Click Medical QuickFit Lacer User manual

1
34
2
Compatible With:
QuickFit™ Lacer SM: OK0200-130-05
QuickFit™ Lacer MD:OK0220-130-05
Pull to release dial from tensioning
Snip lace at port entrance to remove dial from system. Feed new lace through all guides.
Insert flat head screwdriver in tab with arrow indicator located
on top of bayonet.
1x Replacement Lace, 1.5m 1x Replacement Dial
12
(MDD) - 93/42/EEC
REF OK0100
15
Click Medical, LLC
1205 Hilltop Parkway
Warehouse 101
Steamboat Springs, CO, USA
[phone]
EC REP Click Medical, LLC
9 Rue Michel Chauvet
Geneva 1208
Switzerland
harmonized standard
& notified body
QuickFit™Lacer
Replacment Dial Kit
For help visit Clickmedical.co/support
Size: SM/MD
RP0200-130-05
POP!
[email protected] Help Line: 970 670 7012
Accidents happen, WE GET IT!
For any warranty or product failure please DO NOT return
to distributor, simply contact CLICK MEDICAL DIRECTLY AT:

CLICK!
5Take new dial and press down to close dial.
8Snap dial fully into bayonet.
6On back of new dial, turn until two arrows sync
with each other.
9Cycle system to test function. Push to engage. Twist to
tighten. Pull to release.
7Feed right lace through through right reel exit. Tie off with
single overhand knot.
4mm - 7mm
Up to 20cm
Knot and tail should
not be visible
1
1
3
2
2
4
Allow up to 20 cm of slack lace per lace port. Cut to size.
Pull knots into port. Repeat for opposite side of dial.
CLICK!