ClearSounds Freedom Phone CSC1000 User manual

QUICK START GUIDE
ClearSounds®CSC1000
Amplified Freedom Phone™
with Full ClearDigital Power™
Service in United States and Canada, contact:
ClearSounds Communications
Attention: Repair Center
1743 Quincy Avenue, Suite 155
Naperville, IL 60540 USA
800-965-9043 or www.clearsounds.com
Printed manual available upon request
(21) Make/Answer/End a call
Activates the speakerphone if
pressed during a call
(22) Last number redial or insert
a pause when pre-dialing a
number
(6) Up or Down or scroll for menu
options. Enter the CID book
Soft Keys (4 & 5) Perform the function
indicated by the text immediately over it
(on the bottom line of the display).
(23) Press to add an extra level of
amplification & tone
(14) Voice Mail phone number
(24) Emergency phone number
(25) Use to store numbers
(15) To disconnect a call and
re-establish dial tone or to
switch over to another caller if
you use call waiting
KEY DESCRIPTIONS (#) Denotes item in Figure 1
Press to start or stop the Message or Memo playing
Press to play the next message
Press once to play the current message
Press twice to play the previous message
When playing an incoming message, press this key
to delete the current message
Press and hold this key to record a memo (it will be
stored as a new message)
Use to adjust the volume of the ringer, talking
dialing and talking Caller ID
ANSWERING MACHINE KEY DESCRIPTIONS
To Turn the Answering Machine ON/OFF
1.Press the Menu soft key to display the main menu list.
2.Press ▲or ▼to move to TAM setup and then press the
Select soft key.
3.Press the Select soft key to choose TAM ON/OFF.
4.Press ▲or ▼to ON or OFF and then press the Save
soft key.
5.To exit, press the Back soft key to return to the previous
screen and then press the Exit soft key to return to the
main screen. Otherwise, after 1 minute, the display
will automatically return to the main screen.
To Access a MENU Option
1.To display the menu list, press the Menu soft key.
2.To scroll through menu options, press ▲or ▼repeatedly.
3.To select a menu item, Press the Select soft key when the
desired menu item appears on the display.
4.Repeat if necessary.
To Exit from any MENU
If you press the Back soft key or the Exit soft key, the
phone returns to the previous screen.
MENU MAP
Set Display Date and Time
Set Language (N/A)
Set Contrast Set Talk
Level 1-7 DIALING TALKING
Dim: X--->x ON or OFF
ON or OFF CID TALKING
Hour Format ON or OFF
12-hr clock or 24-hr clock REVIEW TALKING
Date Format ON or OFF
MM/DD or DD/MM
TAM setup
Set Phone TAM ON/OFF
Set Ring Outgoing Msg
Day volume Play OGM
Night volume Record OGM
Ringer tone Change OGM
VIP tone Erase OGM
Keypad Tones Ring Number
Call Waiting 3 to 6 rings, toll saver
ON or OFF Security ID
ICM Voice Slow
Set Flash
100ms, 110 ms, 300ms, 600ms
Dialing Mode
Tone or Pulse
MENU OPERATION
TELEPHONE ANSWERING MACHINE (TAM) OPERATION

PARTS CHECKLIST
HANDSET &
HANDSET CORD
WALL PLATE
ADAPTER USER’S MANUAL
TELEPHONE LINE
CORDS (ONE 8 INCH &
ONE 6 FOOT CORD)
AC ADAPTER
(7.5v/500mA)
PHONE BASE
PHOTO TEMPLATE
CONNECTING YOUR PHONE LOCATION OF CONTROLS
1. CHECK PARTS LIST
2. PRE-SELECT AUXILIARY FEATURES:
a. AMPLIFICATION: Amplify Override ON / OFF
b. RINGER: Strobe & Shaker / Only Shaker / Only Strobe
3. PHONE INSTALLATION: The phone should be located in
an area where it is easy to see the visual display and lighted
ringer. Choose an area near a telephone wall jack (RJ11C)
and power outlet. The telephone may be placed on a shelf
or table or may be fixed to the wall using the wall plate
adapter (mounting bracket). Begin by removing the clear
plastic Caller ID protective tab.
Desk / Table Mounting
1. Plug the AC power adapter into the jack on the back
of the telephone. Wait until the phone is completely
setup before plugging the AC adapter into the electrical
outlet or surge protector.
2. Connect one end of the 6 ft telephone cord to the line
jack on the back of the phone and connect the other
end to a modular phone jack.
3. Connect one end of the coiled handset cord to the
handset and the other end to the phone base.
4. Lift the handset and listen for the dial tone.
Wall Mounting
1. Adjust he handset hanger tab so that the hook points
up. This will keep the handset from falling out of the
cradle when it is mounted on the wall.
2. Plug the AC power adapter into the jack on the back of
the telephone (complete setup before plugging the AC
adapter into the electrical outlet or surge protector).
3. Plug the 8-inch short phone cord into the telephone
jack on the phone.
4. Insert the wall plate adapter by lining it up with the
holes on the phone, then push the wall plate adapter
in towards the phone and slide the plate upwards until
it is securely seated on the phone.
5. With the wall plate adapter installed, plug the 8-inch
short phone cord into the jack on the wall.
6. Mount phone onto wall jack mounting screws (dry wall
mounting, see page 14.
7. Plug the AC power adapter into the electrical outlet.
8. Connect the handset using the coiled handset cord and
listen for a dial tone.
01. Hook Switch 16. Headset Key
02. Handset Hanger Tab 17. Message waiting /
03. Large LCD/Caller ID Screen New call LED
04. Left Soft Key 18. In Use LED Indicator
05. Right Soft Key 19. Visual Phone Ringer
06. Up/Down Scroll 20. Microphone
07. Handset Tone Control 21. Speakerphone Key
08. Handset Volume Control 22. Redial Key
09. Play/Stop Key 23. Amplify Activation Key
10. Next Key 24. Emergency Memory Key
11. Previous Key 25. Prog – Program Key
12. Delete Key 26. (8) 1-Touch Photo
13. MEMO Key Memory Dial Keys
14. Voice Mail Key 27. Lighted Keypad
15. Call Waiting Key 28. Speaker
1 2
3
7
8
6
4
9
5
10
11
12
13
14
15
16
21
17
19
18
202325 222426
28
27
If at any time you have questions about your
telephone after reading this manual, please
contact our ClearSounds®Customer Service
Department at 1-800-965-9043.
Figure 1