Clearaudio double matrix professional SONIC User manual

User manual
Bedienungsanleitung
© clearaudio
electronic GmbH, 2018/05 Made in Germany
double matrix professional SONIC

Page / Seite 2 © clearaudio electronic GmbH, 2018/05
User manual ........................................................ 3 - 14
Bedienungsanleitung .......................................... 15 - 27
Dear Clearaudio customer,
Congratulations on the purchase of your
double matrix professional SONIC , a high-performance
product made by Clearaudio.
Keeping your vinyl records scrupulously clean improves their sound quality. It is equally important
to clean new vinyl records, because the pressing process often leaves behind surface residues. The
integrated sonic cleaning technology of the Clearaudio double matrix professional SONIC will ef-
fectively remove all such contaminants from the grooves of your records.
Please read these instructions carefully to ensure correct operation and to achieve the
best possible cleaning results.
Components and processing
The Clearaudio
double matrix professional SONIC is built using the highest quality components
and is designed for intensive and continuous use. The chassis, cleaning, vacuum and antistatic
arms, as well as the Seal record clamp are machined from solid aluminium. The chassis is lined with
acoustic damping pads to keep operational noise to a minimum.
Our quality standard is reected in a warranty of 3 years, provided that the completed warranty card
is returned to us within 14 days of purchase.
We thank you for your purchase and hope you enjoy using your new double matrix professional
SONIC.
Available Accessories:
Dustcover for double matrix professional
SONIC (AC143)
Pure Groove Cleaning Fluid
(AC048)
Available in dierent sizes.
Replacement microber strips for
double matrix professional SONIC
(AC062/DMPS)
User manual / Bedienungsanleitung

Made in Germany Page / Seite 3
Contents
1. Package contents ................................................................... 4
2. Features overview of the
double matrix professional SONIC ......................................... 5
3. Setup of the double matrix professional SONIC .................... 6
4. Operating elements ................................................................ 7
5. Functions ................................................................................ 8
6. Initial start-up ........................................................................ 9
7. Maintenance ........................................................................... 10
8. Points to note ......................................................................... 11 - 12
9. Service .................................................................................... 12
10. Technical data ...................................................................... 13
Warranty information ................................................................ 26 - 33
User manual / Bedienungsanleitung

Page / Seite 4 © clearaudio electronic GmbH, 2018/05
1. Package contents
The Clearaudio double matrix professional SONIC is delivered in bespoke packaging designed
specically for the product.
Ensure that the packaging has no external damage, such as shipping damage.
Please retain the packaging, as only the original packaging provides the necessary protection and
stability during any subsequent transportation.
Please check the contents of you’re newly purchased
double matrix professional SONIC record cleaning machine for completeness:
1. Fully assembled record cleaning machine
2. Seal record clamp
3. Filling funnel
4. IEC connector
(according to country specications)
5. 6 pcs. spare microber stripes
6. 250 ml Pure Groove cleaning uid
7. Cap for cleaning uid reservoir
(mounted on the lling opening)
8. Tube plug
(mounted on the drain tube)
9. Single adapter
10. Hex wrench #5
11. Warranty card
12. Quality control card
In the event of an incomplete delivery, please contact the relevant Clearaudio dealer
immediately.
User manual / Bedienungsanleitung

Made in Germany Page / Seite 5
2. Features overview of the double matrix professional SONIC
• Integrated sonic – vibrating cleaning elements
Deep cleaning of pressing residues and persistent dirt deep within the record groove
• Cleans LPs, EPs and singles
•
Simultaneous cleaning of both sides
Ecient and eective cleaning of both sides of a record in a single washing program.
• Manual operation
Set your own cleaning parameters.
•
Bi-directional rotation
For enhanced cleaning performance you can change the direction of the rotation
•
Variable speed regulation
During manual operation, select the desired speed to receive the best cleaning result.
• LED level indication
Shows the uid level in the internal cleaning uid reservoir.
•
Adaptive cleaning brush
The cleaning brushes automatically adjust for dierent thickness and sizes of record.
• Seal record clamp
Ensures that the record is held rmly during the cleaning process and protects the record label
from uid damage.
• Auto mode
A fully automated cleaning program suitable for most record cleaning situations.
• Super clean mode
A fully automated cleaning program for records that need an extra thorough clean.
• ECO mode
A shortened cleaning program.
User manual / Bedienungsanleitung

Page / Seite 6 © clearaudio electronic GmbH, 2018/05
3. Setup of the double matrix professional SONIC
Take the already assembled double matrix professional SONIC record cleaning machine from its
packaging. Set it on a stable and horizontal surface (such as a desk or rack).
Please note that due to the weight of the record cleaning machine, the feet of the device can cause
marks on soft surfaces. Due to the warm air outlet on the bottom of the double matrix professional
SONIC , the surface on which it rests should be heat resistant to a minimum of 60°C.
3.1 Connect to the mains supply
To avoid using an additional extension cable, place the double matrix professional SONIC within 2
metres of an electrical wall outlet.
Connect the supplied mains cable rst to the IEC socket on the back of the
double matrix professi-
onal SONIC
, and then to the electrical wall outlet. Press the switch on the IEC socket and position
it to “I”.
Using the funnel supplied, ll the cleaning uid reservoir with cleaning uid. Pay careful attention to
the uid level LED indicator to avoid over-lling. For best results we recommend using Clearaudio
Pure Groove cleaning uid. Close the cleaning uid reservoir with the cap.
Now the
double matrix professional SONIC is ready for use. Please read the whole user manual
before cleaning your rst record.
Note: Voltages are referenced to EU countries with 230V mains power.
In other countries the mains voltage and frequency may vary (e.g. USA 115V/60Hz.)
The correct operating voltage can be found on the back of the device on the product
information label (Fig. 1).
The mains cable supplied should be of the type appropriate for your country. Please ensure that the
mains voltage of your country also matches the mains voltage of the device. This information is also
on the product information label (see above). If it does not match, contact your Clearaudio dealer.
Pic. 1: Product information label on the back
User manual / Bedienungsanleitung

Made in Germany Page / Seite 7
4. Operating elements
Please familiarise yourself with each of the operating elements shown above, which are described
in detail on the following pages.
1
8
7
65
4
32
10 9
13
12
11
14
1Automatic / Superclean start / ECO mode 8Antistatic arm
2Manual platter rotation on & o /
Automatic o 9IEC socket with power switch
3Cleaning uid application 10 Drain tube with sealing plug
4Rotational direction selection 11 Cleaning uid reservoir lling cap
5Rotational speed adjust 12 Cleaning uid reservoir level indication
LEDs
6Vacuum drying on / o 13 Cleaning & vacuum arm
7
Seal record clamp 14 Removeable microber stripes
Pic. 2: View from above
User manual / Bedienungsanleitung

Page / Seite 8 © clearaudio electronic GmbH, 2018/05
5. Functions
5.1 Automatic cleaning
• Automatic / Superclean / Eco mode
The “Auto” button has a multifunction. Pressing it once gives “Automatic mode”. Pressing it
twice in quick succession starts the “Superclean mode”, indicated by slow ashing of the blue
LED ring that surrounds the button. The third program is the ECO mode. If you hold the
button “Auto” for three seconds, you will start this program (indicated through the fast
ashing ring of the button “Auto”).
If the respective cleaning program (Auto mode / Super Clean / ECO mode) is nished, the
blue ring of the button will ash short and constant. You can cancel every automatic mode
by pressing the button “Power” shortly.
5.2 Manual cleaning
• Power
Starts the platter rotating and switches on the sonic cleaning function.
• Liquid
Press to apply cleaning uid to the upper and lower sides of the record.
• Platter
Press to change the platter’s rotational direction.
• Platter Speed
Turn to adjust the platter rotation speed.
• Vacuum
Activates the suction drying process while also stopping the sonic cleaning function.
5.3 Automatic and manual cleaning
• Antistatic brush
The antistatic brush arm is used to discharge any static
that is generated during the drying process.
After completion of the automatic programs or manual
cleaning, the dry record should pass the antistatic brush
at least for 2-3 full rotations. Turn the antistatic arm
above the record to the outer point. The record will start
to turn and the constructed static will derived.
The antistatic function can only be activated with opened
suction arm.
After 2-3 full rotations, turn the antistatic arm back to the start position. The rotation of the record
ends automatically.
• LED level indicator
Shows the level of cleaning uid currently in the reservoir (0% to 100%).
Pic. 3: Turning the antistaic unit
User manual / Bedienungsanleitung

Made in Germany Page / Seite 9
6. Initial start-up
Filling the cleaning uid reservoir
Place the funnel supplied into the lling hole (Pic. 2, No. 11, page 7) and ll the uid reservoir with
the
Pure Groove cleaning uid provided (max. 0.4 l).
Pay attention to the LED level indicator so as not to over-ll. For eective cleaning we recommend
using only Clearaudio Pure Groove cleaning uid (available at www.analogshop.de).
Opening the cleaning and vacuum arm and placing the record
Lift the upper cleaning arm and swing it to the left to open the cleaning and vacuum assembly.
Turn the knob of the Seal record clamp anticlockwise to release the clamp then place the record to
be cleaned on the label-sized platter. Now put the
Seal record clamp back on the spindle and press
down gently while rotating the knob clockwise to secure the record in position and create a seal to
protect the record label from uid damage.
Closing the cleaning and vacuum unit
Now you can swing the upper cleaning arm to the right to close the cleaning and vacuum assembly.
Automatic cleaning
The new features of the double matrix professional SONIC “Auto”, “Superclean” and “ECO mode”
provide fully automatic and ecient cleaning (see function 5.1, page 8). You only have to manually
activate the antistatic brush.
Manual cleaning
To set your own parameters for the cleaning process manually:
- After you have placed and xed the record with the Seal record clamp, close the cleaning and
vacuum assembly.
- Press the “Power” button to start the sonic cleaning function and rotation of the record.
- Press the “Liquid” button to apply cleaning uid to the record. Holding down the button for
longer applies more uid. Adjust this according to the desired quantity of cleaning uid.
- After about 3 or 4 rotations, change the platter direction by pressing the “Platter” button.
We recommend 3 or 4 turns in each direction. By turning the “Platter Speed” knob you can
vary the rotational speed to further ne tune the cleaning process.
- Once you are happy with the cleaning, press the “Vacuum” button. This will stop the sonic
cleaning function and start the vacuum drying process. After about 3 or 4 rotations, when the
record is visibly dry, switch o the suction by pressing the “Vacuum” button again.
- Press the “Power” button to stop the record rotation.
- Open the suction arm. Now start the antistatic function (see 5.3, page 21). After completion
of the antistatic function the manual cleaning is complete and you can remove your record.
User manual / Bedienungsanleitung

Page / Seite 10 © clearaudio electronic GmbH, 2018/05
7. Maintenance
Changing the microfiber stripes
To change the microfiber stripes, remove the upper arm
of the cleaning and vacuum assembly by loosening the
side-mounted hex screw, then pulling the upper arm gently
upwards.
Next, release the microfiber supporters from the upper
and lower cleaning arms by applying a light pressure at
the end of each microfiber supporter, and then remove
them (see Fig. 4).
Now peel the old microfiber strips away from their
supporters. Before attaching new microfiber strips, it is
important to ensure that any grease, dust or residual
glue from the old microfiber strips is removed from the
microfiber supporter.
Apply new microfiber strips, firmly pressing them onto the supporters.
We recommend changing the microber strips after approx. 100 cleaning programs, though this will
depend on the condition of the records cleaned.
Cleaning and draining the waste uid tank
Over time it is possible for residue to settle in the waste uid tank which could potentially block the
drain tube. To avoid this happening you should periodically clean the waste uid tank.
1. Remove the upper suction arm after loosening the side-mounted screw with the delivered
hex wrench (#5) and pulling it gently and steadily upwards.
2. Place the lling funnel into the suction tube.
3. To ush the waste tank, we recommend 250 ml warm water, which you pour in the waste
tank.
4. Let the warm water sit in the waste tank for approximately 20 minutes, then drain it by re
moving the sealing plug from the drain hose and put the end of the drain hose into a bowl
(etc.) which is positioned deeper. Repeat this process until the drained ushing water is clean
and does not contain any reside.
After the cleaning, you can remount the suction arm. Please make sure to insert the arm
straight and without any pressure. Otherwise the arm may tilt and damage the machine.
Please note:
If you take the machine into operation again, the drain tube must always be closed by
the stopper, so that the vacuum pump can generate the required vacuum for suction.
Only through this we can guarantee a lasting and full function of your cleaning machine.
The drain tube at the rear should not be pusehd back into the machine. This could bend
the tube and the leaking uid could damage the cleaning machine.
Pic. 4: Lift the microber supporter by
pressing down on one end.
User manual / Bedienungsanleitung

Made in Germany Page / Seite 11
8. Points to note
Waste uid tank:
The waste uid tank has a capacity of approx. 0.5 litres. We recommend regular draining of the
tank, to avoid any damage. Please note that with intensive use waste uid can evaporate completely
leaving residue within the waste tank.
To empty the waste uid tank:
1. On the back panel you will nd the drain tube, which can be pulled out (see Pic. 2, No. 10,
page 7).
2. Remove the sealing plug from the drain tube.
3. To empty the waste uid tank completely, tilt the double matrix professional SONIC about
45° to the rear. Once emptied, be sure to reseal the drain tube again.
CAUTION:
Do not re-use waste cleaning uid. This could damage your machine.
Cleaning the uid reservoir:
The cleaning uid reservoir has a capacity of approx. 0.4 litres. We recommend that you ll the
tank only with Clearaudio Pure Groove cleaning uid (available at www.analogshop.de) to recei-
ve the best cleaning results.
CAUTION:
Never use foaming or corrosive liquids, or water. This could cause serious damage to your
machine and may void your warranty.
LED level indicator:
When the last LED (0%) of the level indicator is ashing (Pic. 2 No. 12, page 7), the functions “Auto”,
“Superclean” and in manual mode, the function “Liquid”, will be deactivated. This protects the liquid
pump from damage. To re-activate these functions, ll the cleaning uid reservoir with more Pure
Groove cleaning uid.
CAUTION:
Ensure that the double matrix professional SONIC is switched on when lling the cleaning uid re-
servoir so that you can read the current level on the LED level indicator.
Pic. 5: Warning
User manual / Bedienungsanleitung

Page / Seite 12 © clearaudio electronic GmbH, 2018/05
Auto protect:
If the cleaning and vacuum assembly is open (Fig. 2, No. 13, page 7), all functions of the buttons
are deactivated. The antistatic arm can still cause the rotation of the platter axis when turned to the
middle.
Please note:
If you won’t be using the double matrix professional SONIC for more than a week, we suggest that
you drain the remaining uid from the cleaning uid reservoir. For this pull both hoses from the vac-
cuum unit, and passthem in a bowl (etc.) and press the bottom „Liquid“.
Important:
After use, the
double matrix professional SONIC should always turned o by pressing
the switch on the IEC socket to the position “0”.
If you won‘t be using the unit for more than a week, we recommend to unplug the
cleaning machine.
9. Service
The standard warranty period for the double matrix professional SONIC is two (2) years.
By returning your completed warranty card to Clearaudio within two weeks of purchase, you can
benet from an extended warranty period of three (3) years.
The double matrix professional SONIC should only be repaired by the manufacturer during the war-
ranty period, otherwise the warranty will expire.
Regular visual inspection of a possibly defective insulation of the cable is also advisable for your own
safety. A damaged mains lead should be replaced immediately by an expert.
Servicing for all Clearaudio products must be done via your dealer.
To transport the Clearaudio double matrix professional SONIC , always use the original packaging
and be sure to pack the unit exactly as it was delivered, by following the reverse of the procedure
described in setup of the double matrix professional SONIC .
Disclaimer
Clearaudio assumes no liability for damage caused to records resulting from incorrect product
handling.
User manual / Bedienungsanleitung

Made in Germany Page / Seite 13
10. Technical data
Construction principle: – Left and right turning
– Cleaning of both sides
– Vacuum engine with overheat sensor
– Integrated antistatic brushes device for discharge of static
charge
– Automatic uid application
– Sonic Option - gentle and high ecient cleaning through
vibration
– Automatic cleaning process with only one button
– As an option: cleaning of each cleaning step by hand control
Power consumption: Max. consumption: 450 watts
O mode: 0 Watt (by switching o at the rear of the machine)
Weight: approx. 16kg
Dimensions W/D/H
in inches: approx. 16.14 x 15.16 x 10.87 (incl. Record clamp) approx. 16.14. x 15.16 x 11.42 (with Acrylic Dustcover)
Dimensions W/D/H in mm: approx. 410 x 385 x 276 (incl. Record clamp)
approx. 410 x 385 x 290 (with Acrylic Dustcover)
Manufacturers
guarantee*: 3 years*
Accessories (not included): Dustcover (Art. No. AC143)
Pure Groove cleaning uid (Art. No. AC048)
Microbre stripes (Art. No. AC62/DMPS)
Available at www.analogshop.de
* Provided that the warranty card is correctly completed and returned to Clearaudio within 14 days of purchase.
Notice:
The device is intended for use in dry, heated rooms.
Never touch the mains cable with wet hands.
If the record cleaning machine is connected to the socket and/or lled with uid, do not tilt the machine.
The Clearaudio double matrix professional SONIC is fully compliant with European laws concer-
ning electromagnetic compatibility (Electromagnetic Compatibility Regulations 2006).
Clearaudio electronic is not responsible for typographical errors in descriptions.
Technical specications subject to change or improvement without prior notice.
Product availability is as long as stock lasts.
Copies and reprints of this documents, including extracts, require written consent from
Clearaudio electronic GmbH; Germany
User manual / Bedienungsanleitung

Page / Seite 14 © clearaudio electronic GmbH, 2018/05
Sehr geehrte clearaudio - Kundin, sehr geehrter clearaudio - Kunde,
Sie haben sich für eine clearaudio
double matrix professional SONIC Schallplattenwaschmaschine
entschieden – ein High-End Produkt der clearaudio electronic GmbH – wir beglückwünschen Sie
dazu.
Das Reinigen von verschmutzten Schallplatten führt zu einer deutlichen Klangverbesserung; dies
gilt übrigens auch für neue Schallplatten, da bei der Pressung häug Verunreinigungen und Rück-
stände des Trennmittels zwischen Matrize und Vinyl in den Rillen haften bleiben. Mit der integrierten
Schallreinigungstechnologie der clearaudio double matrix professional SONIC lassen sich diese
Verunreinigungen rillentief entfernen.
Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, um Fehlbedienungen zu
vermeiden und ein optimales Reinigungsergebnis zu erzielen.
Verwendete Bauteile und Verarbeitung
Bei der clearaudio double matrix professional SONIC verwenden wir ausschließlich hochwertigste
Bauteile, die nahezu unverwüstlich sind. Alle gewählten Komponenten sind für eine intensive und
dauerhafte Nutzung ausgelegt. Die Schalldämmmatten im Innern der Plattenwaschmaschine redu-
zieren die Geräuschentwicklung auf ein angenehmes Minimum.
Sowohl die Absaug- und Antistatikarme als auch die Seal –Plattenklemme sind aus massivem Alu-
minium hergestellt. Unser Qualitätsanspruch drückt sich in einer Garantieleistung von 3 Jahren aus,
wenn uns die ausgefüllte Garantiekarte innerhalb von 14 Tagen nach Kauf eingeschickt wird.
Wir bedanken uns für Ihren Kauf und für das in uns gesetzte Vertrauen und wünschen Ihnen viel
Spaß mit Ihrer neuen
double matrix professional SONIC .
Mögliches Zubehör:
Abdeckhaube für double matrix professional
SONIC
(AC143)
Pure Groove Reinigungsüssig-
keit (AC048)
In verschiedenen Größen
verfügbar
Mikrofaser-Ersatzstreifen für
double matrix professional SONIC
(AC062/DMPS)
User manual / Bedienungsanleitung

Made in Germany Page / Seite 15
User manual / Bedienungsanleitung
Inhaltsverzeichnis
1. Lieferumfang ................................................................................... 16
2. Eigenschaften der double matrix professional SONIC .................... 17
3. Aufstellen und Anschließen double matrix professional SONIC ..... 18
4. Bedienelemente .............................................................................. 19
5. Funktionen ....................................................................................... 20
6. Erstinbetriebnahme ......................................................................... 21
7. Instandhaltung ................................................................................ 22
8. Wichtiges und Wissenswertes ........................................................ 23 - 24
9. Service ............................................................................................. 24
10. Technische Daten .......................................................................... 25
Garantieinformationen ........................................................................ 26 - 27

Page / Seite 16 © clearaudio electronic GmbH, 2018/05
1. Lieferumfang
Die clearaudio double matrix professional SONIC verlässt unsere Fertigung in einer besonders si-
cheren und auf das Produkt abgestimmten Verpackung.
Überzeugen Sie sich davon, dass keine äußeren Beschädigungen vorliegen, insbesondere keine
Transportschäden.
Heben Sie die Verpackung auf, damit diese für eventuell spätere Transporte zur Verfügung steht.
Nur die Original – Verpackung bietet den notwendigen Schutz und die Stabilität beim Transport.
Bitte kontrollieren Sie den Lieferumfang Ihrer neu erworbenen
double matrix professional SONIC Schallplattenwaschmaschine auf deren
Vollständigkeit:
1. Komplett montierte Schallplatten-
waschmaschine
2. Seal - Plattenklemme
3. Einfülltrichter
4. Kaltgerätestecker
(Abweichungen je nach Länderspezikation)
5. Ersatz – Mikrofaserbezüge 6 Stück
6. Pure Groove Reinigungsüssigkeit 250 ml
7. Verschlussdeckel für Vorratsbehälter
(auf Einfüllönung angebracht)
8. Schlauchstopfen
(am Ablassschlauch angebracht)
9. Singleadapter
10. Innensechskantschlüssel #5
11. Garantiekarte
12. Qualitätskarte
Im Falle einer unvollständigen Lieferung wenden Sie sich bitte umgehend an ihren
clearaudio Fachhändler, bei dem Sie das Produkt erworben haben.
User manual / Bedienungsanleitung

Made in Germany Page / Seite 17
User manual / Bedienungsanleitung
2. Eigenschaften der
double matrix professional SONIC im Überblick
• Integrierte Sonic – Vibrierende Reinigungselemente
Rillentiefe Reinigungswirkung bei evtl. Pressrückständen oder hartnäckigen
Verschmutzungen.
• Reinigung von LPs, EPs und Singles
• Gleichzeitige Reinigung beider Seiten
Eziente und gründliche Reinigung beider Seiten in einem Waschgang.
• Manuelle Bedienung
Hier können Sie die Reinigungsphasen selbst denieren.
• Links- / Rechtslauf
Wechsel der Drehrichtung
• Stufenlose Drehzahlregulierung
Drehzahl bei manueller Bedienung wählbar um gründlichere Ergebnisse zu erzielen.
• LED – Füllstandanzeige
Informiert über den aktuellen Flüssigkeitsstand des Vorratsbehälters.
• Adaptive Absaugbürsten
Leicht zu wechselnde Reinigungselemente passen sich der Oberäche der Schallplatte an.
• Seal – Plattenklemme
Sorgt für sicheren Halt der Schallplatte.
• Auto Mode
Im Auto Mode läuft ein vollautomatisches Reinigungsprogramm ab.
• Super Clean Mode
Ein vollautomatisiertes Reinigungsprogramm für sehr stark verschmutze Schallplatten.
• ECO Mode
Ein verkürztes Reinigungsprogramm.

Page / Seite 18 © clearaudio electronic GmbH, 2018/05
3. Aufstellen und Anschließen der double matrix professional SONIC
Nehmen Sie die bereits fertig montierte Plattenwaschmaschine aus der Verpackung. Stellen Sie die
double matrix professional SONIC auf eine robuste und waagerechte Unterlage (z.B. Tisch, Rack…).
Beachten Sie jedoch, dass die Füße des Gerätes aufgrund des hohen Gewichtes, auf weichen Ma-
terialien Abdrücke verursachen können. Aufgrund des Warmluftaustrittes auf der Unterseite der
double matrix professional SONIC muss der Untergrund bis mind. 60°C hitzebeständig sein.
3.1 Mit dem Stromnetz verbinden
In maximal 2 Meter Entfernung sollte sich eine geerdete Steckdose benden, um auf den Einsatz
einer zusätzlichen Verlängerungsleitung verzichten zu können. Verbinden Sie nun die beigelegte An-
schlussleitung zunächst mit der Kaltgerätebuchse auf der Rückseite Ihrer
double matrix professional
SONIC und anschließend mit dieser Steckdose.
Betätigen Sie den Schalter an der Kaltgerätebuchse und stellen Sie diesen auf Stufe „I“.
Füllen Sie Ihre Pure Groove Reinigungsüssigkeit in den dafür vorgesehenen Vorratsbehälter und
beachten dabei die LED-Füllstandanzeige. Anschließend verschließen Sie den Vorratsbehälter mit
der Verschlusskappe.
Nun ist die double matrix professional SONIC betriebsbereit. Lesen Sie bitte die Anleitung weiter um
mit der Reinigung der ersten Schallplatte zu beginnen.
Achtung:
Die Spannungsangaben beziehen sich auf EU-Länder mit Schuko Stecker im 230V Netz.
In anderen Ländern können die Spannungsangaben und / oder / sowie die Anschluss-
leitungsart variieren
z.B. USA 115V /60Hz. Die korrekte Betriebsspannung können Sie dem Typenschild (Abb.
1) auf der Rückseite des Gerätes entnehmen.
Entsprechend Ihrer landesspezischen Netzspannung wurde eine passende Anschlussleitung beige-
legt. In jedem Falle aber sollten Sie unbedingt darauf achten, dass die angegebene Netzspannung
mit der Ihres standortes übereinstimmt und die richtige Anschlussleitung verwendet wird. Ist dies
nicht der Fall, so wenden Sie sich bitte an Ihren clearaudio Fachhändler.
Abb. 1: Typenschild auf der Rückseite
User manual / Bedienungsanleitung

Made in Germany Page / Seite 19
User manual / Bedienungsanleitung
4. Bedienelemente
Bitte machen Sie sich mit allen hier abgebildeten Bedienelementen vertraut.
Auf den folgenden Seiten der Bedienungsanleitung werden die einzelnen Bedienelemente und
Baugruppen näher erläutert.
1
8
7
65
4
32
10 9
13
12
11
14
1Auto- / Superclean / ECO-Mode 8Antistatik-Einheit
2Power / Manueller Betrieb / Automatik
Aus 9Kaltgerätebuchse mit Netzschalter
3Liquid / Manueller Flüssigkeitsauftrag 10 Ablassschlauch mit Verschlussstopfen
4Platter / Änderung Drehrichtung 11 Vorratsbehälter Einfüllönung mit
Verschlusskappe
5Platter Speed / Drehgeschwindigkeit 12 LED-Füllstandsanzeige
6Vacuum / Absaugung 13 Reinigungs- / Absaugeinheit
7
Seal Plattenklemme 14 Herausnehmbare Mikrofaserträger
Abb. 2: Ansicht von oben

Page / Seite 20 © clearaudio electronic GmbH, 2018/05
5. Funktionen
5.1 Automatische Reinigung
• Automatic / Superclean / ECO- mode
Der Taster „Auto“ hat eine Mehrfachfunktion. Durch einmaliges Betätigen gelangen Sie in den
Automatik-Modus. Durch zweimaliges Betätigen, starten Sie den Super-Clean-Modus
(Erkennbar durch ein langsames Blinken des blau umrandeten Tasters). Das dritte Programm
ist der Eco-Mode. Wenn Sie den Taster „Auto“ für 3 Sekunden halten, starten sie diesen
(Erkennbar an der schnell blinkenden Umrandung des Tasters „Auto“). Wenn der jeweilige
Reinigungsprozess (Auto-Mode / Super-Clean / Eco-Mode) beendet ist,blinkt der blau
umrandete Taster kurz und gleichmäßig. Sie können jeden Automatik-Modus abbrechen,
indem Sie den Taster „Power“ kurz drücken.
5.2 Manuelle Reinigung
• Power
Versetzt den Plattenteller in Rotation und startet die Sonic Funktion.
• Liquid
Durch Betätigen des Tasters „Liquid“ wird Reinigungsüssigkeit gleichzeitig auf die Ober-
und Unterseite der Schallplatte aufgetragen..
• Platter
Durch Betätigen des Tasters „Platter“ bewirken Sie einen Wechsel der Drehrichtung.
• Platter Speed
Mit dem Bedienelement „Platter Speed“ können Sie die Drehgeschwindigkeit stufenlos
regulieren.
• Vacuum
Der Taster „Vacuum“ löst die Absaugung aus. Durch
betätigen des Tasters „Vacuum“ wird die Sonic-Funktion
automatisch deaktiviert.
5.3 Automatische und manuelle Reinigung
• Antistatikbürste
Die Antistatik-Bürsteneinheit dient zur Ableitung elektro-
statischer Auadungen, die während des Reinigungs-
vorganges entstehen. Daher sollte die trockene Schall-
platte, nach Beendigung der Automatik-Programme bzw.
der manuellen Reinigung, die Antistatikbürste für mind.
2-3 volle Umdrehungen durchlaufen. Schwenken Sie
nun den Antistatikarm zur Schallplattenmitte bis sich
der Tellermotor einschaltet. Die Schallplatte beginnt sich zu drehen und die aufgebaute
Statik wird abgeleitet.
Pic. 3: Turning the antistaic unit
User manual / Bedienungsanleitung