Claridge calyx Nimbus Mobile User manual

Nimbus Mobile
ASSEMBLY INSTRUCTIONS
WARNING
Risk of injury to installers and users
Read the entire assembly directions before
beginning assembly.
Hardware & Tools Required
Tools:
5/32” Allen Key (Not included)
Hardware:
¼”-20 x 5/8” Button Head Hex Screw – 16
¼” lock washer – 16
Swivel Caster – 2
Ridged Caster – 2

800-434-4610
Calyxbyclaridge.com
Ridged Casters
Swivel Casters
Nimbus Mobile
Assembly
1. Gently place Nimbus Mobile on onside as shown
above. (2 people required)
2. Use a 5/32” Allen Key to attach the ¼-20 x 5/8”
Screw with locker washer (4 each per caster)
Attach Ridged casters to the open front section of
the cart.
3. Repeat step 2. To attach the Swivel casters to the
back section of the cart.
4. Carefully return cart to upright position.
Your Nimbus Mobile is now ready for all your storage
needs. Enjoy!