User manual / Bedienungsanleitung
6 © clearaudio electronic GmbH, 2019-04
4. Modes of operation
4.1 Output/o mode
The output/o mode is characterized by:
1. The output is deactivated.
2. The screen is dimmed and shows:
3. The LED ring of the button is o.
Note: In this mode, if the battery is discharged, the unit will start charging the battery automatically.
4.2 Battery output mode
The battery output mode is characterized by:
1. The output is activated.
2. The screen is dimmed (if the unit is not operated for more than 30 seconds) and shows:
3. The LED ring is constantly on (not ashing).
4.3 Charging mode
The charging mode is characterized by:
1. The output is activated.
2. The screen is dimmed (if the unit is not operated for 30 seconds) and shows:
3. The LED ring of the button is ashing.
If the unit becomes completely discharged,
smart power 24V
will automatically switch to charging
mode.
To manually start the charging or top-up process, go to “START Charging?” or “Top-up battery”
screen and conrm with along press (5+ seconds). The display conrms the activated charging
mode and then changes back to the status information. Depending on the remaining charge of the
integrated NiMh batteries, the charging time may vary.
When the battery is fully charged, the charging mode will switch o automatically.
clearaudio
loving music
|||| |||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| |||| |||| |||| ||||
0% 89% 100%
Charging Active
|||| |||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| |||| |||| |||| ||||
0% 89% 100%
