Clearaudio Ovation User manual

User manual
© clearaudio electronic GmbH, 2018/05 Made in Germany
Ovation
Black with black chassis
Silver with natural wood chassis

User manual
2 © clearaudio electronic GmbH, 2018/05
Dear Clearaudio customer,
You have purchased a State-Of-The-Art turntable, the Ovation , a world class product of Clearaudio
electronic GmbH. Congratulations on your purchase!
With the Ovation turntable, Clearaudio made use of the OSC (Optical-Speed-Control) technology
found in the
Innovation turntables series by implanting it into a precision milled Panzerholz (bullet
proof wood) chassis. This chassis is combined with an anti-resonance mat that is capable of
absorbing a huge amount of energy. This is due to the use of more than 100,000 small stainless
steel balls which absorb unwanted resonance.
Thus, the turntable combines the latest technology and innovation in a classic design, at a perfect
price/performance ratio.
Please read this user manual carefully so that you can enjoy all the advantages of your
Ovation
turntable. All information given will help to generate the best performance and avoid any possible
damages.
We hope you will enjoy your new Clearaudio
Ovation turntable.
Clearaudio electronic GmbH
Please read the warnings before connecting your
Ovation turntable to the mains supply.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
- Copyright Act 1956,
- Dramatic and Musical Performers Act 1958,
- Performers Protection Acts 1963 and 1972,
- Any more recent legal regulations.
The Clearaudio Ovation meets the regulations concerning electromagnetic disturbance (EMC)
and low-voltage appliances.

User manual
Made in Germany 3
Contents
1. Packaging overview ............................................ 4
2. Setup and operation ............................................ 5 - 12
3. Special notes ....................................................... 13
4. Technical data ..................................................... 14
Warranty information .............................................15 - 16

User manual
4 © clearaudio electronic GmbH, 2018/05
1. Packaging overview
The Clearaudio Ovation turntable is delivered in specially designed custom packaging.
Please check the contents according to the following list before you set up your new Clearaudio
Ovation turntable.
Pic. 1: Packaging overview
1. Layer (top):
Top of bearing, belt,
ttings and accessories
(Quality and warranty card,
bearing oil)
If ordered as set:
tonearm and/or cartridge
2. Layer (middle):
Turntable chassis
3. Layer (bottom):
Platter,
aluminum sub-platter
IMPORTANT NOTICE:
Please double check the tightness of all bolts and armboard mounting hardware, as temperature
uctuations during transit may have caused the hardware to become loose.

User manual
Made in Germany 5
2. Setup and operation
The Ovation turntable consists of several components, as described in No 1 (Packaging overview).
The setup is easy, as some of the components are pre-assembled at the factory.
Please make use of the white gloves enclosed in order to avoid scratches or unwanted ngerprints
(e.g. on the platter).
Please follow the instructions step by step:
The
Ovation requires a space of at least 16.54 inch x 13.78 inch for positioning.
16.54 inch
/ 420 mm
13.78 inch / 350 mm
Pic. 2: Setup space

User manual
6 © clearaudio electronic GmbH, 2018/05
2.1
Place the pre-mounted chassis on your hi-rack or another suitable surface.
Pic. 3: Placing the Ovation on the Flat Pads
2.2
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided
ground cable into the hole of the screw from the bearing at the bottom side of the turntable and
connect the other end with your amplier.
Pic. 4: Grounding the bearing of the Ovation
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil (Art. No. AC068 available through www.analogshop.de), on the ceramic bearing shaft.
Slip the bearing top onto the bearing shaft of the turntable.
Pic. 5: Bearing oil

User manual
Made in Germany 7
2.4
Now you can set the bearing upper part carefully onto the bearing.
To avoid damages make sure you slide the bearing upper part slowly and carefully on the polished
ceramic shaft.
Pic. 6: Fitting the bearing upper part
2.5
Now you can set the sub-platter carefully onto the bearing.
First remove the security mat on the backside of the sub-platter (security tape for OSC - graduated
collar (Optical Speed Control)).
To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing.
After that, take the included belt and place it around the motor and the sub-platter.
At this point the sub-platter will be higher than the pulley. This is normal, as the CMB requires the
weight of the platter to fully engage it.
Pic. 7: Setting the sub-platter Pic. 7.1: Placing the belt

User manual
8 © clearaudio electronic GmbH, 2018/05
2.6
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
Pic. 8: Setting the platter onto the bearing
2.7
Please check with the bubble level gauge, if your Ovation
turntable is in a level position.
You can adjust each of the turntable’s feet to get the turntable
level. Only if the turntable is in a level position will you get the
best results with your turntable.
Adjust the height be turning the threaded spike feet.
When the table is properly level, lock the feet in place with the
nut (see below).
Please note:
Through turning the feets clockwise you will raise the
turntable,by turning counter clockwise the turntable will lower.
Pic. 9: Adjustment of level
Pic. 9.1: Adjustment of the height

User manual
Made in Germany 9
2.8
For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.
Now you can connect the Ovation turntable with the main supply.
Position of the screw
to fasten the
tonearm with 2mm
allen key
Boring for the
tonearm feet
1. Insert carefully rst the cable and then the tonearm feet through the hole of the tonearm
base.
2. Now adjust the tonearm height.
3. At the end secure the tonearm with the screws with are already integrated at the front of the
mounting base.
4. For tonearm and cartridge mounting please refer to the user manual of the respective
manufacturer.
Pic. 10: Rear view Clarify tonearm

User manual
10 © clearaudio electronic GmbH, 2018/05
If you purchased the Clearaudio Ovation as package with tonearm and cartridge, you received also
a Smart Stlyus Gauge as accessories, which allows you to adjust the tracking force of the cartridge.
Pic. 11: Use of the Smart Stylus Gauge
✓

tracking force too high!

tracking force too low!
This position of the diamond
correlates to a tracking force of
20 mN (2.0g).