Cisco Linksys SGE2010 Instruction Manual

Release Notes for SGE2010/2010P 1
Release Notes
Release Notes for SGE2010/2010P
August, 2009
These Release Notes describe the recommended practices and known issues
that apply to the SGE2010/2010P for the following software versions:
Contents
•“New and Changed Information,” on page 2
•“Limitations and Restrictions,” on page 2
•“Where to Find Support,” on page 3
Firmware
Firmware Version 3.0.0.17
Firmware Image Name ros_cisco_bp_ge_bx-30017.ros
Firmware Release Date June, 2009
Bootcode
Boot Code Version 2.0.0.03
Boot Code Image Name cisco_bp_sge_boot-20003.rfb
Boot Code Release Date June, 2009

Release Notes for SGE2010/2010P 2
Release Notes
New and Changed Information
Firmware versions 3.0.0.17
•Supports new GUI style
•Uses "admin" as the default user name, and "admin" as the default password.
•Uses enterprises(1),cisco(9).otherEnterprises(6).ciscosb(1) as the MIB root
OID for private MIB(s)
Limitations and Restrictions
•Devices that are upgraded or factory loaded with phase 3 firmware version
3.0.0.17 cannot be downgraded to earlier versions of the firmware and boot
code.
•Devices running phase 1 firmware (1.0.x.y) can be upgraded to firmware
version 3.0.0.17 using the Easy Upgrade Utility.
•Devices running phase 2 firmware (2.0.x.y) can be upgraded to firmware
version 3.0.0.17 using regular upgrade procedures. When upgrading, both
firmware images must be upgraded.
•Mixing the stack of devices running phase 3, phase 2, and/or phase 1
firmware are not supported.
•Devices running phase 1 and phase 2 firmware must be upgraded
separately before stacking with phase 3 devices.
•When browsing using Internet Explorer 8, some ports in the ZOOM web
page might flash for a second and not be presented properly. Refreshing
the ZOOM web page or moving to another web page and back will resolve
this issue.
•If a device is configured to advertise its services using Bonjour, its System
Name must contain only upper case characters 'A' to 'Z', lower case
characters 'a' to 'z', numbers 0 to 9, and the character '-'.
•Changing the default HTTP service port number (80) will make the Bonjour
service _csco-sb on the switch inaccessible

Release Notes for SGE2010/2010P 3
Release Notes
Where to Find Support
To obtain current support information for Cisco Small Business products, visit the
following URLs:
www.cisco.com/en/US/products/ps9967/
tsd_products_support_series_home.html
www.cisco.com/go/smallbizsupport
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence,
Cisco WebEx, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing
the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar,
Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP,
CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press,
Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without
Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare,
GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo,
LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers,
Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare,
SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet
Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc.
and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective
owners. The use of the word partner does not imply a partnership relationship between Cisco and
any other company. (0809R)
© 2009 Cisco Systems, Inc. All rights reserved.