CNI Jump Start juicer User manual
INSTRUCTION MANUAL
Another Quality Product from
www.creativenations.com
Copyright 2007©•CNI-Creative Nations International
Jumpstart Manual Final
Thursday, November 13, 2008 12:58:38 PM
21
1.) Please verify the voltage of you Jump Start Juicer before connecting with
any source of electricity. The voltage is clearly marked on the bottom of
the appliance.
2.) Do not use outdoors. Your appliance is made solely for indoor use.
3.) Do not operate the appliance if cord or plug has been damaged. It must be
replaced by the manufacturer or its service agent or a similarly qualified
person to avoid any injury.
4.) Never leave the appliance within reach of children without supervision.
The use of this appliance by young children or by disabled person must be
supervised.
5.) Unplug the juicer before cleaning; transporting; and after use.
6.) Do not place the appliance, its power cable plug in water or in nearby
liquids.
7.) Do not insert your finger or hand inside the feeder chute.
8.) Keep away from explosives and flammable fumes.
9.) Do not place near heat sources such as cooking stove. Operation failure
may occur.
10.)Always place juicer on a dry flat surface.
11.) Do not touch the plug with wet hands.
12.) If appliance malfunctioned or has been damaged in any manner, return
it immediately to the servicing agent for examination, repair and
adjustments.
Built-in Safety Lock Overheating Protection
This appliance is equipped with built-in
safety lock that prevents it from functioning
if the accessories are not assembled
correctly. Make sure to fasten the side of
the clams securely.
This appliance is made with an overheat
protector. The unit will cease to operate if
overheated. Allow to cool for 10 minutes
before resuming operation.
Technical Parameters and Electrical Diagram
Voltage: 220V~
Frequency: 50Hz
Power:300W
Rate continuous
working period: 1 min
CONGRATULATIONS on your purchase of the
incredibly versatile Jump Start Juicer. The Jump Start
Juicer quickly and efficiently extracts out the goodness,
nourishment, essential minerals and vitamins you need!
It has been specifically designed to work in conjunction
with the Jump Start Program, which contains over 100
great tasting natural juice recipes, created to give you
immediate weight loss, boost your energy and increase
your confidence.
We genuinely hope you enjoy using your Jump Start
Juicer!
Jumpstart Manual Final
Thursday, November 13, 2008 12:58:39 PM
43
Food Pusher
Cover
Mid Ring
Clam
Pulp Container
Base
Juice Outlet
Main Body
Switch Knob
1.) Mount the mid ring container on the motor house and ensure it is
seated properly.
2.) Place the juice-extracting filter into the assembled container and press
down slightly.
3.) Place the transparent cover and twist the clam counter clockwise.
4.) Place cup or container to collect the juice. Put the pulp container in place
before inserting the fruits.
5.) When finished using the juice extractor, push the mouth
of pulp container, and then take it out.
6.) See diagram how to remove mid ring and juice-
extracting filter.
I
0
I
*
I
Grinding Cup
(Chopping Cup)
Switch
Grinding Blade
(Chopping Blade)
Juice Extractor
Cover
Juice Blender
Nano Sieve
Juice Extracting Filter
Jumpstart Manual Final
Thursday, November 13, 2008 12:58:49 PM
65
1.) Lift the safety clips from underneath and pull outwards until the clips are
facing down.
2.) Lift off the feeder chute lid and remove the juicer-extracting and filter.
3.) Insert the accessory connector, make sure the raised sections are
outwards facing and are in line with the safety clips.
4.) Lift the accessory clips and place them into the accessory connector
until the grooves meet, once the clips are secure, push the clips down
to lock the connector into place.
5.) Insert the blender into the accessory connector and twist counter
clockwise until the grinder or chopper is secure.
6.) When using the blender, slice food into smaller pieces to prolong the
life of its motor. If the blades are stuck, switch off the unit, and remove
any obstructions. Be careful of the sharp blades.
7.) Safety Interlocking Switch: The unit will not work if the safety clips are
not properly locked.
8.) Once you have finished blending, twist the blender clockwise and
remove it from the accessory connector.
9.) If you have any type of food that needs sifting, place the Nano Sieve in the
Blender Cup. Place the food in the Nano Sieve and lock the lid in place .
Do not use the Nano Sieve to make smoothies or shakes.
Grinding Cup Chopping Cup
Switch
Nano Sieve
Clean and Care
1.) Lift the safety clips from underneath and pull outwards until the clips are
facing down.
2.) Lift off the feeder chute lid and remove the juice-extracting filter.
3.) Insert the accessory connector, make sure the raised sections are
outwards facing and are in line with the safety clips.
4.) Separate the grinder’s or chopper’s base from its cup by holding the
base and turning the cup counter clockwise. Turn the base upside down
and fill the cup with the desired contents, then re-assemble the
grinder or chopper base by turning clockwise.
5.) Insert the complete grinder or chopper into the accessory connector
and twist counter clockwise until the grinder or chopper is secure.
6.) After grinding or chopping, twist the grinder or chopper clockwise and
pull it away from the cup.
1.) Wipe the base unit with a damp cloth, if necessary, use a little mild
detergent.
2.) Do not immerse the base unit in water, do not allow liquid to get inside
it.
3.) The other parts should be washed in hot soapy water. Rinse well and
dry thoroughly before storing.
4.) The juice-extracting filter should be scrubbed inside out to remove all
traces of pulp.
5.) All removable parts are dishwasher safe except the main power unit.
Should the pulp container be discolored by certain food (such as
carrots), wipe gently with a little vegetable oil on a cloth and wash as
usual.
6.) Do not use harsh or abrasive cleaners.
Cover
Chopping Blade
Jumpstart Manual Final
Thursday, November 13, 2008 12:58:52 PM
