Clarion VRX6570Rz User manual

280-7300-00
VRX6570Rz 9
RADIO mode display
COLOR LCD DISPLAY INFORMATION PANEL
MAIN
SUB
RDS mode display
COLOR LCD DISPLAY INFORMATION PANEL
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM9

10 VRX6570Rz
280-7300-00
CD/MD Changer mode display
COLOR LCD DISPLAY INFORMATION PANEL
TV mode display
COLOR LCD DISPLAY INFORMATION PANEL
SUB
MAIN
SUB
MAIN
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM10

280-7300-00
VRX6570Rz 11
DAB mode display
COLOR LCD DISPLAY INFORMATION PANEL
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM11

12 VRX6570Rz
280-7300-00
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (SUM-3, IECR-6/1.5V) batter-
ies that came with the remote control unit
facing in the directions shown in the figure,
then close the rear cover.
Notes:
Usingbatteriesimproperlycancausethemtoexplode.
Take note of the following points:
•When replacing batteries, replace both batteries
with new ones.
•Do not short-circuit, disassemble or heat batteries.
•Do not dispose of batteries into fire or flames.
•Dispose of spent batteries properly.
5. REMOTE CONTROL
Remote control unit
When the panel is open
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM12

280-7300-00
VRX6570Rz 13
Switches among Radio, DAB, CD changer, MD changer and TV.
Functions of Remote Control Unit Buttons
Notes:
•The remote control unit does not work when the panel is closed.
•Some of the corresponding buttons on the main unit and remote control unit have different functions.
¶FUNC
•BAND
DISC UP
TOP
ªVOLUME
ºSEARCH
⁄PLAY/PAUSE
¤MUTE
‹TA
›DISP
MONI
fiPS/AS
SCN
flAF
RPT
‡PTY
RDM
TV/VTR
WIDE
Button Mode Radio (RDS) CD changer
MD changer
Switches reception band. Moves to the next disc in
increasing order.
Increases and decreases volume (in all modes).
Moves preset channels
up and down.
No function.
Moves tracks up and
down.
When pressed and held
for 1 second:
Fast-forward/
Fast-backward.
Switches between
playback and pause.
Tu r ns mute on and off.
Preset scan.
When pressed and
held for 2 seconds:
Auto store.
AF function on and off.
When pressed and
held for 1 second:
REG function on
and off
PTY standby mode
on and off.
No function.
Scan play.
When pressed and held
for 1 second: Disc scan
play.
Repeat play.
When pressed and held
for 1 second: Disc repeat
play.
Random play.
When pressed and held
for 1 second: Disc
random play.
No function.
TV
Moves preset channels
up and down.
No function.
Switches reception band.
Preset scan.
When pressed and held
for 2 seconds: Auto store.
No function.
Switches between TV and
VTR.
Switches the TV mode.
TA on and off.
Tu r ns on and off the monitor.
38
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM13

14 VRX6570Rz
280-7300-00
6. DCP
2. Lock the DCP/Operation Panel at the upper
center until a click is heard.
3. Press the power button 1to turn on the
power .
CAUTION
•The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
•If the Operation Panel is kept open, the DCP
may drop due to vibration of the car. This
results in damage to the DCP. So close the
Operation Panel or remove the DCP to store
into the case.
•The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Turn the power off.
2. Deeply push in the DCP RELEASE lever 6
to release the DCP/Operation Panel.
3. Pull the DCP toward you and remove it.
Attaching the DCP
1. Hold the DCP/Operation Panel with its rear
side facing the main unit and, as shown in
the figure below, put the lower edge of the
panel onto the corresponding edge of the main
unit.
DCP/RALEASE lever
DCP/Operation Panel
POWER button
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM14

280-7300-00
VRX6570Rz 15
7. CAUTIONS ON HANDLING
LCD panel/Generalities
• Be sure to store the LCD panel inside the
main unit when parking the car outdoors for
long period of time. The LCD panel will oper-
ate properly in a temperature range of 0 to
60°C.
•Don’t allow any liquids on the set from drinks,
umbrellas etc. Doing so may damage the in-
ternal circuitry.
•Do not disassemble or modify the set in any
way. Doing so may result in damage.
•Do not draw the LCD panel out and use it as
a tray. Also, subjecting the LCD panel to
shocks may result in breakage, deformation
or other damage.
•Do not let cigarettes burn the display. Doing
so may damage or deform the cabinet.
•If a problem should occur, have the set in-
spected at your store of purchase.
•Do not insert objects or poke in the space be-
tween the LCD panel and the main unit when
the panel is tilted.
•Do not place anything on the display when
the panel is tilted.
•The remote controller may not work if the re-
mote control sensor is exposed to direct sun-
light.
•In extremely cold weather, the display move-
ment may slow down and the display may
darken, but this is not a malfunction.The dis-
play will work normally when the temperature
increases.
•Small black and shiny spots inside the LCD
panel are normal for LCD products.
•The LCD panel may stop temporarily when it
opens or closes, when the engine stops or
when it is cold.
Cleaning
•Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the dirt.
For tough dirt, apply some neutral detergent
diluted in water to a soft cloth, wipe off the dirt
gently, then wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving rubber
or plastic products in contact with the cabinet
for long periods of time may cause stains.
•Cleaning the LCD panel
The LCD panel tends to collect dust, so wipe it
off occasionally with a soft cloth. The surface is
easily scratched, so do not rub it with hard ob-
jects.
For a longer service life, be sure to read the following cautions.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM15

16 VRX6570Rz
280-7300-00
8. OPERATIONS
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
CAUTION
When the unit is turned on, starting and stop-
ping the engine with its volume raised to the
maximum level may harm your hearings. Be
careful about adjusting the volume.
Note:
•Use this unit after starting the engine.
Turning on and off the power
Note:
•Becarefulabout using this unit for a long time with-
out running the engine. If you drain the car’s bat-
tery too far, you may not be able to start the en-
gine and this can reduce the service life of the
battery.
1. Press the POWER button 1.
2. The illumination and display on the unit light
up.The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press andhold the POWER button 1for1 sec-
ond or longer to turn off the power for the unit.
Note:
•About the “SYSTEM CHECK”
The confirmation of connected equipment must be
performed for this unit only when the wiring con-
nection is complete and power is turned on to the
unit first. When the power is supplied, “SYSTEM ”
and “PUSH PWR” appear alternately in the dis-
play. Press the POWER button 1 , the system
check starts inside the unit. When “COMPLETE”
appears, press once again the POWER button 1 .
Selecting a mode
1. PresstheFUNCbutton1tochangethemode
of operation.
2. Each time you press the FUNC button 1, the
mode of operation changes in the following
order:
Radio mode ➜DAB mode ➜CD changer
mode ➜MD changer mode ➜TV mode ➜
Radio mode...
∗External equipment not connected with CeNET
is not selected.
Adjusting the volume
Operate the VOLUME button 2in the direction
of the arrows ww
ww
w(up) or zz
zz
z(down) to adjust the
volume;
ww
ww
w: Increases the volume.
zz
zz
z: Decreases the volume.
∗The volume level indicated in the display is in a
range from 0 (minimum) to 33 (maximum).
CAUTION
While driving, keep the volume at a level at
which external sounds can be heard.
Switching the display
When the panel is closed:
Press the DISP button @

 to select the desired dis-
play.
Each time you press the DISP button @, the dis-
play switches in the following order:
Notes:
•Once selected, the preferred display becomes the
default display. When a function adjustment such
as volume is made, the display momentarily
switches to that function’s display, then returns
back to the preferred display several seconds af-
ter the adjustment.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM16

280-7300-00
VRX6570Rz 17
Basic Operations
• If a title has been input, it is shown in the SUB dis-
play. If no title has been input, “---------” appears in
the display. To input a title, refer to the subsection
“Entering titles” in “Other Functions” section.
•For CD, MD and TV, some special characters of
the title, the PS name of the RDS, and the DAB
service label will not be displayed on the Informa-
tion Panel of the DCP. In this case, those charac-
ters will only be left blank.
•When CT data is not received, “CT--:--” appears
in the display.
Showing a mode display
When the panel is open:
Press the TITLE button ¢to show the Title List
display.In theTitle List display, the titles of items
stored in the PRESET buttons #1to 6 are listed.
∗In the RDS tuner mode, a PS name is displayed.
∗In the DAB mode, a service label is displayed.
∗For detailed information, refer to the section“Title
list play”.
Opening and turning the display
Notes:
•Do not place any object on the open display.
•Do not drop any object on the movable part.
•Do not expose the display to shocks.
1. Press the OPEN button !to open the Color
LCD display ¥.
∗If the Color LCD display ¥is left horizontally
in the open position for 10 seconds or longer,
it is automatically drawn in.
2. Turn the Color LCD display ¥upwards to a
good view angle.
When the monitor is turned upwards, a pic-
ture appears in the display. The Information
Panel 4display disappears.
CAUTION
Do not turn the display unless it is completely
open.
When adjusting the angle of the display be
careful no to let your fingers get caught by
the panel or instrument panel of the vehicle.
3. To store the Color LCD display ¥in the source
unit, turn it to the horizontal position until a
click is heard.
Turning on and off the monitor
Pressing the DISP button @turns the monitor
on and off.
∗When a button is pressed or during security moni-
toring, the monitor-off mode is canceled.
Mute
Each time you press the MUTE button

$, mute
is turned on and off.
“MUTE” appears when mute is turned on.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect
stored in memory. Select the one you prefer.
∗The factory default setting is “Z-EHCR OFF”.
When a Z-enhancer comes on (1-3), “Z-EHCR”
appears in the display.
•“Z-EHCR 1” (Z-Enhancer 1):
Setting emphasizing bass.
•“Z-EHCR 2” (Z-Enhancer 2):
Setting emphasizing treble.
•“Z-EHCR 3” (Z-Enhancer 3):
Setting emphasizing bass and
treble.
•“Z-EHCR OFF” (Z-Enhancer off):
Neither bass nor treble are empha-
sized by the Z-enhancer.
Note:
•Incapable of operation when connecting DSP
(DPH7500Z).
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM17

18 VRX6570Rz
280-7300-00
Basic Operations
When the panel is closed:
Each time you press the Z-EHCR button 9, the
tone effect changes in the following order:
“Z-EHCR 1” ➜“Z-EHCR 2” ➜“Z-EHCR 3” ➜
“Z-EHCR OFF” ➜“Z-EHCR 1”...
When the panel is open:
1. Press the A-M button ™to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK §upward or down-
ward to select “Z-EHCR”. Press the ENT at
the center of the JOYSTICK §to change into
the Z-enhancer selecting display.
3. Operate the JOYSTICK §upward or down-
ward to select out of:
“TYPE 1” (Z-Enhancer 1) “TYPE 2” (Z-En-
hancer 2) “TYPE 3” (Z-Enhancer 3)
“OFF” (Z-Enhancer off),
and press the ENT at the center of the JOY-
STICK §to set a desired Z-enhancer.
4. When the setting is finished, operate the JOY-
STICK §rightward or leftward to move the
cursor to the “MENU”. Then press the ENT at
the center of the JOYSTICK §to return to
the AUDIO-MODE display.
∗ To return from the AUDIO-MODE display to the
STANDARD display, press the A-M button


™
once again.
Adjusting the Z-enhancer
Note:
•This function is enabled only when the panel is
open.
1. Press the A-M button ™to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK § upward or down-
ward to select “ Z-EH LVL ” level. Press the ENT
at the center of the JOYSTICK § to change
into the Z-enhancer adjusting display .
3. Operate the JOYSTICK §upward or down-
ward to adjust the Z-enhancer level.
∗When Z-Enhancer 1 is selected, you can adjust
the bass in the range of ±2.
∗When Z-Enhancer 2 is selected, you can adjust
the treble in the range of ±2.
∗When Z-Enhancer 3 is selected, you can adjust
the bass and treble in the range of ±2.
4. When the adjustment is finished, operate the
JOYSTICK

§rightward or leftward to move
the cursor to “MENU”. Then press the ENT at
the center of the JOYSTICK §to return to
the AUDIO-MODE display.
Adjusting the bass and treble
Notes:
•This function is enabled only when the panel is
open.
•This function can be adjusted only when the Z-
enhancer is OFF.
1. Press the A-M button ™to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK §upward or down-
ward to select “BAS/TRE”. Then press the
ENT at the center of the JOYSTICK §to
change into the BASS/TREBLE adjusting dis-
play.
3. Operate the JOYSTICK §rightward or left-
ward to adjust the “BASS” or “TREBLE”.
4. Operate the JOYSTICK §upward or down-
ward to adjust a level (adjustment range: from
-6 to 6).
5. When the adjustment is finished, operate the
JOYSTICK §rightward or leftward to move
the cursor to “MENU”. Then press the ENT at
the center of the JOYSTICK §to return to
the AUDIO-MODE display.
Adjusting the balance and fader
Note:
•This function is enabled only when the panel is
open.
1. Press the A-M button ™to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK §upward or down-
ward to select “BAL/FAD”. Then press the
ENT at the center of the JOYSTICK §to
change into the BAL/FAD adjusting display.
3. Operate the JOYSTICK §rightward or left-
ward to select “BALANCE” or “FADER”.
4. Operate the JOYSTICK § upward or down-
ward to make an adjustment.
Adjusting range of the balance: L13 to R13
Adjusting range of the fader: front 12 / rear 12
5. When the adjustment is finished, operate the
JOYSTICK §rightward or leftward to move
the cursor to “MENU”. Then press the ENT at
the center of the JOYSTICK §to return to
the AUDIO-MODE display.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM18

280-7300-00
VRX6570Rz 19
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
∗This function is enabled only when the panel is
open.
1. Press the A-M button ™for 1 second or longer
to select Loudness ON. The “LD” indicator
lights in the display.
2. Press the A-M button ™for 1 second or longer
to select Loudness OFF. The “LD” indicator
goes off.
Note:
• When using a sold separately digital sound processor
(DPH7500z), a feature called auto loudness is selected.
This function is different from the loudness effect. For
further details on the auto loudness feature, refer to the
subsection “Output adjustment of auto loudness,
subwoofer and playback band”.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the
DISP button @to switch to CT display.
∗If CT is not being received, “CT--:--” appears in
the display.
Note:
•CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not be displayed accurately.
Basic Operations
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM19

20 VRX6570Rz
280-7300-00
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the BAND button %and select the de-
sired band. (FM or AM (MW/LW))
∗If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “SRCH” is lit),
press and hold the BAND button %

for 1 sec-
ond or longer. “MANU” appears in the display
(or when the panel is closed, the indicator
“SRCH” goes off) and manual tuning is now
available.
2. Tune into a station.
●Quick tuning:
Press and hold the right or left side of the
SEARCH button 2for 1 second or longer to
tune in a station.
●Step tuning:
Press the right or left side of the SEARCH but-
ton 2to manually tune in a station.
Note:
•Manual tuning is cancelled if you do not oper-
ate the unit for 7 seconds or longer.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
PRESET button #recalls the stored radio fre-
quency automatically.
1. Press the BAND button %and select the de-
sired band. (FM or AM (MW/LW))
2. Press the corresponding PRESET button #
to recall the stored station.
∗Press and hold one of the PRESET buttons #
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Press the BAND button %and select the de-
sired band. (FM or AM (MW/LW))
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Press and hold one of the PRESET buttons
#for 2 seconds or longer to store the cur-
rent station into preset memory.
Radio Operations
Listening to the radio
1. Press the FUNC button 1and select the RA-
DIO mode. The frequency or PS is displayed.
∗PS: Programme service name
2. Press the BAND button %and select the ra-
dio band. Each time the button is pressed,
the radio reception band changes in the fol-
lowing order:
FM1 ➜FM2 ➜FM3 ➜AM (MW/LW)➜FM1...
3. Press the right or left side of the SEARCH but-
ton 2 to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can tune in to receivable broadcast
stations; LOCAL SEEK can tune in to only broad-
cast stations with a good reception condition.
1. Press the BAND button %and select the de-
sired band. (FM or AM (MW, LW))
2. Tune in to a station.
∗If “MANU” is lit in the display (or when the panel
is closed, if the indicator “SRCH” is not lit) press
and hold the BAND button %for 1 second or
longer.“MANU” in the display goes off (or when
the panel is open the indicator “SRCH” lights)
and seek tuning is now available.
∗If “TA” is lit in the display, TP stations are auto-
matically sought.
●DX SEEK
Press the right or left side of the SEARCH
button 2to automatically seek a station.
When the right side of the SEARCH button
2is pressed, the station is sought in the di-
rection of higher frequencies; when the left
side of the SEARCH button 2is pressed, the
station is sought in the direction of lower fre-
quencies.
∗When seek tuning starts, “DX SEEK” appears
in the display.
● LOCAL SEEK
If you press and hold the right or left side of
the SEARCH button 2for 1 second, local
seek tuning is carried out. Broadcast stations
with good reception condition are selected.
∗When local seeking starts, “LO SEEK” appears
in the display.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM20

280-7300-00
VRX6570Rz 21
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a pre-
viously stored station remains unoverwritten at
the memory position.
1. Press the BAND button %and select the de-
sired band. (FM or AM (MW/LW))
2. Press and hold the PS/AS button 5for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
∗If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order.This function is useful when
searching for desired station in memory.
1. Press the PS/AS button 5.
2. When the desired station is tuned in, press
the PS/AS button 5again to continue receiv-
ing that station.
Radio Operations
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM21

22 VRX6570Rz
280-7300-00
RDS (Radio Data System)
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS
data. This system can display the name of the
broadcast station being received (PS) and can
automatically switch to the broadcast station with
the best reception as you move long distances
(AF switching). Also, if a traffic announcement or
programme type information is broadcast from
an RDS station, no matter what mode you are
in, this broadcast is received.Additionally, if EON
information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic an-
nouncement and/or chosen program type from
other stations (TP). This function is not available
in some areas.
When using the RDS function, always set the
radio to FM mode.
• “AF”:Alternative Frequency
• “PS”:Programme Service Name
• “PTY”:Programme Type
• “EON”: Enhanced Other Network
• “TP”:Tr affic Programme
∗RDS interrupt does not function during AM radio
reception or in TV mode.
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
∗The factory default setting is “ON”.
● Switching OFF the AF function
Press the AF button 7. The “AF” indicator goes
off.
● Switching ON the AF function
Press the AF button 7. The “AF” indicator lights.
∗If the reception of the current broadcast station
deteriorates durably, “SEARCH” lights in the dis-
play and the radio searches for the same
programme on another frequency.
∗When the reception deteriorates, the “AF” indica-
tor flickers.
● AF function between RDS and DAB
When the same programme is broadcast by both
RDS and DAB, and this function is ON, the unit
switches automatically to the broadcast with the
better reception.
∗This function only operates when the DAH9500z
DAB unit, sold separately, is connected.
RDS Operations
1. Press the ADJ button £to show the adjust-
ment selection display.
2. Operate the JOYSTICK §upward or down-
ward to select “LINKACT”.
3. Operate the JOYSTICK §rightward or left-
ward to select “ON” or “OFF”. After selection,
press the ENT at the center of the JOYSTICK
§.
●ON:
AF switching between DAB and RDS en-
abled.
●OFF:
AF switching between DAB and RDS dis-
abled.
4. Press the ADJ button £to return to the pre-
vious mode.
REG (Regional programme) function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗The factory default setting is “OFF”.
Notes:
•This function is disabled when a national station
such as BBC 2 FM is being received.
•The REG function ON/OFF setting is valid when
the AF function is ON.
● Turning the REG function ON
When “REG” is not lit in the display, press and
hold the AF button 7for 2 seconds or longer.
“REG” lights in the display.
● Turning the REG function OFF
Press and hold the AF button 7for 2 seconds
or longer. “REG” in the display goes off.
Manually tuning a regional station
in the same network
Note:
•This function can be used when a regional broad-
cast of the same network is received.
1. This function is valid when the AF function is
ON and the REG function is OFF.
2. Press any one of the PRESET buttons #to
call out a regional station.
3. Each time you press the same PRESET but-
ton #, the unit switches from a local station
to the other on the same network.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM22

280-7300-00
VRX6570Rz 23
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗RDS interrupt does not function during AM radio
reception or in TV mode.
∗This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0when only “TP” is
lit in the display, “TP” and “TA” light in the dis-
play and the unit is set into TA standby mode
until a traffic announcement is broadcast. When
a traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the TA
button 0while a traffic announcement broad-
cast is being received, the traffic announcement
broadcast reception is cancelled and the unit
goes into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” are lit in the display, press
the TA button 0. The “TA” in the display goes
off and TA standby mode is cancelled.
∗If “TP” is not lit, pressing the TA button 0searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the TA button
0, “TA” lights in the display and the unit auto-
matically searches a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing the TA button 0
again makes the “TA” indicator go off and stops
TP station searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. With “TA” lit in the display, press the PS/AS
button 5for 2 seconds or more.
2. The TP stations with the good reception con-
dition are stored into preset memory.
∗Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a broad-
cast of the selected programme type when it
starts, even if the unit operates on a function
mode other than radio.
∗RDS interrupt does not function during AM radio
reception or in TV mode.
∗Some countries do not yet have PTY broadcast.
∗In TA standby mode, a TP station has priority over
a PTY broadcast station.
Selecting PTY
1. When you press the PTY button 8, the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons #to
select a desired PTY. Alternatively, when the
panel is closed, operate the SEARCH

but-
ton 2upward or downward to select a de-
sired PTY.
∗Below are the factory default settings stored
for the PRESET buttons #.
3. The PTY select mode is cancelled automatically
7 seconds after a PTY is selected.
●Cancelling PTY standby mode
When you press the PTY button 8for 1 second
or longer, the indicator “PTY” goes off and PTY
standby mode is cancelled.
●Cancelling a PTY interrupt broadcast
Press the PTY button 8, during the PTY inter-
rupt broadcast to display the subsidiary, the PTY
interrupt is cancelled and the unit returns to PTY
standby mode.
PTY seek
1. Press the PTY button 8, the PTY select mode
is turned on.
2. Select a desired PTY.
3. Press the right or left side of the SEARCH
button 2. If you press the right side, the unit
seeks a PTY broadcast moving up the fre-
quencies; if you press the left side, it seeks
moving down the frequencies.
PTY item
ENGLISH Contents
1NEWS News
2INFO Information
3POP M Pop music
4SPORT Sports
5CLASSICS Classics
6M,O,R,M Middle of the road music
Preset
number
RDS Operations
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM23

24 VRX6570Rz
280-7300-00
∗If no station with the selected PTY broadcast
can be received, the unit returns to the MAIN
mode.
PTY preset memory
1. When you press the PTY button 8, the PTY
select mode is turned on.
2. Select a desired PTY.
3. If you press and hold any one of the PRESET
buttons #for 2 seconds or longer, the se-
lected PTY is stored into that preset channel
memory.
The 29 types of PTY below can be selected.
Operating the PTY SELECT display
when the panel is open
1. Press the PTY button 8to select the PTY
SELECT display.
2. In the PTY SELECT display, PTY is selected
and PTY memory can be adjusted.
Operate the JOYSTICK §rightward or left-
ward to select “PTY ITEM” or “PRESET” (by
moving the cursor).
3. When “PTY ITEM” is selected, PTY selection
is carried out. Operate the JOYSTICK §up-
ward or downward to select a desired PTY.
Press the ENT at the center of the JOYSTICK
§to set the selected PTY ITEM.
(The PTY ITEM thus set is listed at the lower
right of the display.)
4. When “PRESET” is selected, PTY preset
memory can be called for and stored.
5. Operate the JOYSTICK §upward or down-
ward to select Preset Nos. 1 to 6.
6. Press the ENT at the center of the JOYSTICK
§to call for the preset PTY ITEM.
Press the ENT at the center of the JOYSTICK
§for 2 seconds to store the PTY ITEM cur-
rently selected to any Preset No. selected
(listed at the lower right of the display).
7. After adjustment is finished, operate the JOY-
STICK §rightward or leftward to move the
cursor to “MENU”, and press the ENT at the
center of the JOYSTICK §to return to the
STANDARD display.
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped. “ALARM”
appears in the display and the emergency broad-
cast can be heard.
∗RDS interrupt does not function during AM radio
reception or in TV mode.
● Cancelling an emergency broadcast
If you press the AF Button 7, emergency broad-
cast reception is cancelled.
PTY item
ENGLISH Contents
NEWS News
AFFAIRS Today’s events
INFO Information
SPORT Sports
EDUCATE Education
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Variety
POP M Pop music
ROCK M Rock music
M,O,R, M Middle of the road music
LIGHT M Light music
CLASSICS Classics
OTHER M Other music
WEATHER Weather
FINANCE Finance
CHILDREN For children
SOCIAL A Social affairs
RELIGION Religion
PHONE IN Phone in
TRAVEL Tr a v e l
HOBBIES Hobbies
JAZZ Jazz
COUNTRY Country
NATIONAL National
OLDIES Oldies
FOLK M Folk music
DOCUMENT Documentaries
RDS Operations
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM24

280-7300-00
VRX6570Rz 25
Switching the PTY display language
Note:
• This function is enabled only when the panel is
open.
You can select one of 4 languages (English, Ger-
man, Swedish or French) for the PTY displayed
in the display.
∗The factory default setting is “GB” (English).
1. Press the ADJ button £to show the adjust-
ment selection display.
2. Operate the JOYSTICK §upward or down-
ward to select "PTY LANG".After that, select
a desired language by operating the JOY-
STICK§rightward or leftward and thenpress
the ENT at the center of the JOYSTICK §to
change the setting.
“GB”: English
“F”: French
“D”: German
“S”: Swedish
3. Press the ADJ button £. The unit returns to
the previous mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗The factory default setting is “15”.
During aTA, ALARM or PTY interrupt, operate
the VOLUME button

2upward or downward
to set the volume to the desired level (00 to
33).
∗When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
RDS Operations
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM25

26 VRX6570Rz
280-7300-00
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions.This unit can control a total
of 2 changers (MD and/or CD).
Press the FUNC button 1and select the CD
changer mode to start play. If 2 CD changers are
connected, press the FUNC button 1to select
the CD changer for play.
∗If “NO MAG” appears in the display, insert the
magazine into the CD changer. “LOADING” ap-
pears in the display while the player loads (checks)
the magazine.
∗If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press the PLAY/PAUSE button 3to pause
play. “PAUSE” appears in the display.
2. To resume play, press the PLAY/PAUSE but-
ton 3again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Each time you press and hold the DISP button
@for 1 second or longer, the title display changes
in the following order.
When the panel is closed:
User title (disc) ➜CD-text title (disc) ➜CD-text
title (track) ➜User title (disc)...
When the panel is open:
User title (disc) ➜CD-text title (disc & track) ➜
User title (disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “----------” appears in the dis-
play.
● Scrolling a CD-text title
When a CD-text title is longer than 16 charac-
ters (8 characters when the panel is closed), you
can scroll the display as follows.
When the panel is closed:
1. Display the CD-text title (disc or track).
2. Press and hold the BAND button %for 1 sec-
ond or longer. The titles scroll.
When the panel is open:
1. Display the CD-text title (disc & track).
2. Press and hold the TITLE button ¢for 1 sec-
ond or longer to scroll the disc title.
3. To scroll the track title, press for 1 second or
longer the TITLE button ¢ within 30 seconds
after scrolling the disc title.
Notes:
• If the disc title is shorter than 16 characters, the
track titles begin to scroll immediately.
• If the track title is shorter than 16 characters, the
track titles does not scroll.
Selecting a CD
Each of the DIRECT buttons #corresponds to
a disc loaded into the magazine.
● Selecting a disc from 1 to 6
Press the corresponding DIRECT button (1 to 6)
#

to select the desired disc.
●Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press the corresponding DIRECT button (7 to 12)
#for 1 second or more, then select the desired
disc.
Selecting a track
● Track-up
1. Press the right side of the SEARCH button
2to move ahead to the beginning of the next
track.
2. Each time you press the right side of the
SEARCH button 2, the track advances ahead
to the beginning of the next track.
● Track-down
1. Press the left side of the SEARCH button 2
to move back to the beginning of the current
track.
2. Press the left side of the SEARCH button 2
twice to move to the beginning of the previ-
ous track.
VRX6570Rz(En)(26-52) 06.3.6, 11:50 AM26

280-7300-00
VRX6570Rz 27
Fast-forward/Fast-backward
● Fast-forward
Press and hold the right side of the SEARCH
button 2for 1 second or longer.
● Fast-backward
Press and hold the left side of the SEARCH but-
ton 2for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
● When playing a disc 1 to 6
Press the DIRECT button #(1 to 6) with the
same number as the CD playing.
● When playing a disc 7 to 12 (only when a 12
disc CD changer is used.)
Press the DIRECT button #(7 to 12) with the
same number as the CD playing for 1 second or
longer.
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is cancelled
or the mode is changed.
∗The scan play is useful when you want to select a
desired track.
1. Press the SCN button 5to start scan play.
2. Press the SCN button 5again to cancel the
scan play. Current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the cur-
rently selected CD changer. This function con-
tinues automatically until it is cancelled or the
mode is changed.
∗The disc scan play is useful when you want to se-
lect a desired CD.
1. Press the SCN button 5for 1 second or
longer to start disc scan play.
2. Press the SCN button 5again to cancel disc
scan play. Normal disc play continues on the
current track.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled or the mode is changed.
1. Press the RPT button 7, to make repeat play
starts. “RPT” lights in the display.
2. To cancel repeat play, press the RPT button
7again. “RPT” goes off from the display and
the unit returns to normal play.
Disc repeat play
After all tracks in the current disc have been
played, the disc repeat play automatically replays
the current disc over from the first track.This func-
tion continues automatically until it is cancelled
or the mode is changed.
1. When you press the RPT button 7

for 1 sec-
ond or longer, disc repeat play starts. “D-RPT”
lights in the display.
2. To cancel disc repeat play, press the RPT
button 7again. “D-RPT” goes off from the
display and the unit returns to normal play
from the track being played.
Random play
The random play selects and plays individual
tracks on the disc in no particular order. This func-
tion continues automatically until it is cancelled
or the mode is changed.
1. When you press the RDM button 8, random
play starts. “RDM” lights in the display.
2. To cancel random play, press the RDM but-
ton 8again. “RDM” goes off from the dis-
play and the unit returns to normal play.
Disc random play
The disc random play selects and plays individual
tracks or discs automatically in no particular or-
der. This function continues automatically until it
is cancelled or the mode is changed.
1. When you press the RDM button 8for 1 sec-
ond or longer, disc random play starts. “D-
RDM” lights in the display.
2. To cancel disc random play, press the RDM
button 8

again. “D-RDM” goes off from the
display and the unit returns to normal play
from the track being played.
CD Changer Operations
VRX6570Rz(En)(26-52) 06.3.6, 11:50 AM27

28 VRX6570Rz
280-7300-00
MD Changer Operations
MD changer functions
When an optional MD changer is connected
through the CeNET cable, this unit controls all
MD changer functions. This unit can control a
total of 2 changers (MD and/or CD).
Press the FUNC button 1and select the MD
changer mode to start play. If 2 MD changers
are connected, press the FUNC button 1to se-
lect the MD changer for play.
∗If “NO DISC” appears in the display, load MDs into
the MD changer.
Pausing play
1. Press the PLAY/PAUSE button 3to pause
play. “PAUSE” appears in the display.
2. To resume play, press the PLAY/PAUSE but-
ton 3again.
Switching disc titles and track
titles
This unit can display disc titles and track titles
already entered on MDs. Titles up to 128 char-
acters long can be displayed by scrolling the
titles.
∗Titles cannot be entered for MDs with this unit.
When the panel is closed:
1. Press the DISP button @to show the SUB
display.The disc title or track title is displayed.
2. Each time you press and hold the DISP but-
ton @for 1 second or longer, the display
toggles between the disc title and the track
title.
When the panel is open:
Both disc and track titles are displayed.
Scrolling titles
When a title is longer than 16 characters (or 8
characters if the panel is closed), you can scroll
through it with the following operation.
When the panel is closed:
1. Display the MD title (disc or track).
2. Press the BAND button %for 1 second or
longer. The display scrolls through the title.
When the panel is open:
1. Press the TITLE button ¢for 1 second or
longer to scroll through the disc title.
2. To scroll the track title, press for 1 second or
longer the TITLE button ¢ within 30 seconds
after scrolling the disc title.
Notes:
• When the disc title is within 16 characters, the title
is scrolled immediately.
• If the track title is shorter than 16 characters, the
track titles does not scroll.
Selecting an MD
Each of the DIRECT button #corresponds to
an MD loaded into the MD changer.
Press the DIRECT button #(1 to 6) and select
the desired MD.
Selecting a track
● Track-up
1. Press the right side of the SEARCH button
2to move ahead to the beginning of the next
track.
2. Each time you press the right side of the
SEARCH button 2, the track advances ahead
to the beginning of the next track.
● Track-down
1. Press the left side of the SEARCH button 2
to move back to the beginning of the current
track.
2. Press the left side of the SEARCH button 2
twice to move to the beginning of the previ-
ous track.
Fast-forward/Fast-backward
● Fast-forward
Press and hold the right side of he SEARCH but-
ton 2for 1 second or longer.
● Fast-backward
Press and hold the left side of he SEARCH but-
ton 2for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
Press the DIRECT button #(1 to 6) with the
same number that the MD playing.
∗If an MD is not loaded in a slot of the MD changer,
pressing the DIRECT button #corresponding to
its disc number is invalid.
VRX6570Rz(En)(26-52) 06.3.6, 11:50 AM28