ClearCube I8800 Service manual

ClearCube Public Technical Document
Document Code: TB0162JS
Topic:
Component(s) Affected:
Date:
Cumulative List of Updates for I8800 I/Ports
I8800 I/Ports, XPe
September 1, 2005
TB0162 rev 9/01/2005
ClearCube Technology 8834 Capital of Texas Hwy N Austin, Texas 78759 voice 512 652 3500 www.clearcube.com
TB0162.fm — Cumulative List of Updates for I8800 I/Ports
OVERVIEW / ENVIRONMENT
ClearCube has developed a number of update files for I8800 I/Ports running the XPe operating system.
This Technical Bulletin lists those updates and provides general installation instructions. Users can down-
load these updates from the ClearCube support website at http://support.clearcube.com/.
DETAILED DESCRIPTION
The Technical Bulletin listed for each update provides more detailed information on the update and its
installation. For a summary of Microsoft security updates for I8800 I/Ports, please see Technical Bulletin
TB0096, Summary of I8800 I/Port Security Updates.
Note:
These updates apply to the I8800 I/Port XPe only. Do not attempt to install them on other devices.
Two sets of files are provided for each I8800 I/Port update:
• The local installer, in a folder named Stand Alone.
• The Grid Center remote installer, in a folder named GC Push.
The local installer is an executable file that is run by physically carrying the file to the I8800 I/Port on a
Mass Storage Device such as a key drive, and then executing it.
Technical Bulletin Update Description Update Filename
TB0081, Updating an I8800 I/Port Provides additional WMI support for Grid
Center 4.0
GC1759b-121304.zip
TB0083, I8800 I/Ports Require
Update for Grid Center 4.1
Informational notice included in I/Port carton See TB0084
TB0084, I8800 I/Ports Require
WMI Update for Grid Center 4.1
Provides additional WMI support and
updated Grid Center Client application for
Grid Center 4.1
WMI-UPDATE.zip
TB0087, I8800 I/Port Update:
Printer Redirection
Provides support to allow connecting I8800 I/
Ports to USB printers
RdpConnect.zip
TB0093, I8800 I/Port Update:
Sasser Virus Scanner
Provides a scanner/remover for the Sasser
virus
Sasser_update.zip
TB0094, I8800 I/Port Update:
Berbew Virus Scanner
Provides a scanner/remover for the Berbew
virus
Bewbew_update.zip
TB0110, I/Port I8800 Update:
Microsoft Internet Connection
Firewall
Provides the Microsoft Internet Connection
Firewall (ICF) to provide baseline protection
against intrusion
Iport_firewall.zip

ClearCube Public Technical Document
Document Code: TB0162JS
ClearCube Technology 8834 Capital of Texas Hwy N Austin, Texas 78759 voice 512 652 3500 www.clearcube.com
The Grid Center remote installer is run from the Grid Center Console, in the Update View, and can be
applied to multiple I8800 I/Ports or I/Port groups simultaneously.
The following procedures provide a high-level description of the tasks needed to install an update. For
detailed information and instructions, consult the appropriate Technical Bulletin.
To apply update locally, do the following:
1. Log in to the I/Port as administrator.
2. Disable the write filter.
3. Copy the update installer file to the I/Port.
4. Double-click the installer file. The update installs automatically and reboots the I/Port.
Note: Do not press any keys during the update. Allow it to run undisturbed.
5.
Delete the installer file from the I/Port and re-enable the Write Filter.
To apply the update remotely using Grid Center, do the following:
1. Load the update file onto a volume accessible by the Grid Center Console.
2. Start Grid Center (if it is not already running).
3. From the Update View in Grid Center, select an individual I/Port or an I/Port Group to update.
4. Specify the path and name of the Update and Answer files, including the file extension (you can browse
for these files), and press the Update button.
For more information, please contact ClearCube technical support.
[email protected] Email address for ClearCube Technical Support
support.clearcube.com ClearCube Support Website
[phone] Direct line in the US
[phone] Direct line from outside the US