Citizen 6765 User manual

3
CONTENTS
1. INTRODUCTION AND OVERVIEW.................................................................. 5
2. USING THE WATCH ............................................................................................ 6
3. MAIN COMPONENTS AND FUNCTIONS ........................................................ 8
4. SETTING THE TIME .......................................................................................... 14
5. SETTIGN THE CALENDAR .............................................................................. 17
6. SWITCHING MODES ......................................................................................... 22
7. NORMAL DISPLAY ............................................................................................ 23
1. Time signal chime (Repeater)
2. Calendar display
8. ALARM 1 (AL-1) .................................................................................................. 29
9. ALARM 2 (AL-2) .................................................................................................. 32
10. LOCAL TIME (L-TM)......................................................................................... 36
11. LOCAL TIME ALARM (L-AL).......................................................................... 39
English

4 5
1. INTRODUCTION AND OVERVIEW
This analog CITIZEN watch is designed around the normal time, alarm, local time
and calendar functions with a special audible repeater time feature.
• THE REPEATER function lets you determine the current time by simple use of
the watch's buttons.
• THE CALENDAR adjustment is fully automatic Calendar.
ALARM FUNCTIONS
• ALARM 1 (AL-1) lets you set the desired alarm time quickly and easily. The
alarm rings once at the set time and then automatically cancels the alarm setting
after sounding for 10 seconds.
• DAILY ALARM (AL-2) uses a different sound for morning, afternoon and
night.
• LOCAL TIME ALARM (L-AL) rings every day at the set time.
• THE LOCAL TIME (L-TM) settings can be made in 30-minute increments.
12. SECONDS SETTING (0)...................................................................................... 42
13. SOUND MONITOR .............................................................................................. 45
14. INITIAL MONITORING..................................................................................... 47
15. INITIAL SETTING .............................................................................................. 49
16. MOVEMENT CHECK......................................................................................... 52
17. PRECAUTIONS.................................................................................................... 54
18. SPECIFICATIONS............................................................................................... 60
Notice
All repairs performed on this watch are to be performed at the CITIZEN.
When desiring to have your watch repaired or inspected, please contact
the Citizen Service Center either directly or through the store where you
purchased your watch.
Proper maintenance can only be received in the country where your watch
was purchased.

6 7
2. USING THE WATCH Set the Main watch and Sub watch to the current time (See "4. SETTING THE
TIME")
Time signal chime (Repeater) is activated based on the Sub watch. This feature
will not function properly if the Sub watch is not set.
If there is a one minute time difference (plus or minus) between the time signal
chime and the main watch time setting, reset the SUB WATCH to the same time
as the MAIN WATCH.
(Example) If the time signal chime is one minute slow, set the SUB WATCH
forward one minute.
Wearing the watchband
If the watch is worn too tightly, it may be difficult to clearly hear the Watch
sounds.
Allow a space of one finger between the watch and your wrist for best results.
[MAIN WATCH] [SUB WATCH]
Hour hand
Minute
hand
Small
second
hand
Second
hand
Hour
hand
Minute
hand
AM/PM hand

8 9
3. MAIN COMPONENTS AND FUNCTIONS
1
2
NOTE: This watch displays number of years from the leap year.
NOTE: The AM/PM hand should only be used to distinguish morning/evening.
It should not be used as a 24 hour time display.
• The design may differ according to the model.
Crown
3BUTTON (C)
4
56
8BUTTON (B)
9
7
0
K
11
K 12 BUTTON (A)
K 13
K 14
Sub watch second hand
• Date hand
• Alarm ON/OFF hand
• Day hand
• Mode hand
BUTTON (C)
• Mode switch
• Day set
• Sub watch hour hand
• Local time hour hand
• Alarm hour hand
• Year hand
• Sub watch minute hand
• Local time minute hand
• Alarm minute hand
• Month hand
AM/PM hand
Main watch small second hand
BUTTON (B)
• Year/Month Set
• Year/Month display mode
• 1st step position
• Calendar adjust
2nd step position
Time adjust
Normal position
BUTTON (A)
• Time signal chime (Repeater)
• Date set
• Alarm ON/OFF
Main watch hour hand
Main watch minute hand
1
2
3
4
5
6
7
8
9
0
K 11
K 12
K 13
K 14

10 11
Button Functions
CROWN MODE button (A) button (B) button (C) CROWN ROTATION
Normal display
Calendar
display
To normal
display
To normal
display To normal display ------------
------------
------------
------------
* Time signal
chime
(Repeater)
* Calendar
display
Mode Switch
* Watch hand
initial position
monitor
------------
Alarm 1 setting
Alarm 2 setting
Local time
setting
* Sound monitor
(OFF)
Cancelling the
alarm (ON)
ON/OFF Switch
* Sound monitor
------------
Alarm Setting
Alarm Setting
Local time
setting
Mode Switch
* Watch hand
initial position
monitor
Mode Switch
* Watch hand
initial position
monitor
Mode Switch
* Watch hand
initial position
monitor
NORMAL
POSITION
CROWN MODE button (A) button (B) button (C) CROWN ROTATION
Local time
alarm setting
Seconds
setting
(Calendar
setting)
(Time Setting)
ON/OFF Switch
* Sound monitor
Seconds setting
Date setting
Sub watch
seconds setting
Local time
alarm setting
------------
Leap year
month setting
Sub watch
hour, minutes
setting
Mode Switch
* Watch hand
initial position
monitor
Mode Switch
* Watch hand
initial position
monitor
Day setting
------------
------------
------------
------------
Main watch
hour, minute
setting
NORMAL
POSITION
1ST STEP
POSITION
2ND STEP
POSITION
*: Press and hold down

12 13
Hand Function
Crown Mode
MAIN WATCH
hour, minute,
second
SUB WATCH
hour, minute
AM/PM
hand
Date
hand
Mode
hand
Normal
mode
Calendar
display
Alarm 1 set
Alarm 2 set
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Local time hour,
minute
(Main watch)
year, month
Alarm hour,
minute
(Main watch)
hour, minute
Alarm hour,
minute
Local
AM/PM
------------
Alarm
AM/PM
(Main watch)
AM/PM
Alarm
AM/PM
(Main
watch)
Date
(Main
watch)
Date
ON
OFF
ON/OFF
(Main
watch)
Day
(Main
watch)
Day
AL-1
AL-1
AL-2
Normal
position
Crown Mode
MAIN WATCH
hour, minute,
second
SUB WATCH
hour, minute
AM/PM
hand
Date
hand
Mode
hand
Local time
set
Local Alarm
set
Second
setting
Calendar
setting
Time setting
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Main watch hour,
minute, second
Local time hour,
minute
Local time
alarm hour,
minute
(Main watch)
hour, minute
Year, month
(Sub watch)
hour, minute
Local time
AM/PM
Alarm
AM/PM
(Main watch)
AM/PM
------------
(Sub watch)
AM/PM
(at 12
o'clock)
ON/OFF
(Main
watch)
second
(Main
watch)
Date
(Main
watch)
second
L-TM
L-AL
0
(Main
watch)
Day
0
Normal
position
First
step
Second
step

14 15
4. SETTING THE TIME
When setting the current time, it is essential to set both the Main watch and Sub
watch to the same time. If the Sub watch is not matched to the Main watch, the
Repeater will not sound properly.
(1) Pull the crown out to the 2nd step
position when the small second
hand is at 0 position (12 o'clock)
and stops.
* When the crown is pulled out the 2nd
step, the mode hand points to "0." At
the same time, the date hand changes
to the Sub watch second hand and
moves to the 0 (12 o'clock) position
and stops.
(2) Turn the crown to set the Main
watch to the current time.
<MAIN WATCH>
Mode
hand
Minute hand
Small
second
hand
2nd step
position
Hour hand
(3) Press the (B) button to set the Sub
watch to the current time.
* The time setting advances one
minute each time the (B) button is
pressed. Press and hold down the
(B) button to quick-advance the
hour, minute hand.
NOTE:
The Sub watch hour, minute hands
are synchronized with the AM/PM
hand. Watch the AM/PM hand when
adjusting the Sub watch time setting
to ensure the proper setting is made.
(4) When the Sub watch second hand is not aligned with the "0 sec" position, press
(A) button to set it to this position.
Press the (A) button to advance the second hand in 1-second increments.
Press and hold down the (A) button to quick-advance the second hand.
<SUB WATCH>
Second
hand
Hour
hand
Minute hand AM/PM
Button (B)
2nd step
position
Button (A)

16 17
(5) Push the crown in to the normal position at the desired time to start the watch
running at the current time. At this time, the Sub watch second hand returns to
this normal function as the date hand.
The mode hand switches to indicate the day, the hour and minute hands of the
Sub watch switch to local time.
5. SETTIGN THE CALENDAR
(1) Pull the crown out to the 1st step position.
At this time, the local time hour, minute hands switches to the leap year, month
hands.
* The calendar hands advance one increment each time the (A) or (B) buttons is
pressed.
Press and hold down the (A) or (B) button to quick-advance the calendar hands.
Day
1st step position
Button (A)
Date set
Date
Button (B)
Leap year/month set
Button (C)
Day set
Leap year Month

18 19
UUReading the leap year display
The leap year and years following the leap year
are displayed as shown in the diagram. When
the year hand is in the position •
c3 d
•, the
reading is "the third year following the leap
year."
UULeap year display
2004 Leap year
05
06
07
Year 1
Year 2
Year 3
2008
09
10
11
Leap year
Year 1
Year 2
Year 3
2012
13
14
15
Leap year
Year 1
Year 2
Year 3
Leap year
year 1 year 2
year 3
(2) <Date set>
• Press the (A) button to set the date.
(3) <Leap year/month set>
• Check the number of years following the leap year for the current year. (see
below)
• Press the (B) button to set the leap year and month. The year hand is
synchronized with the month hand.

20 21
(4) <Day set>
• Press the (C) button to set the day.
• Pressing the (C) button advances the hand one day at a time.
Quick-advance is not a feature of this function.
UUReading the day display
The points between the days listed on
the day display represent the days not
listed.
Therefore, the line between "Sun" and
"Tue" represents "Monday", etc.
(5) Push the crown all the way in to the normal position when adjustments are
complete.
* The calendar will not function properly operation when the crown is left in the
1st step position.
Adjustment-free calendar
This feature lets you use your watch without need to make end-of-month or leap
year adjustments.
Example:
End-of-month: 11/30 c12/1 Automatic adjustment
Leap year: 2/29 (Leap year) c3/1 Automatic adjustment
2/28 c3/1 Automatic adjustment
* The day setting does not change under this feature.
Monday
Wednesday
Friday

22 23
6. SWITCHING MODES
Normal display
Mode hand: Day
Seconds adjustment mode
Mode hand: 0
Local alarm setting mode
Mode hand: L-AL
Alarm 1 set mode
Mode hand: AL-1
Alarm 2 set mode
Mode hand: AL-2
Local time setting mode
Mode hand: L-TM
* about 2
minutes
Press (C) button Press (C) button
Press (C)
button
Press (C)
button
Press (C) button
*1 There is no input the watch automatically returns to the normal display.
Press (C) button
* about 1
minute
* about 1
minute
* about 1
minute
* about 1
minute
7. NORMAL DISPLAY
The normal time display appears as follows.
Example: Base time 10:09:00/1/TUE
: Local time AM 7:09
Base time (hour)
Local time (hour)
Date
AM/PM
Day
Button (B)
Calendar display mode
(Leap year/Month)
Base time (second)
Base time (minute)
Local time (minute)
Button (A)
Time signal chime (Repeater)

24 25
Press the (A) button to sound the time signal chime (see "1. Time signal chime
(Repeater)").
Press the (B) button to display the calendar (see "2. Calendar display").
1. Time signal chime (Repeater)
The feature allows you to tell the current time by the watch's chime sound.
• Crown in the normal position
* This feature will not work unless
the mode hand is set to day
(normal) display.
(1) Press and hold down the (A)
button for more than 1 second to
activate the chime sound. Time
signal chime (Repeater) operates
under the 12-hour system.
Button (A)
Press and
hold down
for more
than 1
second.
Mode
hand
7
32

26 27
(Example)
You want to make the watch chime sound at 7:32.
1) Hour sound: One high-pitched chime sounds each seconds for each hour
(7 times=7 o'clock).
2) Quarter sound: One high and one low-pitched chime sounds each second
(1/4HR M2=30 minutes).
3) Minute sound: One low-pitched chime sounds each second (2 times=
2 minutes).
By playing the above sound, you know the time is now 7:32.
* Press the any button while the chime is playing to stop the sound.
NOTE:
• The chime sound cannot be activated while the calendar is being displayed.
• The time is not set properly if the time display and chime sound are not
synchronized.
See "4. SETTING THE TIME".
2. Calendar display
The calendar feature displays the date and day of the week.
It is also possible to display the month and leap year calendar indications by using
the watch's (B) button.
Normal display
<Tuesday, 1> <Tuesday, January 1, leap year>
Calendar display
Day Day
Date
Press and hold down
the (B) button for more
than 2 seconds.
Press any button to
manually return to
the normal display.
Date
Local time hour, minute Leap year (hour) Month (minute)
Button
(B)

28 29
• Crown in the normal position
• Press and hold down the (B) button for more than 2 seconds to switch the Local
time hour, minute hands to the Leap year, month hands.
8. ALARM 1 (AL-1)
Alarm 1 ...... Lets you set the desired alarm time quickly and easily. The alarm
rings once at the set time and then cancels the alarm setting.
Setting Alarm 1
• The alarm can be set in one-minute increments.
• AM/PM can be determined with the AM/PM hand.
• Alarm hour, minute hands and AM/PM hand are synchronized.
• Press the (B) button once to advance the alarm hands one minute at a time.
Press and hold down the (B) button to use the quick-advance feature.

30 31
• Crown in the normal position
(Example)
You want to set the alarm for 4:00 PM today.
(1) Press the (C) button to move the mode hand to the AL-1 position.
At this time, the hour and minute hands of local time switch to the hour and
minute hands showing current time.
(2) Press the (B) button and set the alarm to 4:00 PM. Always confirm the AM/PM
hand to ensure the proper setting is made.
* When pressed the (B) button, the alarm ON/OFF hand indicates the ON state.
Mode
Alarm ON/OFF
Button (C)
To AL-1 mode
Alarm set (4:00 PM)
Button (A)
Cancelling the alarm
Button (B)
Alarm time set
AM/PM
NOTE:
When the alarm is set between 12:00-12:30 AM, the alarm hand sweeps forward
and back in a 30 minute arc and stops at the set time.
This is normal and does not indicate faulty movement.
(3) Press the (C) button 5 times when the setting has been completed the mode
hand return to the day display. (normal display)
[About the alarm 1]
Alarm 1 rings for 10 seconds upon reaching the alarm set time. Press any button to
stop the alarm once it has started chiming.
UUCancelling the alarm setting
• Press the (A) button in the Alarm 1 mode to switch the alarm OFF.
* At this time, the alarm set time returns to the current time display.
* If there is no input for about 1 minute, the watch automatically returns from
alarm 1 (AL-1) mode to the normal display.

32 33
9. ALARM 2 (AL-2)
Alarm 2 (Daily alarm) ...... This feature allows the alarm to ring every day at
the set time.
Setting the Daily alarm (Alarm 2)
• The alarm can be set in one-minute increments.
• AM/PM can be determined with the AM/PM hand.
• Alarm hour, minute hands and AM/PM hand are synchronized.
• Press the (B) button once to advance the hands one minute at a time. Press and
hold down the (B) button to use the quick-advance feature.
• Crown in the normal position
(Example)
You want to set the alarm for 6:00 AM every day
(1) Press the (C) button to move the mode hand to the AL-2 position. At this time,
the Local time hands switch to the alarm hour, minute set hands and the date
hand switches to the Alarm ON/OFF function.
(2) Press the (B) button and set the alarm to 6:00 AM. Always confirm the
AM/PM hand to ensure the proper setting is made.
• Pressing the (B) button automatically moves the alarm ON/OFF hand to the ON
position.
Mode
Alarm ON/OFF
Button (C)
To AL-2 mode
Alarm set (6:00 AM)
Button (A)
Alarm ON/OFF switch
Button (B)
Alarm time set
AM/PM

34 35
NOTE:
When the alarm is set between 12:00-12:30 AM, the alarm hands sweeps forward
and back in a 30 minute arc and stops at the set time. This is normal and does not
indicate faulty movement.
(3) Press the (C) button 4 times when the setting is complete to move the mode
hand back to the normal time display.
[About the Daily alarm (AL-2)]
Depending on the time of day for which the alarm is set, for the watch will sound
3 different alarms.
• Refreshing sound ... From 4:00 AM to 11:59 AM (14-second chime)
• Vibrant sound ... From 12:00 Noon to 5:59 PM (15-second chime)
• Relaxing sound ... From 6:00 PM to 3:59 AM (16-second chime)
Press any button to stop the alarm from chiming.
UUCancelling the alarm setting
Press the (A) button in the AL-2 mode to switch the alarm OFF.
* If there is no input for about 1 minute, the watch automatically returns to the
normal display.

36 37
10. LOCAL TIME (L-TM)
Setting Local Time
• Settings can be made in 30-minute increments.
• Local time hour, minute hands and AM/PM hand are synchronized.
• Press the (B) button once to advance in 30-minute increments. Press and hold
down the (B) button to use quick-advance feature.
Button (C)
To L-TM mode
Local time (9:30 AM)
AM/PM
Button (B)
Local time set
Mode
• Crown in the normal position
(Example)
You want to synchronize the current time in Tokyo (5:30 PM)
with the local (current) time in Paris (9:30 AM).
(1) Press the (C) button to move the mode hand to the L-TM position. At the same
time, the date hand moves to the 31st (12:00 PM) position.
(2) Press the (B) button to set the local time to 9:30 AM. Always confirm the
AM/PM hand to ensure the proper setting is made.
NOTE:
When the local time is set between 12:00-12:30 AM the local time hands sweep
forward and back in a 30 minute arc and stop at the set time. This is normal and
does not indicate faulty movement.

38 39
(3) Press the (C) button 3 times when the setting is complete to move the mode
hand back to the Day (normal) mode position.
* If there is no input for about 1 minute, the watch automatically returns to the
normal display.
11. LOCAL TIME ALARM (L-AL)
Local time alarm (L-AL) ...... This feature allows the alarm to ring every day
at the set time.
Setting the Local time alarm
• The alarm can be set in one-minute increments.
• AM/PM can be determined with the AM/PM hand.
• Alarm hour, minute hands and AM/PM hand are synchronized.
• Press the (B) button once to advance the hands in one-minute increments.
Press and hold down the (B) button to use the quick-advance feature.

40 41
• Crown in the normal position
(Example)
You want to set the alarm to sound at 10:00 AM Paris time.
(1) Press the (C) button to move the mode hand to the L-AL position. At the same
time, the Local time hands switch to the alarm hour, minute set hands and the
date hand switches to the Alarm ON/OFF hand.
(2) Press the (B) button to set the alarm to 10:00 AM. Always confirm the AM/PM
hand to ensure the proper setting is made.
• Pressing the (B) button automatically moves the ON/OFF hand to the ON
position.
Mode
Button (C)
To L-AL Mode
Alarm set hands (10:00 AM)
Button (A)
Alarm ON/OFF switch
Button (B)
Alarm time set
AM/PM
NOTE:
When the alarm is set between 12:00-12:30 AM, the alarm hand sweep forward
and back in a 30 minute arc and stop at the set time. This is normal and does not
indicate faulty movement.
(3) Press the (C) button 2 times when the setting is complete to move the mode
hand back to the Day (normal) mode position.
[About the Local time alarm]
The local time alarm will sound at the set time for 16 seconds.
* Press any button to stop the alarm from chiming.
UUCancelling the alarm setting
Press the (A) button in the L-AL mode to switch the alarm OFF.
* If there is no input for about 1 minute, the watch automatically returns to the
normal display.