Cisco WVC80N User manual

Package Contents
• Wireless-NInternet
HomeMonitoringCamera
• Camerastand/wallmount
• Setupsoftwareand
UserGuideonCD-ROM
• QuickInstallationGuide
• Networkcable
• Poweradapter
Wireless-N Internet Home Monitoring Camera
Quick Installation Guide
Model:WVC80N

Installation
A. Insert the Setup CD-ROM into
your CD-ROM drive.
B. Click Start Setup, then click
Next.
C. Click Next.
D. Select I accept this agreement,
then click Next.

E. Please wait while the Wizard
identifies the devices on your
network. When it has finished,
click Next.
F. Follow the on-screen
instructions to connect the
Camera.
G. Please wait while the Wizard
searches for the Camera.
H. Enter a username and password
for the Camera. The username
and password may only
contain letters, numbers, or the
underscore ( _) character. When
you have finished, click Next.

I. Choose a descriptive name for
your camera and enter it in the
Friendly Name field.
If you would like to save the
Camera’s settings to a text file
on your desktop, select Save
settings to your desktop. Click
Next.
J. Please wait while the Wizard
configures your settings.
K. The Wizard now guides you
through the wireless setup. Click
Next.
L. If the wizard is able to
automatically retrieve your
router’s settings, you will see
this screen. If you would like to
use this network, click Next and
go to Step O.
If you do not see this screen,
or you would like to connect
to a different network, select
I would like to connect to a
different network and click
Next. Go to step M.

M. The Wizard searches for
available wireless networks.
When it has finished, select your
wireless network and click Next.
N. If your network uses wireless
security, the Enter Wireless
Network Security Key screen
appears. Enter your password in
the Security Key field and click
Next.
If your network does not use
wireless security, go to step O.
O. Please wait while the Wizard
configures your network.
P. Follow the on-screen
instructions to disconnect the
cables from the Camera.

Q. Enter your router’s username
and password and click Next.
Congratulations! The Camera installation is complete.
To set up your Camera for remote viewing over the Internet, continue
to “Remote Access Setup” below.
Remote Access Setup
Using the TZO DDNS Service, you can access the Camera from anywhere
on the Internet by using the Camera’s domain name. To set up your TZO
account, follow these instructions.
A. To begin the TZO signup
process, click Next. Go to step B.
To skip the TZO signup process,
select No, thanks and click
Next. Go to step H.
B. Click Next.

C. If you are setting up a new TZO
account, select I would like to
create a new TZO DDNS domain
name... and click Next. Go to step D.
If you already have a TZO account,
select No thanks, I have an existing
TZO DDNS domain name... and
click Next. Go to step F.
D. Enter your email address and
your desired domain name,
then click Next.
The Wizard connects your
Camera to the internet.
E. Your TZO account sign up is
complete. An email is sent
to you with your account
information.
Click Next. Go to step H.
F. Enter your current TZO domain
name and click Next.

For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.
Additional support is also available by phone or online.
24-Hour Technical Support
800-326-7114
RMA (Return Merchandise Authorization)
http://www.linksysbycisco.com/warranty
Website
http://www.linksysbycisco.com
Support
http://www.linksysbycisco.com/support
© 2009 Cisco Systems, Inc. All rights reserved.Cisco,the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco Systems, Inc. and/
or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of
their respective owners.The use of the word partner does not imply a partnership relationship between Cisco and any other company.
09081210NC-ST 3420-00571
G. Your TZO account setup is
complete.
Click Next.
H. The Camera setup is complete.
Click Finish.
Congratulations! Your TZO account setup is complete.
Refer to the User Guide for instructions on configuring the Web-based Utility.