Cleanfix SW22 User manual

Cleanfix SW22 VDE
Wet& Dry Vacuum Cleaner

OPERATIG INSTRUCTIONS
These operatng instruccons provide you with all informrmon necessary for
correct, safe and prescribed usage and maintenance of the series DRY
VACUUM CLEANER. They must be kept where they are accessible to the
user at all tmes.
PRESCRIBED USAGE
This machine is designed for the professional cleaning according to these
operatng instrrucons.
Any other usage, in partcular, for the removal of types of dust which may
be dangerous to health, is prohibited.
WARNING NOTE
- For cleaning or servicing the cleaner or when replacing parts, the motor
should be switched o ffand the conneecng plug be withdrawn from the
socket.
- Care should be taken to ensure that the connectng cable is not damage by
being driven over, crushed, strained, etc.
- The connectng cable should be regularly checked for any signs of damage
or ageing.
- The machine must not be used if the connectng cable is not in a proper
conditon.
- For sucton of dry dust, check that the filter is in the vacuum cleaner, also
for draw up liquids care to take out the filter from the vacuum cleaner.
- Do not use foaming chemical.
- Do not clean the vacuum with a water pipe to avoid that water get
through the vacuum head.
UTILIZATION
1) First operaton before use
- Introduce the flex hoses in the hole of the machinee unl the click insert.
Look that the seal ring is on right positon.
- Put the accessory that you need on the hoses.

FAULT CAUSE REMEDY
MAINTENANCE AND CLEANING ATTENTION
Take out the plug before any maintenance operaton on the head of the
machine.
NORMAL OPERATION OF MAINTENANCE:
- Clean the vacuum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT
THAT IT IS DRY BEFORE TO
INSERT IN THE VACUUM AGAIN.
Filter, nozzle,
sucton hose
or extensios
tube blocked
Sucton slowly
decreases Check and clean
TROUBLE SHOOTING
Motor (sucon
turbine) does not
start
No electrical
power
Check fuse,cable,plug and
socket
Sucton
suddenly
decreases
The paper
filtre bag or
the tank is full
Switch off the cleaner and
empty
Filter
Dust ascapes Check filter sealing. Replace
incorrectly or
defectve
when cleaning filter
2) Transport
- To avoid damage during the transport by car or by truck, the vacuum
cleaner must be put inside his original package.MAINTENANCE AND
CLEANING ATTENTION
Take out the plug before any maintenance operaton on the head of the
machine.
NORMAL OPERATION OF MAINTENANCE:
- Clean the vacuum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT
THAT IT IS DRY BEFORE TO INSERT IN THE VACUUM AGAIN.

TYPE PR-D
Nominal Voltage :220 - 230 V AC
Nominal Frequency :50 / 60 Hz
Nominal Power :1400 W
Net Weght :11,25 kg
Sound Level :65 db
IPX4