Claridge Calyx Contio User manual

Contio
Mobile Board
ASSEMBLY INSTRUCTIONS
WARNING
Risk of injury to installers and users
Read the entire assembly directions before
beginning assembly.
PACKAGE CONTENTS
1 - Contio Framed Board
2 - Base with Casters (x2)
3 - #8 x 1” Screws (x4)
4 - 5/16-18 x 1 ¼” BH Screws (x2)

Contio Mobile Board
ASSEMBLY of Bases to framed board
1. Lay the Contio panel flat on a
table or the floor.
2. Position bases as shown below.
3. Screw base onto frame using
the provided hardware.
800-434-4610
Calyxbyclaridge.com
ASSEMBLY of Casters to base
1. Lay base feet out with the stems up and hole
positioned as shown.
2. Snap Casters onto stems making sure the locking
and non-locking casters are on the same side.
Locking Caster side
Non-Locking Caster
side