Clinical innovations ClearView User manual

Quick Reference Guide
1Check Device 3Attach Spacer*
4Insert Device 5 Inate Tip Balloon 6 Rotate Control Handle
7 Remove & Discard
2 Sound Uterus
Determine uterine length, select
appropriate size device.
NOTE: Tip length should be
1cm less than sounded length.
Check sterile tray integrity. Instill (10ml max)
uid to check tip balloon, then remove uid.
If needed, attach 1cm spacer.
*SPACER IS OPTIONAL
Remove uid from tip balloon, return uterus
to natural position, remove device and
discard.
Lubricate distal tip, insert into uterine cavity
until spacer abuts external cervical os.
Rotate the control handle to manipulate the
uterus.
Slowly instill uid (max 10ml) into tip
balloon until device is pulled tight against
cervix.
NOTE: Cervix must be dilated to
5.5mm prior to insertion.
See Instructions for Use for full instructions,
warnings, precautions & contraindications
NOTE: Push down until spacer
“clicks” in place.
NOTE: Check device and spacer (if used)
are intact.
NOTE: Clockwise = anteversion
Counter clockwise = retroversion
Lateral = right and left

Quick Reference Guide
10 Remove & Discard
4 Attach Colpotomy Cup 5Insert Device
6 Inate Tip Balloon 7 Rotate Control Handle 8 Inate Occluder
9 Uterine Incision
Remove uid from tip balloon, return
uterus to natural position, remove device
and discard.
Lubricate distal tip, insert into uterine cavity
until cup abuts external cervical os.
Select the correct size cup, attach cup to
spacer or tip support.
Perform uterine incision. Use cup as visual
guide to delineate tissue. Do not use cup as
physical guide to rest instrument.
Slowly instill uid (max 10ml) into tip balloon
until device is pulled tight against cervix.
Prior to colpotomy incision, advance
occluder balloon into vagina. Inate (60-
120ml uid).
Rotate the control handle to manipulate
the uterus.
NOTE: Clockwise = anteversion
Counter clockwise = retrover-
sion Lateral = right and left
NOTE: Rotate clockwise to
lock in place.
NOTE: Cervix must be dilated to 5.5mm prior
to insertion. Vaginal retractors, speculum,
tenaculum can be used to insert.
Steps 1 & 2 are the same as ClearView Quick Reference Guide
3Attach Spacer*
*If necessary, attach 1cm spacer.
NOTE: Slide down over groove, then
rotate clockwise to lock in place.
clinicalinnovations.com.au
36 Matheson Street, Virginia
Queensland 4017 | Australia
Phone [phone] | Fax [phone]
[email protected]
© Clinical Innovations, LLC. All rights reserved. | ART-0133 Rev. 02
Local Distributor:
See Instructions for Use for full in-
structions, warnings, precautions
& contraindications
NOTE: Check device, spacer (if used)
and colpotomy cup are intact.
NOTE: Clockwise = anteversion
Counter clockwise = retroversion
Lateral = right and left