Coaster 150157 User manual

5 PCS DINING SET
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
150157
PAGE 1 OF 4 REVISION 0 : 06/19/2011
REVISION 1 : 09/26/2011

ITEM : 150157 ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
www.coastercompany.com
PAGE 2 OF 4
4PCS
SPRING WASHER 1/4 36 36 PCS
FLAT WASHER 1/4 36 PCS
4 PCS
4PCS
4PCS
8PCS
E
TABLE LEG
BACK CHAIR
SEAT CUSHION
FRONT LEG
A
B
C
D
2
LONG NJCBC BOLT 5/16 X 80 MM 8 PCS
SPRING WASHER 5/16
1
ALLEN KEY 5MM
8 PCS
1 PC
8 PCS
FLAT WASHER 5/16
TABLE TOP 1 PC
7
8
9
10
3
4
5
6
ALLEN KEY 4MM 1 PC
LONG NJCBC BOLT 1/4 X 75 MM 16 PCS
LONG NJCBC BOLT 1/4 X 60 MM 16PCS
NJCBC BOLT 1/4 X 35 MM
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
! Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
www.coastercompany.com
Flip table over using two people to lift and flip this table.
PAGE 3 OF 4
150157
ITEM :
Place table top upside down on soft surface. Align and fasten table legs to table top using longest bolt, big lock
washer, big flat washer and tighten with allen wrench.

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
www.coastercompany.com
Align and hand tighten front legs to seat frame using medium bolt, small lock washer and small flat washer. Tighten
all bolts with allen wrench.
PAGE 4 OF 4
150157
ITEM :
Lay down chair back on soft surface. Align and hand tighten seat frame to chair back bottom rail using short bolt,
small lock washer and small flat washer. Align and hand tighten seat frame to chair back leg using long bolt,small
lock washer and small flat washer.