10
English
M255
Radio Mode Operations
Auto store function
(Automatic Station Store)
1. Press
[BND]
button to select the desired band
FM1, FM2, FM3 or AM.
2. Press and hold the [P/A]button for 2 seconds
or longer. The stations at which the reception
is the strongest will be automatically stored in
memory.
Manual tuning
1. Press
the [BND]
button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the
[BND]
button for 2 sec-
onds or longer, then the "
MANU" is lit in the
display, which means that a manual selection
function is on.
3. Press the
[ ] or [ ] button to manually tune
in a station.
Seek tuning
1. Press
the [BND]
button to select the desired
band FM1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the
[BND]button for 2 seconds or longer.
When the "MANU"
display is off, the seek tun-
ing is now available.
3. Press the
[ ] or [ ] button to automatically
seek in a station.
Preset memory function
Preset Memory Function can store up to 24
stations: six stations for each of FM1, FM2, FM3
and AM.
Manual memory function
1. Press the [BND]button, to select a band you
want to store in the memory.
2. Press the [ ] or [ ] button to tune into a
desired station.
3. Press and hold one of the [DIRECT]buttons
for 2 seconds or longer to store the current
station into preset memory.
Notes:
• When the auto store is performed, the station pre-
viously stored in memory at that position is over-
written.
• When the number of stations stored is less than
six, the previous memory content for each direct
button will be retained.
Preset scanning
(Preset Station Scan)
When the [
P/A
]button is pressed, "SCN" will be
indicated with preset memory numbers, and the
stations are tuned in for 7 seconds each, in the
order in which they were stored. Press the [
P/A
]
button again to cancel the preset scanning mode.
Instant station recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1. Press the [FNC]button, then select the radio
mode.
2. Select the radio station whichyouwant to store
in the memory.
3. Press and hold the [ISR]button for 2 seconds
or longer.
Recalling ISR
Press the [ISR]button and the display will show
"ISR". Then the radio station previously memo-
rizedwill be selected. Pressthe [ISR]button again
to disengage the unit from recalling the ISR func-
tion.
FM reception
For enhanced FM performance the
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Listening to the radio
1. Press the [FNC]button and select the radio
mode. then the radio will be on.
2. To select a preset band, press the
[BND]but-
ton, then select one of the preset bands such
as
FM1, FM2, FM3 or AM. Every time the
[BND]
button is pressed, the display will change as:
FM1ÆÆ
ÆÆ
ÆFM2 ÆÆ
ÆÆ
ÆFM3 ÆÆ
ÆÆ
ÆAM ÆÆ
ÆÆ
ÆFM1
3. Press the [ ] or [ ] button to tune in the
desired station.
