Coaster 105512 User manual

105512
DINING SIDE CHAIR WITH PU CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
AG 1 O 3
REVISION 0 : 01 / 16 / 2015
PAGE 1 OF 3

ITEM : 105512 ASSEMBLY INSTRUCTIONS
1 PCCHAIR BACK
PARTS IDENTIFICATION
A
C
1 PCCUSHION SEAT WITH FRAME
FRONT LEG 2 PCS
B
HARDWARE IDENTIFICATION
HARDWARE IDENTIFICATION
1 LONG BOLT 4 PCS
MEDIUM BOLT
4PCS
2
4
SHORT BOLT
MEDIUM
BOLT
4
PCS
1 PC
9 PCS
3
2
LOCK WASHER
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR
1 PC6
www.coastercompany.com
5 FLAT WASHER
ALLEN WRENCH
9 PCS
PAGE 2 OF 3

ITEM : 105512
STEP 1
1.1 ) Align and fasten cushion seat with frame (B ) to chair back ( A ) leg using long bolt ( 1 ), lock washer ( 4 ) and flat washer ( 5 ).
ASSEMBLY INSTRUCTIONS
1.2 ) Align and fasten cushion seat with frame ( B ) to chair back ( A ) bottom rail, using short bolt ( 3 ), lock washer ( 4 ) and flat washer ( 5 ).
1.1
1.2
STEP 2 STEP 3
Align and fasten front leg ( C ) to cushion seat with frame ( B ) COMPLETED
using medium bolt ( 2 ), lock washer ( 4 ) and flat washer ( 5 )
and fully tighten with Allen wrench ( 6 ).
www.coastercompany.com
PAGE3OF3
PAGE 3 OF 3
DO NOT FULLY TIGHTEN AT THIS STEP.
THEN FULLY TIGHTEN ALL THE BOLTS AT STEP 1.1 & 1.2 WITH ALLEN WRENCH ( 6 )