Cisco SFE1000P - Small Business Managed Switch Instruction Manual

SFE1000P Firmware Release Note
Software version 1.0.0.20 06/11/2007
Boot version 1.0.0.3 12/31/2006
Known Issues
============
1. VCT
The "Advanced" button disappear after the test for a port
Recommended work around : Reload the page
2. VCT
On FE ports when no cable connected
the result is "Open cable" instead of "No cable"
3. Upgrade
Copy file from client to running-configuration is not supported in this product.
4. BridgingÆmulticastÆigmp snooping
Runtime error displayed when opening help file
5. AdminÆdiagnosticÆport mirroring
Help file mentions that monitor on Rx is the default value yet the default value is
Tx
6. DNS
As error message appears while configuring 9th DNS server as the Maximal
value is 8.