Citizen 9100 User manual

WWTil.YffiilYffiE
Cal. gl?k?k
9100. 9L10, 9120, 9130, 9132
AT]TOMATIC & MA]TT}AL WINDII\G MOVEMENT WITH MTJLTIFUNCTIOI\
Basic specification 13-1 12"',
S30.2mm
S2S,6mm
5.52mm
28800 vibration$ Per hour
2S Jewels
Function
Automatic & manual winding
Display by means of hands: hour, minute, second.
Date calendar
Day / Month I Zfi{ours display by means of hands
Power reserve disPlaY
Stop second device
shock-absorber device for balance staff
Tech n ical characteristics
Balanceable weight of hands
Second hand
Minute hand
Hour hand
Small hand
Power reserve hand
Hands fitting force
Second hand
Minute hand
Hour hand
Small hand
Power reserve hand
Lift angle
Casing
Max. 0.60pN r ffi
Max. 1.251rN rffi
Max. 1 .50pN'm
Max. 0.04PN'm
Max. 0.25PN'm
Max. 30N
Max. 50N i
Max. 50N
Max. 30N
Max. 30N
51"
Non-corresponding to "Divers' watches" defined by l506425
Time performance
uartz watch and the accuracy will change
maximum of several ten seconds during rewinding the spring, then the accuracy of the half winding condition will
be different from that of full winding condition.
<Time performance measurement condition>
AccuracY
Measure within lapse of 10-60 minutes from full winding with C posture'
Posture difference
Measure accuracy in 4 different postures shown on the
right picture within lapse of 10 - 60 minutes from full winding.
Noirection of 4 postures ODate Dial side up @6 o'clock side up
Running time
MeasurJ the running time from full winding'
XThe mainspring becomes fully winded by rotating the ratchet wheel 7'5 times (turning the crown 40 times)'
@9 o'clock side uP @3 o'clock side uP
-10*30 $econds/day
Under 40 seconds/ day
More than 40 hours
c @ @@
5'o ?-

Automatic winding structure
Winding direction : Clockwise (seeing from case back side)
Operating method
\Mnding the mainspring, adjusting the hand, month/day/date is done by the below procedure.
({) Winding the mainspring
Automatic winding watch can be also manual-winded by turning the crown in 'A" position.
Wnd 15 - 20 times clockwise until second hand starts to move naturally. .
(2)Adjusting Day
Adjust the day by rotating the crown counter-clockwise in ,'8" position.
(3)Adjusting date
Adjust the date by rotating the crown clockwise in "B. position.
(4)Adjusting time
Rotate the crown in "C" position and adjust the standard time.
Then check if it is morning or afternoon and adjust correcily.
(S)Adjusting month
Push the button "D" and adjust the month.
Xlf the button is not pushed to the end, the month is not changed perfec{y.
Power reserve display
Day display
24 Hour dis Mainspring winding
Date display
Separated parts
Month adjusting
Month display
Day & Date adusting
S0S-S03 x t
065-A05 x I

Variation
91 00 91 10 9120 91 30 9132
ooooo
ot___. 9ooo
ooooo
ooooo
ooomm
omomm
OH
i*i+l;'{+tii:Slf/.iiitl}$.i*Si+*+}i$u,**roor.o***o,,**#, oomo
o
ffi- omoo
These specifications might be changed without prior notice.
C'TilEHNT TfiH C#," WW-