Coaster 120361 User manual

120361 (B1 & B2)
GLASS TOP DINING TABLE WITH
STAINLESS STEEL
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
REVISION 0 : 01/21/2011
PAGE 1 OF 3
www.coastercompany.com
REVISION 0 : 01/21/2011
REVISION 1 : 10/12/2011

ITEM:120361 (B1 & B2) ASSEMBLY INSTRUCTIONS
www.coastercompany.com
PAGE 2 OF 3
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
Warning !
1.Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
2.This product is for home use only and not intended for commercial entablishment.
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
1
A
B
GLASS TOP WITH
METAL PLATE
1 PC
1 SET
TABLE LEG
2
3
4
SHORT BOLT
LONG BOLT
ALLEN WRENCH
LOCK WASHER
4 PCS
2 PCS
1 PC
6 PCS

STEP 1
ITEM:
120361 (B1 & B2) ASSEMBLY INSTRUCTIONS
PAGE 3 OF 3
www.coastercompany.com
STEP 2
STEP 3
Remove the leg protector from table leg with screw driver. (Not provided)
Place table top upside down on soft surface. Align and fasten legs to the metal plate of the glass top using
short bolt, long bolt and lock washer and tighten with Allen wrench.
Flip over table using two people to lift and flip this table.
1
3
2
B
4
1
A
4
4