10
English
4. Select the Authentication and Security tab.
ENGLISH
a. Authentication Type
– Specifies the type of security
used by the base station.
“OPEN”, “WPA”, “WPA-
PSK”, “WPA2”, “WPA2-PSK”,
“LEAP” or “SHARED”.
b. Encryption – Selects the type
of encryption depending on
the previous selection.
c. WEP Key – Selects one of the
four WEP keys to use as the
preselected WEP security key.
d. In order to select a WEP key,
you must first enter the HEX
or ASCII key required by the
access point/router.
1) Select one of the four places to enter a WEP key.
2) Select Hex or ASCII.
3) Hex provides a higher level of security than ASCII. If you are connected
to a Gigabyte router or access point, you can only use Hex.
4) Enter the password, 26 characters for Hex or 13 characters for ASCII.
5) Press OK to confirm and save the settings.
6) Select the Advanced tab. Under this tab are different transfer
settings options.
ENGLISH
