Coaster 192029 User manual

www.coastercompany.com
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
192029
PAGE 1 OF 4
REVISION 0: 11/20/2018
COUNTER HEIGHT CHAIR

2
1
LOCK WASHER
(1/4" - RBW)
LONG BOLT
(M6 x 80mm - RBW)
ALLEN WRENCH
(M4 x 110mm - BLK)
HARDWARE IDENTIFICATION
4PCS
1PC
ASSEMBLY INSTRUCTIONS
ITEM : 192029
PARTS IDENTIFICATION
1PC
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR.
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY
PROCESS ; HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PART NAME FIGURE QTY
HARDWARE NAME FIGURE QTY
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
immediately.
ASSEMBLY TIPS :
Warning!
ASSEMBLY TIME 30 MINUTES
PAGE 2 OF 4
www.coastercompany.com
PAN HEAD SCREW
(#8 X 1-1 /2" - BLK)
C
A
B
D
WOODEN SEAT WITH FRAME
E
LEFT FRONT LEG
RIGHT SIDE STRETCHER
LEFT SIDE STRETCHER
3
4
5
6
7
MEDIUM BOLT
(M6 x 60mm - RBW)
SHORT BOLT
(M6 x 40mm - RBW)
FLAT WASHER
(1/4" - RBW)
RIGHT FRONT LEG
FRONT STRETCHER
F
G
BACK FRAME
1PC
1PC
1PC
1PC
1PC
1PC
4PCS
2PCS
10PCS
10PCS
6PCS

STEP 3
192029
ITEM :
STEP 1
ASSEMBLY INSTRUCTIONS
STEP 4
STEP 2
PAGE 3 OF 4
www.coastercompany.com
BOTTOM VIEW
7
1
4
5
6
E
F
1
2
5
6
A
G
5
C
D
BOTTOM VIEW
BOTTOM VIEW
7

192029
ITEM : ASSEMBLY INSTRUCTIONS
PAGE 4 OF 4
www.coastercompany.com
STEP 5
COMPLETE