Citizen C300 User manual

C300 Abbreviated instruction
• To see details of specifications and operations, refer to the instruction manual: C300 instruction manual
English
Component identification
PM
MHP
1:10
1:20
1:30
1:40
1:50
2:00
2:30
3:30
4:00
4:30
5:00
6:00
7:00
8:00
9:00
3:00
24 2
4
6
8
10
12
14
16
18
22
UTC
24
4
8
12
16
20
PM AM
H.R.
MODE
TME
CAL
AL-1
SET
AL-2
AL-3
CHR
TMR
DOWN
UP
20
UTC hour hand
Hour hand
24-hour hand
UTC minute hand
Button
A
Button
M
Minute hand
Digital display
Mode hand
Button
B
Button
C
• Actual appearance may differ from the illustration.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)
Setting the time
• The time indicated with the hour, 24- hour and minute hands and UTC hour/
minute hands is synchronized with that on the digital display.
• Press and hold button
B
for 2 seconds or more to move the hour and minute
hands to 12 o'clock position temporarily to see the digital display without their
interruption. Press the button again to return them to normal movement.
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [TME].
2.
Press and release the upper right button Aor lower left
button Crepeatedly to indicate an area name you want on
the digital display.
3.
Pull out the lower right button M.
The time indication on the digital display starts blinking and the time
becomes adjustable.
4.
Press and release the upper right button Arepeatedly to
change the target to be set.
• Each time you press the button, the target changes as follows:
Summer time Second Minute Hour 12/24-hour
basis
PM PM PM PM
5.
Press and release the lower left button Cto adjust the target.
• Press button
C
in accordance with a reliable time source to adjust the
second.
• Pressing and holding the button changes indication continuously.
• “AM” or “PM” is displayed to indicate AM or PM in 12-hour basis
indication.
• “SUMMER” is displayed when summer time is activate.
• Summer time cannot be activated when “UTC” is chosen for the area.
6.
Repeat steps 4 and 5 to set other targets.
7.
Push in the lower right button Mto finish the procedure.
Setting the calendar
The calendar of this watch does not have to be adjusted manually until Thursday,
December 31, 2099 including leap years. (perpetual calendar)
• Press and hold button
B
for 2 seconds or more to move the hour and minute
hands to 12 o'clock position temporarily to see the digital display without their
interruption. Press the button again to return them to normal movement.
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [CAL].
The calendar is indicated on the digital display.
2.
Press and release the upper right button Aor lower left
button Crepeatedly to indicate an area name you want on
the digital display.
3.
Pull out the lower right button M.
The calendar indication on the digital display starts blinking and the
calendar becomes adjustable.
4.
Press and release the upper right button Arepeatedly to
change the target to be set.
• Each time you press the button, the target changes as follows:
Month YearDate
5.
Press and release the lower left button Cto adjust the target.
• Pressing and holding the button changes indication continuously.
6.
Repeat steps 4 and 5 to set other targets.
7.
Push in the lower right button Mto finish the procedure.
• The day of week is set automatically.
Switching the time of analog and digital sections
The time of the analog section cannot be adjusted directly.
Set the time of the area you want to indicate in the analog section once in the
digital section and then switch the time between the analog and digital sections.
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [TME] or [CAL].
2.
Press and release the upper right button Aand lower left
button Cat the same time.
The time of the digital and analog (hour/minute/24-hour hands) sections
switches.

C300 Abbreviated instruction
Using the world time
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [TME] or [CAL].
The calendar is indicated on the digital display when you choose [CAL].
2.
Press and release the upper right button Aor lower left
button Crepeatedly to indicate an area name you want on
the digital display.
The time or calendar of the area you choose is indicated on the digital
display.
Table of time zones and representative areas
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Time
zone Area name Representative area
0UTC
Coordinated Universal
Time
LON
London
+1 PAR
Paris
ROM
Rome
+2 CAI
Cairo
IST
Istanbul
+3 MOW
Moscow
KWI
Kuwait
+4 DXB
Dubai
+5 KHI
Karachi
+5.5 DEL
New Delhi
+6 DAC
Dhaka
+7 BKK
Bangkok
+8
SIN
Singapore
HKG
Hong Kong
BJS
Beijing
Time
zone Area name Representative area
+9 TYO
Tokyo
+10 SYD
Sydney
+11 NOU
Noumea
+12 AKL
Auckland
–10 HNL
Honolulu
–9 ANC
Anchorage
–8 LAX
Los Angeles
–7 DEN
Denver
–6 CHI
Chicago
MEX
Mexico City
–5 NYC
New York
YUL
Montreal
–4 CCS
Caracas
–3 RIO
Rio de Janeiro
BUE
Buenos Aires
Using the zone-set function
You can hide unnecessary ones in the 30 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [SET].
2.
Pull out the lower right button M.
The digital display starts blinking.
3.
Press and release the upper right button Arepeatedly to
indicate an area name you want on the digital display.
4.
Press and release the upper left button Bto select “SET”
(display) or“OFF”(hide) of the area.
• Each time you press the button, “SET” and “OFF” changes alternately.
• Each time you press button
C
in this step, the summer time setting
changes alternately.
5.
Repeat steps 3 and 4 to set other areas.
6.
Push in the lower right button Mto finish the procedure.
Correcting the reference position
1.
Press and release the lower right button Mrepeatedly to
move the mode hand to point to [CHR].
2.
Pull out the lower right button M.
The reference position becomes adjustable.
Correct reference positions:
All hands (except the mode hand:
12 o'clock position (straight above)
3.
Press and release the upper left button
Brepeatedly to change the target to
be adjust.
• Each time you press the button, the target changes and digital indication
changes as follows:
UTC hour/minute hands (UTC) → hour and 24-hour hands (H.R.) → minute
hand (MIN) → (back to the top)
4.
Press and release the upper right button Aor lower left
button Cto adjust the target.
• Pressing and holding the button move the hands continuously.
5.
Repeat steps 3 and 4 to adjust other targets.
6.
Push in the lower right button Mto finish the procedure.
Resetting the watch - All Reset
1.
Pull out the lower right button M.
2.
Press buttons A, Band Cat the same time.
All the digital indication lights up and the watch is reset.
After All Reset
The watch changes into reference position adjustment status by pressing button
B
. After pressing button
B
, adjust the reference positions referring to steps 3 -
6 of Correcting the reference position. After the adjustment, set the time and
calendar.
MHP
24 2
4
6
8
10
12
14
16
18
22
UTC
24
4
8
16
20
PM AM
20