Claypaky ACTORIS PARLED User manual

1
INSTRUCTION MANUAL
ENGLISH
INDEX
Page Contents
2 1. Safety information
3 2. Unpacking and preparation
3 3. Installation and start-up
33.1 Installing the fixture
4 3.2 Connecting to manis supply
5 3.3 Connecting the control signal line: DMX / Art-Net
5 3.4 Switching on the fixture and basic SetUp
7 4. Maintenance
74.1 Maintenance and Caution
84.2 Battery removal
9 4.3 Opening the covers
10 5. Dimensions
10 6. Cause and solution of problems
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.
ACTORIS PARLED
ACTORIS PARLED RGBW
AL2595
AL2596

2
ACTORIS PARLED & RGBW
EN
IT
DE
ES
FR
RU
SAFETY INFORMATION
IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS029 – Safety Information Actoris ParLED & RGBW]
INFORMAZIONI DI SICUREZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS029 – Safety Information Actoris ParLED & RGBW]
INFORMATIONEN ZUR SICHERHEIT
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS029 – Safety Information Actoris ParLED & RGBW]
INFORMACIONES DE SEGURIDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS029 – Safety Information Actoris ParLED & RGBW]
CONSIGNES DE SÉCURITÉ
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com
Réf. : [FIS029 – Safety Information Actoris ParLED & RGBW]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекомендует внимательно прочитать исохранить инструкцию по технике безопасности
данного изделия, которая всегда доступна вэлектронном формате по следующей ссылке:
www.claypaky.com
Наименование:[FIS029 – Safety Information Actoris ParLED & RGBW]
1. SAFETY INFORMATION

3
ACTORIS PARLED & RGBW
Packing contents - Fig. 1
1
2. UNPACKING AND PREPARATION
2
Installing the projector - Fig. 2
The projector can be installed on the floor on a truss or on the ceiling or wall.
WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing point.
3. INSTALLATION AND START-UP
3.1 Installing the fixture
Continue ‘

4
ACTORIS PARLED & RGBW
Mains
5
Connecting to the mains supply - Fig. 5
1
1
2
3
2
1
2
3
2
1
4
Connecting and disconnecting power cable - Fig. 4
LCD Display
Functional buttons
Power inDMX IN Ethernet
Power out
DMX THRU Fuse
3
Control Panel - Fig. 3
3.2 Connecting to manis supply

5
ACTORIS PARLED & RGBW
Switching on the projector - Fig. 7
Plug-in the power connector. The projector starts the reset procedure. At the same time, the following information scrolls on the display:
Actoris ParLED
Version X.X.X
Date - Hour
The control panel (Fig. 7) has a display and buttons for the complete programming and management of the projector menu. The display can be in one
of two conditions: standby or setting status. When it is in standby, the display shows the projector’s DMX address.
During the setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns in standby. It
should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the ENTER key will be cancelled.
Dmx Address
001
Actoris ParLED 24°C
Ext.8Bit DMX
Menu
Enter
Up
Down
7
Connecting to the control signal line (DMX) - Fig. 6
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors. IP66 line is recommended.
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Ethernet
6
Continue ‘
3.3 Connecting the control signal line: DMX / Art-Net
3.4 Switching on the fixture and basic SetUp
001
Actoris ParLED 24°C
Ext.8Bit DMX
Menu
Enter
Up
Down
001
Actoris ParLED 24°C
Ext.8Bit DMX
Menu
Enter
Up
Down
Reversal of the display - Fig. 8
To activate this function, press UP and DOWN keys simultaneously while the display is in standby. This status will be memorised and maintained even
for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
Setting the projector starting address
On each projector, the starting address must be set for the control signal.
The address can also be set with the projector switched off.
8

6
ACTORIS PARLED & RGBW
Functions of the buttons - Using the menu
Setting addresses and options with the projector disconnected
The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
ENTER (E) to momentarily activate the display and thus access the settings. Once the required operations have been
carried out, the display will switch off again after a wait time of 30 seconds.
IMPORTANT: To Unlock the display press the buttons sequence UP – DOWN – UP – DOWN – ENTER.
USING THE MENU:
1) Press MENU once – “Main Menu” appears on the display.
2) Use the UP and DOWN keys to select the menu to be used:
• Setup: To set the setting options.
• Option: To set the operating options
• Information: To read the counters, software version and other information.
• Manual Control: To trigger the test and manual control functions.
• Test: To check the proper functioning of effects
• Advanced: Access to the "Advanced menu" is recommended for a trained technical personnel.
3) Press to display the first item in the selected menu.
4) Use the UP and DOWN keys to select the MENU items.
Menu
Up
Down
Up
Down
Menu
Enter
Confirms the displayed value, or activates the displayed function, or enters the successive menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level
Enter
Down
Up
Menu

7
ACTORIS PARLED & RGBW
CAUTION:
• It is recommended not to use compressed air with more than 4 atmospheres for cleaning the internal parts of the fixture, led board area.
This is to avoid damaging electronic components.
•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
- General cleaning of internal parts.
- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.
Cleaning the lenses
Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other
detergent could damage the lenses).
Light collimation system
This product contains internal light
collimation system. Avoid intense
light from any angle.
Continue ‘
9
WARNING:
no alcohol
4. MAINTENANCE
4.1 Maintenance and Caution

8
ACTORIS PARLED & RGBW
1
2
3
Battery removal - Fig. 10
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
10
4.2 Battery removal

9
ACTORIS PARLED & RGBW
1
2
4
3
3
11
Opening the covers - Fig. 11
4.3 Opening the covers
Disconnect the wirings before
to remove the rear cover.

341
(13.42")
325
(12.79")
275
(10.83")
Actoris ParLED & RGBW
5. DIMENSIONS
10
ACTORIS PARLED & RGBW
THE PROJECTOR WILL NOT SWITCH ON
PROBLEMS
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PROJECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No mains supply.
LED exhausted or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Lenses broken
Dust or grease deposited.
Check the power supply voltage.
Call an authorised technician.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
6. CAUSE AND SOLUTION OF PROBLEMS

11
ACTORIS PARLED & RGBW

www.claypaky.com – Service support & Helpdesk: https://e-assist.tech
IST02J/001 – EN - Rev.B 09/2023