Coaster 110732 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
110732
Dining
Chair
REVISION 0 : 06/15/2020PAGE
1 OF 4 COASTERFURNITURE.COM

ITEM:110732
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1ALLEN WRENCH
(M4 x 65mm - BLK)
1PC
2LONG BOLT
(M6 x 80mm - BLK)
4PCS
3MEDIUM BOLT
(M6 x 60mm - BLK)
4PCS
4SHORT BOLT
(M6 x 35mm - BLK)
3PCS
5LOCK WASHER
(M6 - BLK)
11PCS
6FLAT WASHER
(M6 - BLK)
11PCS
7FLAT HEAD SCREW
(M4 x 30mm - BLK)
4PCS
NOTE:
Quantities shown are for one chair.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
D SEAT CUSHION 1PC
PAGE 2 OF 4
B SEAT FRAME 1PC
C FRONT LEG 2PCS
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
15 MINUTES
PARTS IDENTIFICATION
A BACK FRAME 1PC

ITEM:110732
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 4

ITEM:110732
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 4

ITEM:110732
Note : Dimension tolerance ±5%
COASTERFURNITURE.COM