Coaster 106592 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0: 11/08/2015
REVISION 1: 12/01/2017
Dining Side Chair
106592
COASTERFURNITURE.COM
PAGE 1 OF 5
REVISION 2: 02/25/2020

LOWER LEG FRAME
UPPER LEG FRAME 1PC
WOOD CLEAT
SEAT AND BACK
1PC
1PC
NOTE :
Phillips head screw driver is required in the assembly process.However,manufacturer does not provide this item.
Quantities shown are for one chair.
HARDWARE IDENTIFICATION
AN
BOLT
(M6 x 70mm - RBW)
ALLEN WRENCH
(M4 x 110mm - BLK)
4PCS
1PC
PARTS IDENTIFICATION
BN
1
2
3
5
ITEM :
ASSEMBLY TIME 10 MINUTES
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
106592
PAGE 2 OF 5
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS :
WARNING !
COASTERFURNITURE.COM
CN
DN
LOCK WASHER
(1/4" - BLK)
2PCS
44PCS
8PCS
1PCS
6
FLAT WASHER
(M6 x 13mm - RBW)
ALLEN HEAD SCREW
(M7 X 50MM ZB(10#) - ZB)
PAN HEAD SCREW
(M4 x 30mm-BLK)
4PCS

BACK
FRONT
BN
AN
PRE-DRILLED HOLES
TO FIX CORNER BLOCKS
ITEM :
STEP 1
STEP 2
ASSEMBLY INSTRUCTIONS
PAGE 3 OF 5 COASTERFURNITURE.COM
106592
BACK
FRONT
BACK
FRONT
FRONT
BACK
BN
AN

1
ITEM :
STEP 3
STEP 4
ASSEMBLY INSTRUCTIONS
PAGE 4 OF 5 COASTERFURNITURE.COM
BN
FRONT
AN
BACK
FRONT
BACK
CN
2
3
4
AN
BN
CN
106592

ITEM :
STEP 5
STEP 6
COMPLETE
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 5 COASTERFURNITURE.COM
DN
DN
CN
5
106592

35.43"
18.70"
ITEM :
COASTERFURNITURE.COM
13.39"
17.91"
15.55"
15.75"
19.29"
17.72"
21.65"
17.72"
106592