Claypaky REFLEXCTXION User manual

1
CA3000
INSTR CTION MAN AL
ENGLISH
REFLECTXION
INDEX
Page Contents
2 1. Safety information
3 2. npacking and preparation
4 3. Installation and start-up
4 3.1 Installing the fixture
4 3.2 Connecting to manis supply
5 3.3 Connecting the control signal line: DMX / Art-Net
5 3.4 Switching on the fixture and basic SetUp
7 4. Maintenance
7 4.1 Periodical cleaning
8 4.2 Battery removal
9 5. Specifications
10 6. Cause and solution of problems
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.

2
REFLECTXION
EN
IT
DE
ES
FR
R
SAFETY INFORMATION
IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS01W - Safety informatio ReflectXion]
INFORMAZIONI DI SIC REZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS01W - Safety informatio ReflectXion]
INFORMATIONEN Z R SICHERHEIT
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS01W - Safety informatio ReflectXion]
INFORMACIONES DE SEG RIDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS01W - Safety informatio ReflectXion]
CONSIGNES DE SÉC RITÉ
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com/download
Réf. : [FIS01W - Safety informatio ReflectXion]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекомендует внимател но прочитат и сохранит инструкцию по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:
www.claypaky.com
Наименование: [FIS01W - Safety informatio ReflectXion]
1. SAFETY INFORMATION

3
REFLECTXION
1
90°
90°
90°
90°
UNLOCKED
LOCKED
PAN Mechanism Lock and Release (every 90°) - Fig. 2
TILT Mechanism Lock and Release (every 45°) - Fig. 3
2 3
Packing contents - Fig. 1
45° 45°
45°
45°
45°
45°
45°
2. NPACKING AND PREPARATION
2x 183102/805

4
REFLECTXION
4
Connecting and disconnecting power cable - Fig. 6
Control panel - Fig. 5
Installing the fixture - Fig. 4
The fixture can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: with the exception o when the ixture is positioned on the loor, the sa ety cable must be itted. (Cod. 105041/003 available on request).
This must be securely ixed to the support structure o the ixture and then connected to the ixing point at the centre o the base.
Main
Switch
PowerCon
True 1
IN
DMX
5 pin
IN
Ethernet
PowerCON
True 1
OUT
DMX
5 pin
THRU
Display Functional buttons
2
1
1
2
3
5
6
3. INSTALLATION AND START- P
3.1 Installing the fixture
3.2 Connecting to manis supply

5
REFLECTXION
Switching on the fixture - Fig. 9
Press the switch. The fixture starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware xxx (Fixture ID) System errors
REFLECTXION Version X.X.X Dmx Address xxx E: .........................
Date - Hour W: .........................
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the fixture menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the fixture’s DMX address.
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
Dmx Address
War ning Message
Fixture ID
9
Connecting to the control signal line (DMX) - Fig. 8
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last fixture with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
Connecting to the mains supply - Fig. 7
Connecting fixture to fixture - Fig. 7a
Mains
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
7
In/Out True1
Max 15 fixtures
Max 1600 VA
Mains
7a
8
Continue ➔
3.3 Connecting the control signal line: DMX / Art-Net
3.4 Switching on the fixture and basic Set p

REFLECTXION
6
28
28
Reversal of the display - Fig. 10
To activate this function, press UP
B
and DOWN
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
Setting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
Setting the projector Fixture ID
On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).
The Fixture ID address can be set with the projector switched off.
10
Functions of the buttons - sing the menu
Setting addresses and options with the fixture disconnected
The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
F
to momentarily activate the display and thus access the settings. Once the required operations have been carried out,
the display will switch off again after a wait time of 30 seconds.
SING THE MEN :
1) Press
F
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Informations (Informations Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functionning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Confirms the displayed value, or activates the displayed function, or enters the successive
menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level
Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.
F
C
DOWN
B
UP
D
LEFT
E
RIGHT

7
REFLECTXION
Periodical cleaning - Fig. 11.
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning the mirrors. It is recommended that the projector undergoes an annual service by a
qualified technician for special maintenance involving at least the following operations:
• General cleaning of internal parts.
• Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
• General visual check of the internal components, cabling, mechanical parts, etc.
• Electrical and functional checks; eventual repairs.
11
Continue ➔
4. MAINTENANCE
4.1 Periodical cleaning

Battery removal - Fig. 12.
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
5
4
12
6
3
4.2 Battery removal
8
REFLECTXION
12
Battery not replaceable. The following information are intended to remove the battery before disposal

9
REFLECTXION
294
(11.57")
600
(23.62")
391
(15.39")
???
(??.??")
388
(15.28")
466
(18.35")
388
(15.28")
5. SPECIFICATIONS
POWER SUPPLIES
AC power input Neutrik PowerCON True1 100-
240V, 50/60 Hz.
In/Out True1 (Max 15 fixtures)
INPUT POWER
100 VA @230Vac - 50Hz.
CHANNELS
6 control channels.
EFFECTS SECTION
• Pan & Tilt (continuous movement)
CONTROL AND PROGRAMMING
• Control signal USITT DMX 512.
• Display Graphic LCD backlit b/w Display.
• Display battery Long life self-charging buffer
battery.
• Pan/Tilt Resolution 16 bit.
• Ethernet Input.
IP RATING
IP 20 - Protected against the entry of solid bodies
larger than 12mm (0.47”)
No protection against the entry of liquids.
MOTORS
2 stepper motors, microprocessor controlled.
INPUTS
DMX 512, 5 pin In & Out connector / Art-Net.
ELECTRONICS
• Long life self-charging battery.
• Function reset via on-board menu.
• Function reset from the lighting desk.
• “AUTOTEST” function from menu.
• Electronic monitoring with status error reporting
and logging.
• DMX level monitoring on all channels.
• Internal data transmission diagnostics.
• Firmware upgrade with no power (CPU only).
• Firmware upload from another fixture (CPU
only).
• Firmware Upgrade via Web Server.
• Protocols/Functions: RDM, Web Server, ArtNet.
• Extremely reliable communication RS485 bus.
BODY
• Aluminum and steel structure with plastic
covers.
• Two side handles for transportation.
• Device locking PAN and TILT mechanisms for
transportation and maintenance.
• Optional safety chain.
MOVING BODY
• PAN range 540°.
• TILT range 360°.
WORKING POSITION
• Working in any position
• Optional safety chain.
• Hanging system: with fast-lock omega clamps
(1/4 turn) on the base.
SAFETY SPECIFICATIONS
• Max ambient temperature 40°C (104°F).
• Safety devices circuit breaker with thermal
protection.
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment
supplied at low voltage (LVD).
• 2014/30/EU - Electromagnetic Compatibility
(EMC).
• 2011/65/EU - Restriction of the use of certain
hazardous substances (RoHS).
• 2009/125/EC - EcoDesign requirements for
Energy-related Products (ErP).
ETL
This product is available, on demand, with cETLus
Listed Mark.
PACKAGING
Carton box + Polystyrene / Carton box + Foam
shell / Flight case + Foam shell (2 position)
WEIGHT
13.5 Kg (29.76 lbs).

10
REFLECTXION
THE FIXTURE WILL NOT SWITCH ON
PROBLEMS
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PRO ECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No mains supply.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Mirror broken
Dust or grease deposited.
Check the power supply voltage.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
6. CA SE AND SOL TION OF PROBLEMS

11
REFLECTXION

CLAYPAKY S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. [phone] - Fax [phone] - www.claypaky.it
IST01U/001 – EN - Rev. 0 01/2020