................................................................395
Audio...................................................................................................................396
VBI .......................................................................................................................396
Subtitles ...............................................................................................................396
Decode .................................................................................................................397
CI..........................................................................................................................397
Cueing .................................................................................................................397
TS Out - ASI........................................................................................................398
TS Out - MOIP ....................................................................................................398
DPM - ASI ...........................................................................................................399
Options ................................................................................................................401
Alarm/Warning..................................................................................................401
Noise Cutoff ........................................................................................................402
DPM Default Settings for Different Output Modes ......................................................403
Appendix C Compliance 407
Applicable Standa rds and Notices .................................................................................408
Safety ...................................................................................................................408
EMC .....................................................................................................................408
Electromagnetic Compatibility Regulatory Requirements ..............................408
FCC Notices ........................................................................................................409
Industry Canada Notice .....................................................................................409
Unauthorized Modifications ..............................................................................409