Clair de Lune Rocking Stand User manual

Rocking Stand
In the unlikely event that you should find any component missing from your stand please call our helpline
and replacements will be forwarded by return.
Helpline number: 0161 491 9800, open Monday to Friday 8:30 a.m. to 5:30 p.m.
Never assemble or use a stand with missing or broken parts.
Ensure that your stand is always secure and tighten all screws fully, but do not overtighten as this can
make it insecure.
Please assemble with a hand held screwdriver and not a cordless drill as this can lead to over tightening
of the screws.
Before first use of the rocking stand please check to ensure that all screws are tightened securely.
It is important that the stand is checked regularly during continued use to ensure that all the screws
remain secure.
IMPO RTANT: Please read before assembling
!

Safety
IMPO RTAN T - PLEASE READ IN STR C T IO N S C AREFULLY BEFO RE USE AN D RETAIN FO R FUT URE R EFEREN C E.
IN O R DER T H AT T H E STAN D YO U H AVE PUR C HA SED MAY BE SAFELY U SED T H E FO LLO W IN G IN ST RUC T IO N S
MUST BE FO LLO W ED.
W ARN IN G : K EEP T HE PLAST IC BAG AW AY FRO M C H ILD REN TO AVO ID SUFFO C AT IO N .
Tools
Required
A x 2 B x 2
C x 2
D x 4
E x 2
Components
50mm
x 8
40mm
x 8
12mm
x 4
Phillips head
Size 2 (PH2)
screwdriver
To prevent damaging
the screws during
assembly, please ensure
you use the right size
and type of screwdriver.
Pozidriv®
Phillips
U
WARNING: This product is only suitable for a child who cannot sit up unaided
WARNING: Only use on a rm, horizontal level and dry surface
WARNING: Do not let other children play unattended near the carry cot
WARNING: Do not use if any part of the carry cot is broken, torn or missing
WARNING: Do not attach anything to the stand, which may aect its stability
Use only replacement or approved parts from Dawson Rodgers & Co Ltd.
Do not place the carry cot near an open re or other source of strong heat
The handles and the bottom of the carry cot should be inspected regularly
for signs of damage and wear
The head of the child in the carry cot should never be lower than the body of the
child
If the mattress is purchased seperately, it shall t well into the product and the depth
from the top of the side of the product should be less than 170mm (200mm if to be
used with a stand) when the mattress is in position of use
The stand is designed for use with a palm or wicker moses basket of min/max
700-835mm in length and 300-370mm in width.
Do not add another mattress on top of the mattress provided or recommended
by Dawson Rodgers & Co Ltd
When not in use, the stand should be stored away from children.
CLEANING INSTRUCTIONS
Stand - If necessary, wipe with damp cloth
Dispose of all packaging safely before use. Complies with BS EN 1466: 2014
Dawson Rodgers & Co Ltd, Shentoneld Road, Sharston Industrial Estate
Wythenshawe, Manchester, M22 4RW - 0161 491 9800 / [e-mail]

1
2
50mm x 2
50mm x 2
50mm x 2
IIMMPPOORRTTAANNTT:: PPlleeaassee mmaakkee ssuurree wwhheenn aasssseemmbblliinngg tthhee ssttaanndd tthhaatt tthhee pprree--ddrriilllleedd gguuiiddee hhoolleess iinn eeaacchh ccoommppoonneenntt aarree
l
li in ne ed d u up p a an nd d t th ha at t t th he e s sc cr re ew ws s a ar re e l lo oc ca at te ed d c ca ar re ef fu ul ll ly y i in nt to o t th he e h ho ol le es s b be ef fo or re e t ti ig gh ht te en ni in ng g t th he em m u up p. .
Ensure that the decorative side of base C faces outwards, the opposite way to the dowel
recesses in uprights, which should be facing inwards.
1. Using 4 x 50mm screws, fasten A and B uprights to decorative base rocker C through the holes in the base.
2. Repeat with the second set of parts A, B and C.
50mm x 2
B
B
A
A
C
C
!
Feet pointing
outwards
40mm
40mm
40mm
40mm
40mm
40mm
40mm
40mm
D
D
D
D
!
Important: Make sure dowels are pushed fully into dowel recesses.
1. Align the two sides of rocking stand so that the recesses for dowels D in the uprights face each other.
2. Locate the 4 cross dowels D into the recesses in uprights A/B, secure using 8 x 40mm screws.
B
B
A
A

3
E
12mm x 1
12mm x 1
12mm x 1
12mm x 1
E
EEnnssuurree tthhee mmoosseess bbaasskkeett iiss hheelldd sseeccuurreellyy bbyy tthhee eenndd ssttrraappss.. UUssee tthhee 33 hhoolleess oonn tthhee eenndd ssttrraappss ttoo pprroovviiddee
aaddjjuussttmmeenntt.. CChheecckk ccaarreeffuullllyy tthhaatt tthhee mmoosseess bbaasskkeett iiss sseeccuurree iinn tthhee rroocckkiinngg ssttaanndd bbeeffoorree uussee..
Align the holes in the flexible straps E with the gold star-shaped fittings on the inside of the uprights A/B on
both sides. ecure using 4 x 12mm screws. Ensure that the adjustment ends of the straps are oposite.
Important:
!