Coaster 305878Q User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
COASTERFURNITURE.COM
PAGE 1 OF 2
PAGE 1 OF 10
305878Q (B1&B2)
Queen Bed
REVISION 0 : 07/25/2019

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PAGE 2 OF 10 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
HAEDBOARD PANEL
A
LEFT HEADBOAD
LEG (WITH “L” LABEL)
B
RIGHT HEADBOARD
LEG (WITH “R” LABEL)
C
DRAWER BACK PANEL
(WITH “D” LABEL)
D
1PC
1PC
1PC
4PCS
F
G
H
4PCS
4PCS
8PCS
DRAWER LEFT SIDE PANEL
(WITH “E” LABEL)
E 4PCS ROLL SLAT
(13pcs)
J 1SET
DRAWER RIGHT SIDE
PANEL (WITH “F” LABEL)
BOTTOM PANEL
DRAWER SUPPORT
CASTER WITH
SCREW
I 16SETS
B1 (BOX 1)
DRAWER FRONT PANEL
K
FOOTBOARD FRAME
L
FOOTBOARD LEG
M
BED RAIL
N
4PCS
1PC
2PCS
2PCS
CENTER RAIL SUPPORT
WITH LEVELER
Q 3PCS
OBED RAIL
SUPPORT LEG
CENTER RAIL
P
4PCS
1PC
B2 (BOX 2)

ITEM:305878Q (B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 10 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
4
5
6
8PCS
16PCS
11PCS
14PCS
14PCS
38PCS
SHORT BOLT
(M8 x 20MM - RBW)
MEDIUM BOLT
(M6 x 35MM - RBW)
LONG BOLT
(M6 x 50MM - RBW)
LOCK WASHER
(15/64” X 13 Ø - RBW)
FLAT WASHER
(15/64” X 19 Ø - RBW)
FLAT HEAD SCREW
(M4 x 32MM - RBW)
7
8
9
64PCS
1PC
1PC
WOOD DOWEL
(M8 x 30MM)
SMALL ALLEN WRENCH
BIG ALLEN WRENCH
(M4 x 65MM - BLK)
(M5 x 65MM - BLK)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 305878Q (B2)
ASSEMBLY INSTRUCTIONS

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 10 COASTERFURNITURE.COM
STEP 2
A
C
B
8
3
4
5
L
M
M
M
L
3
(WITH ‘L’ LABEL)
(WITH ‘R’ LABEL)
8
BACK VIEW

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 3
PAGE 5 OF 10 COASTERFURNITURE.COM
STEP 4
8
2
4
5
O
NO
O
A
B
C
N
N
L
N
19
O
O

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 5
PAGE 6 OF 10 COASTERFURNITURE.COM
STEP 6
J
Q
P
J
P
Q
3
8
J
6
J
N

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 7
PAGE 7 OF 10 COASTERFURNITURE.COM
STEP 8
DF
K
G
F
D
K
7
6
(WITH ‘F’ LABEL)
(WITH ‘D’ LABEL)
(WITH ‘D’ LABEL)
(WITH ‘F’ LABEL)

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 9
PAGE 8 OF 10 COASTERFURNITURE.COM
STEP 10
H
H
H
H
E
7
7
7
7
7
6
K
(WITH ‘E’ LABEL)

ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 11
PAGE 9 OF 10 COASTERFURNITURE.COM
STEP 12
I
2
8
12.2
12.1

COMPLETE
ITEM:305878Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 13
PAGE 10 OF 10 COASTERFURNITURE.COM

COASTERFURNITURE.COM
ITEM:305878Q (B1&B2)
Note : Dimension tolerance ±5%
INNER SIZE : 60.83" x 81.10"
INNER SIZE OF DRAW ER BOX : 22.76" x 17.72" x 5.91"
52.36"
64.37"
81.10 "
84.84 "
25.79 "
2.36"
56.30"
61.22"
15.75"
12.60"
57.28"
38.58"
1.77"
85.43 "
9.13"
25.39"
13.50"
26.38"
9.13"
25.39 "
INNER SIZE : 60.83" x 81.10"
INNER SIZE OF DRAW ER BOX : 22.76" x 17.72" x 5.91"