Coaster 902762 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 11
REVISION 0 : 11/07/2016
REVISION 1 : 06/18/2019
902762
ACCENT CABINET

902762
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 11
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
60 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CBOTTOM PANEL 1 PC
DTOP PANEL 1 PC
ETOP PANEL 1 PC
FBACK BRACE 1 PC
GBACK PANEL 2 PCS
HDRAWER
FRONT PANEL 3 PCS
IDRAWER BACK
PANEL 3 PCS
JLEFT DRAWER
SIDE PANEL 3 PCS
KRIGHT DRAWER
SIDE PANEL 3 PCS
LDRAWER
BOTTOM PANEL 3 PCS
MDRAWER
SUPPORT 3 PCS
NMETAL FRAME 2 PCS

902762
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 11
HARDWARE IDENTIFICATION
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Z
NO DESCRIPTION FIGURE Q’TY
1GLUE 40g 1 PC
2WOODEN DOWEL
Ø 8x30mm 22 PCS
3CAM BOLT
Ø 7x35.5mm 19 PCS
4CAM LOCK
Ø15x12mm 19 PCS
5DRAWER SCREW
Ø 4.3x35mm 15 PCS
6GLIDES
L = 300mm DR
DL
CL
CR 3 SET
7GLIDES SCREW
Ø 3x12mm 36 PCS
8HANDLE 6 PCS
NO DESCRIPTION FIGURE Q’TY
9HANDLE BOLT
Ø 4x23mm 12 PCS
10 BOLT
M6x43mm 4 PCS
11 SCREW
Ø 4x12mm 8 PCS
12 ALLEN WRENCH 1PC
13 FIXER 6 PCS
14 FIXER SCREW
Ø 3x19mm 6 PCS
15 STICKER
Ø 20mm 4 PCS
Z6,Z8,Z9 not included in blister packaging.

902762
ITEM:
PAGE 4 OF 11 COASTERFURNITURE.COM
6 x 3 7
x 18
3
x 10
CL
CR
2
x 10
(CL)
(CR)
6
7
AB
6 (CL)
6 (CR)
7
3
7
D
C
2
F
INCORRECT
CORRECT
STEP 1

902762
ITEM:
PAGE 5 OF 11 COASTERFURNITURE.COM
x 4
11
N
A
11
x 4
11
N
B
11
STEP 2
STEP 4
STEP 3
x 5 x 5
4 15
F
D
C4
1
A
4
15
Apply glue on all wooden dowels to
ensure integrity of the structure.

902762
ITEM:
PAGE 6 OF 11 COASTERFURNITURE.COM
G
C
D
G
A
F
STEP 5
STEP 6
x 5 x 5
4 15
4
B
C
D
A
1
F
Apply glue on all wooden dowels to
ensure integrity of the structure.

902762
ITEM:
PAGE 7 OF 11 COASTERFURNITURE.COM
STEP 7-1
STEP 7-3
STEP 7-5
STEP 7-2
STEP 7-4
Apply glue on all wooden dowels to
ensure integrity of the structure.
1H
J
K
I
L
M
H x3
Jx3
K x3
3
x 9
2 x12
4 x9
15 x9
5 x15 8 x6
9 x12
6 (DL)
(DR)
7
6(DR)
6(DL) 7 x18

902762
ITEM:
PAGE 8 OF 11 COASTERFURNITURE.COM
STEP 9
STEP 8
E
A
B
x 4
10
12
10
12
H
H
H

902762
ITEM:
PAGE 9 OF 11 COASTERFURNITURE.COM
13
14
13
14
G
G
STEP 11
STEP 10
COMPLETE

902762
ITEM:
PAGE 10 OF 11 COASTERFURNITURE.COM
829mm(32.5")
350mm(13.75")
99mm(3.75")
121mm(4.75")
97mm(3.75")
883mm(34.5")
395mm(15.5")
900mm(35.25")
745mm(29.25")
284mm(11")
125mm(4.75")
795mm(31.25")
204mm(8")
Note : Dimension tolerance ±5%

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 11 OF 11 COASTERFURNITURE.COM