Citizen W140 User manual

Hands and buttons
Crown
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Hour
hand
Second
hand
Minute hand
Button
Date
indication
•Actualappearancemaydifferfromtheillustration.
•Thecrownhastwopositionswhenpullingitout.
W410 Abbreviated instruction
•Thiswatchissolar-powered.Exposethedialtolightanduseitsufficientlycharged.
•Toseedetailsofchargingtime,specificationsandoperations,refertotheinstructionmanual: W410instructionmanual
•Tochecktheoperationmovie,clicktheicon
Video
onthePDF.
English
Before connecting with a smartphone
Thiswatchcommunicateswithsmartphones
through
Bluetooth Low Energy power-saving
communicationtechnology.
Youmustinstallthededicatedapp“
CITIZEN
Eco-Drive Bluetooth S
”onyoursmartphoneand
startittomakepairing(registration)between
thephoneandthewatchtoconnectthem.
Theflowofconnectionisasfollows.
• The Bluetooth® wordmarkandlogosareregistered
trademarksownedby Bluetooth SIG, Inc.
• AndroidisaregisteredtrademarkofGoogleInc.
• iOSisanameofanoperatingsystemofAppleInc.IOSis a
trademarkorregisteredtrademarkofCiscointheU.S.and
othercountriesandisusedunderlicense.
Compatible smartphones
Youcanseeinformationaboutcompatiblesmartphones(compatiblewith
Android OS 7.0/iOS 11.4 ornewer)andthededicatedappatthelinkbelow.
http://www.citizenwatch-global.com/support/
About time reception
Thiswatchreceivestimeinformationfromyoursmartphoneateveryconnection
andadjuststhetimeandcalendarautomatically.
Inaddition,thewatchmakestemporaryconnectionwiththesmartphone
automaticallyonceadaytoadjusttimeandcalendarevenafterdisconnection
whenitisexposedwithlightafter3:00AMonit(automatictimereception).
•Pairingwithasmartphoneisrequiredfortheautomatictimereception.
•Whenthewatchissavingpower,theautomatictimereceptionwillstartafter
thepowersaveiscanceled.
•Automatictimeinformationreceptionfunctiondoesnotworkinthefollowing
cases:
-Whenthecrownisnotatposition
0
.
-Powerreservelevelofthewatchis“0”(duringinsufficientchargewarning).
Crown's position
0 1 2
Component identification
Indication
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Alarm setting indication
( ON/OFF )
Connection status
indication (
ON/OFF )
Flight mode setting
indication ( ON/
OFF )
Indication of ongoing
communication
processing ( ACT )
Notification indication
( CALL/INFO )
Smartphone search
indication ( FIND )
Install the dedicated app
Pairing (registration)
Connection
Start up the app
Disconnection

W410 Abbreviated instruction
Pairing (registering) the smartphone
Executepairingatfirstwhenconnectingthewatchandyoursmartphone.
•Use[Pairing]onthe[
Setting ]screenwhenexecutingpairingforthesecond
timeandafter.
Before pairing
•Uniquepairinginformationissavedonthewatchandsmartphoneaspairingis
executed.
•Whenyouexecutepairinganewonawatchwhichhaspairinginformation,the
existinginformationisremovedandnewoneissaved.
Executing pairing
•Forpairing,youhavetooperateboththewatchandthesmartphone.
Operation on the smartphone
1. Download the dedicated app “ CITIZEN Eco-Drive Bluetooth
S
” at an app site and install it.
2. Start the dedicated app.
•Keeptheappscreendisplayeduntilpairingisfinished.
•Agreewhenadialogappearstorequestyourpermissiontouse
Bluetooth 
connection.Forotherrequestsforpermission,followinstructionsonyour
smartphone.
3. Tap [Connect with your watch] and tap [OK].
Thepairingscreenisdisplayed.
Operation of the watch
4. Confirm that the position of the crown is 0and the second
hand is moving every second.
•Pressandholdthebuttonfor1secondwhenthesecondhandisnot
moving.
5. Press and hold the button for 4 seconds or more.
•Thesecondhandpoints“ ACT ”(0-secondposition),swingsleftandright
andpoints“
ACT ”again.Releasethebuttonafterthesecondpointingto
“
ACT ”ofthehand.
Pairingstarts.
Smartphone
“Connected”appearsaspairingisfinished.
•Itmaytakeabout20-30secondstofinishpairing.
When pairing finished successfully
Thesecondhandofthewatchpoints“ 
ON ”(10-secondposition)ofthe
connectionstatusindicationtemporarilyandreturnstonormalmovement.
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
12
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Youmusttrypairingagainwhenthesecondhandpoints“  OFF ”(5-second
position)oftheconnectionstatusindication.
•Pressandholdthebuttonofthewatchfor1secondtocancelthe“ 
OFF ”
indicationbeforeyoutrypairingagain.
Connecting/disconnecting the smartphone
Checking connection status
1. Push the crown in to position 0.
2. Press and release the button.
Thesecondhandindicatesthecurrentconnectionstatus(  ON/OFF ).
ON
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
12
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Connected
OFF
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
12
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Disconnected
•Thesecondhandreturnsnormalindicationautomaticallyin10seconds.
Pressthebuttontoreturnthesecondhandtonormalindication
immediately.
•Thewatchkeepscorrecttimeandcalendarevenwhilethesecondhand
indicatesconnectionstatus.
Connection status indication
Thesecondhandautomaticallyindicatesconnectionstatus( 
ON/OFF )asthe
connectionstatusbetweenthewatchandthesmartphonechanges.
Disconnecting
Cancelindicationofthesecondhandbeforeoperationwhenitpoints“ CALL ”
(55-secondposition)or“
INFO ”(50-secondposition)ofthenotification
indication.
1. Push the crown in to position 0while the watch is connected.
2. Press and hold the button for 2 seconds.
•Releasethebuttonwhenthesecondhandpoints“ ACT ”(0-second
position)afterpointing“ 
ON ”(10-secondposition).
Theconnectionisclosedandthesecondhandpoints“ 
OFF ”(5-second
position)oftheconnectionstatusindication.
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
12
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Connecting
Followthestepsbelowtoconnectthewatchtoadisconnectedsmartphoneagain.
•Thewatchcannotbeconnectedwithasmartphonewithoutpairing.
1. Push the crown in to position 0while the watch is
disconnected.
2. Press and hold the button for 2 seconds.
•Releasethebuttonwhenthesecondhandpoints“ ACT ”(0-second
position)afterpointing“ 
OFF ”(5-secondposition).
Thewatchisconnectedwiththesmartphoneandthesecondhandpoints“ 
ON ”(10-secondposition)oftheconnectionstatusindication.
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
12
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Video
Video
Video
Video

Notification indication on the watch
Thesecondhandpointsthenotificationindicationcorrespondingtothetypeof
receivednotification.
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Notification indication by the second hand
Indication Second hand
position Notification type
CALL
55seconds Incomingcall
notification
INFO
50seconds Variousinfo
notification
OFF
5seconds
Disconnection
notification(
LINK
LOSS )
(doubledas
connectionstatus
indication)
ACT
0seconds
Receiving
timeinfoor
connecting
(Activation)
•Notificationwiththesecondhandisindicatedonlywhenthecrownisin
position
0
.Whenthewatchreceivesnotificationwhenitcannotbeindicated,
notificationindicationispostponeduntilitcanbeindicated.
•Whenthewatchreceivesanewnotificationwhileitindicatesanotification,the
oldoneiscanceledandthenewoneisindicated.
•Thewatchkeepscorrecttimeandcalendarevenwhilethesecondhand
indicatesanotification.
Notification sound
Youcancontroltone,volumeandemittingtimesofnotificationsoundonthe
[
Notification ](notification)screenofthededicatedapp.
•Notificationsoundisemittedevenwhenthesecondhandcannotindicate
notification.
•Notificationsoundisemittedagainwhenapostponednotificationisindicated
bythesecondhand.
•Notificationsoundcanpreviouslybecheckedwhensettingit.Fordetails,see
theinstructionmanual.
Notification reception area
Connectabledistancebetweenthewatchandthesmartphoneisuptoabout10m
(33feet).Connectablerangemaybeshorterduetoobstaclessuchaswalls.
Donotblockthewatchwithyourbodysuchasyourarm.
Canceling the notification indication
Thesecondhanddoesnotreturntonormalmovementwithoutoperationfor
cancelingnotificationwhenitindicatesfollowingnotifications:“
CALL ”,“ INFO ”
and“ 
OFF ”(disconnectionnotification, LINK LOSS ).
Previouscancelingofnotificationindicationmayberequiredforsomeoperation.
•Cancelednotificationcannotbeshownagain.
1. Press and hold the button for 1 second while notification is
indicated.
Thenotificationindicationiscanceledandthesecondhandreturnsto
normalmovement.
•Changingthepositionofthecrownalsocancelsthenotification
indication.
W410 Abbreviated instruction
Turning the watch into the flight mode
Youcandeactivatethefunctiontoconnectwithasmartphonewhenrequired
suchasinaplaneorahospital.
1. Pull the crown out to position 1.
Thesecondhandindicatesthealarmsetting(  ON/OFF ).
2. Rotate the crown to make the second hand point the flight
mode setting (
ON/OFF ).
1
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
ACT (0-second position)
Alarm setting
( ON/OFF )
Flight mode setting
(
ON/OFF )
•Eachtimeyourotatethecrown,thesecondhandmovesasfollows:
Alarmsetting(  ON/OFF )→ ACT → flight mode setting (  ON/OFF )→
(backtothetop).
3. Press the button to switch on/off of the flight mode setting.
•Eachtimeyoupressthebutton,on/offofthesettingchangesalternately.
ON
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Theflightmode
settingisturnedon
andtheconnection
functionbecomes
unavailable.
OFF
12
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
6
97
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
Theflight
modesettingis
turnedoffand
theconnection
functionbecomes
available.
4. Push the crown in to position 0to finish the procedure.
Thewatchreturnstonormalindication.
After turning on the flight mode setting
Connectiontothesmartphoneisclosedandthewatchcannotconnectwithit.
•Thesecondhandpoints“ 
ON ”(25-secondposition)andreturnstonormal
movementwhenyoutrytoconnectthem.
•Automatictimereceptionalsobecomesunavailable.
After turning off the flight mode setting
Theconnectionfunctionofthewatchbecomesavailableastheflightmode
settingisturnedoff.
Executeconnectionoperationwhenyouwanttoconnectitwiththesmartphone.
•Checkthetimeandcalendarofthewatchandadjustthemifrequired.
Video

Checking the reference position
1. Pull the crown out to position 1.
Thesecondhandindicatesthealarmsetting(  ON/OFF ).
2. Rotate the crown to make the second hand point the flight
mode setting (
ON/OFF ).
•Eachtimeyourotatethecrown,thesecondhandmovesasfollows:
Alarm setting (  ON/OFF )→ ACT →
flight mode setting (  ON/OFF )→(backtothetop).
3. Press and hold the button for 5 seconds.
Thehandsandindicationstarttomovetothecurrentreferencepositions
storedinmemory.
•Releasethebuttonasthesecondhandstarttomove.
4. Checking the reference
position
Correctreferencepositions:
•
Hour, minute and second hands:
0 hour 00 minute 0 second
• Date indication: midway
between “31” and “1”
Whenthecurrentreference
positionisdifferentfromthe
correctone,proceedtostep4of
“Correctingthereferenceposition”.
5. Push the crown in to position 0to finish the procedure.
Adjusting the time and calendar manually
1. Pull the crown out to position 1.
Thesecondhandindicatesthealarmsetting(  ON/OFF ).
2. Rotate the crown to make the second hand point “ ACT ”
(0-second position).
•Eachtimeyourotatethecrown,thesecondhandmovesasfollows:
Alarm setting (  ON/OFF )→ ACT →
flight mode setting (  ON/OFF )→(backtothetop).
3. Press and hold the button for 2 seconds or more.
•Releasethebuttonafterthesecondhandswingsleftandrightandpoints
“
ACT ”(0-secondposition).
4. Press the button to change the target to correct.
•Eachtimeyoupressbutton,thetargetchangesasfollows.
Minute → hour/date → year/month →(backtothetop)
•Thehandsandindicationsslightlymovewhenselectedtoshowthey
becomeadjustable.
5. Rotate the crown to adjust the hand/indication.
•Minute/secondhandsandhourhand/dateindicationsynchronouslymove
respectively.
•ChangeofdateindicationshowsitjustbecameAM.Takecarethetimeset
isAMorPM.
•Whenyourotatethecrownquicklyafewtimes,thehandsanddate
indicationwillmovecontinuously.Tostoptherapidmovement,rotatethe
crownineitherdirection.
12
1
2
3
4
5
6
7
8
9
10
11
“Month”correspondstooneof
the12zonesshowninthefigure
below.
Eachnumbermeansmonth.
Theyearcorrespondstothe
yearssinceleapyearandis
indicatedwiththepositionofthe
secondhand.
Yearssinceleapyear: 0 (Leap
year)
0
Yearssinceleapyear: 1
1
Yearssinceleapyear: 2
2
3
Yearssinceleapyear: 3
6. Repeat steps 4 and 5.
7. Push the crown in to position 0in accordance with a reliable
time source.
W410 Abbreviated instruction
12
6
9
31
1
31
1
I
N
F
O
A
C
T
C
A
L
L
O
F
F
O
N
N
O
F
F
O
D
N
I
F
N
O
F
F
O
31
1
31
1

Correcting the reference position
1. Pull the crown out to position 1.
Thesecondhandindicatesthealarmsetting(  ON/OFF ).
2. Rotate the crown to make the second hand point the flight
mode setting (
ON/OFF ).
•Eachtimeyourotatethecrown,thesecondhandmovesasfollows:
Alarm setting (  ON/OFF )→ ACT →
flight mode setting (  ON/OFF )→(backtothetop).
3. Press and hold the button for 5 seconds.
Thehandsandindicationstarttomovetothecurrentreferencepositions
storedinmemory.
•Releasethebuttonasthesecondhandstarttomove.
4. Pull the crown out to position 2.
5. Press and release the button repeatedly to change the hand/
indication to be corrected.
•Eachtimeyoupressthebutton,thetargetchangesasfollows:
Hour hand/date indication → minute/second hands →(backtothetop)
•Thehandsslightlymovewhenselectedtoshowtheybecomeadjustable.
6. Rotate the crown to adjust the hand/indication.
•Minute/secondhandsandhourhand/dateindicationsynchronouslymove
respectively.
•Whenyourotatethecrownquicklyafewtimes,thehand/indicationwill
movecontinuously.Tostoptherapidmovement,rotatethecrownineither
direction.
7. Repeat steps 5 and 6.
8. Push the crown in to position 0.
Thewatchkeepstoindicatethereferenceposition.
9. Press the button to finish the procedure.
•Thehandsandindicationreturnsnormalin2minuteswithoutpressing
thebutton.
Resetting the watch — All Reset
1. Pull the crown out to position 2.
Thealarmsoundsandthesecondhandpoints30-second.
2. Press and hold the button for 7 seconds or more.
Asyoureleasethebutton,thealarmsoundsandallresetisexecuted.
The setting values after All Reset
Time 0:00:00AM
Calendar January1ofleapyear,Sunday
Alarm setting
OFF
Alarm time 0:00AM
Pairing information Pairinginformationisnotremoved.
Connection status 
OFF
Record of power
generation amount Removed
After All Reset
AfterAllReset,adjustthereferenceposition,setthetimeandcalendarand
executealarmsetting.
W410 Abbreviated instruction